3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA250A1PWR
Texas Instruments · Current Sense Amplifiers · TSSOP-16
INA250A1PWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN- | input | Analog input connected to load. |
| 2 | IN- | input | Analog input connected to load. |
| 3 | IN- | input | Analog input connected to load. |
| 4 | SH- | output | Analog output, Kelvin connection to internal shunt; connect to VIN- if no filtering is needed. |
| 5 | VIN- | power_in | Analog input, voltage input from load side of shunt resistor. |
| 6 | GND | power_in | Analog ground. |
| 7 | REF | input | Analog input, reference voltage 0 V to VS (up to 18 V). |
| 8 | GND | power_in | Analog ground. |
| 9 | OUT | output | Analog output, output voltage. |
| 10 | VS | power_in | Analog power supply, 2.7 V to 36 V. |
| 11 | GND | power_in | Analog ground. |
| 12 | VIN+ | power_in | Analog input, voltage input from supply side of shunt resistor. |
| 13 | SH+ | output | Analog output, Kelvin connection to internal shunt; connect to VIN+ if no filtering is needed. |
| 14 | IN+ | input | Analog input connected to supply. |
| 15 | IN+ | input | Analog input connected to supply. |
| 16 | IN+ | input | Analog input connected to supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Amplifiers/Comparators |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input range | VCM | -0.1 | 36 | V | 5 | ||
| Common-mode rejection (INA250A1) | CMR | 94 | 102 | dB | VIN+ = 0 V to 36 V, TA = –40°C to 125°C | 5 | |
| Offset current, RTI (INA250A1) | IOS | -100 | 15 | 100 | mA | ISENSE = 0 A | 5 |
| RTI offset vs temperature | dIOS/dT | 25 | 250 | μA/°C | TA = –40°C to 125°C | 5 | |
| Power supply rejection | PSR | -1 | 0.03 | 1 | mA/V | VS = 2.7 V to 36 V, TA = –40°C to 125°C | 5 |
| Input bias current | IB | -35 | 28 | 35 | μA | IB+, IB-, ISENSE = 0 A | 5 |
| Reference input range | VREF | 0 | 18 | V | Printed as 0 to (VS) up to 18 V; reference cannot exceed 18 V (footnote 3) | 5 | |
| Shunt resistance (SH+ to SH–), equivalent with onboard amplifier | RSHUNT | 1.998 | 2 | 2.002 | mΩ | Equivalent resistance when used with onboard amplifier | 5 |
| Shunt resistance used as stand-alone resistor | RSHUNT | 1.8 | 2 | 2.2 | mΩ | Used as stand-alone resistor; not intended for this use (footnote 7) | 5 |
| Maximum continuous current | ISENSE | -15 | 15 | A | TA = –40°C to 85°C | 5 | |
| Shunt short time overload | -0.05 | 0.05 | % | ISENSE = 30 A for 5 seconds | 5 | ||
| Shunt thermal shock | -0.1 | 0.1 | % | –65°C to 150°C, 500 cycles | 5 | ||
| Shunt resistance to solder heat | -0.1 | 0.1 | % | 260°C solder, 10 s | 5 | ||
| Shunt high temperature exposure | -0.15 | 0.15 | % | 1000 hours, TA = 150°C | 5 | ||
| Shunt cold temperature storage | -0.025 | 0.025 | % | 24 hours, TA = –65°C | 5 | ||
| System gain error | -0.3 | 0.05 | 0.3 | % | ISENSE = –10 A to 10 A, TA = 25°C | 6 | |
| System gain error over temperature | -0.75 | 0.75 | % | ISENSE = –10 A to 10 A, TA = –40°C to 125°C | 6 | ||
| Nonlinearity error | -0.03 | 0.03 | % | ISENSE = 0.5 A to 10 A | 6 | ||
| Maximum capacitive load | 1 | nF | No sustained oscillation | 6 | |||
| Swing to VS power-supply rail | -0.1 | -0.2 | V | RL = 10 kΩ to GND; printed as (VS) – 0.1 and (VS) – 0.2 V, relative to VS | 6 | ||
| Swing to GND | 25 | 50 | mV | RL = 10 kΩ to GND; relative to (VGND) | 6 | ||
| Operating supply voltage | VS | 2.7 | 36 | V | 6 | ||
| Quiescent current | IQ | 200 | 300 | μA | TA = –40°C to 125°C | 6 | |
| Specified temperature range | -40 | 125 | °C | 6 | |||
| Supply voltage | VS | 40 | V | 4 | |||
| Analog input current, continuous | -15 | 15 | A | Continuous current | 4 | ||
| Analog inputs IN+, IN– common-mode | -0.3 | 40 | V | Referenced to GND | 4 | ||
| Analog inputs VIN+, VIN– common-mode | -0.3 | 40 | V | Referenced to GND | 4 | ||
| Analog inputs VIN+ – VIN– differential | -40 | 40 | V | Differential (VIN+) – (VIN–) | 4 | ||
| Analog input REF | -0.3 | V | Referenced to GND; upper limit printed as VS + 0.3 V | 4 | |||
| Analog outputs SH+, SH– common-mode | -0.3 | 40 | V | Referenced to GND | 4 | ||
| Analog output OUT | -0.3 | V | Referenced to GND; upper limit printed as (VS + 0.3) up to 18 V | 4 | |||
| Operating free-air temperature | TA | -55 | 150 | °C | Operating | 4 | |
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Common-mode input voltage | VCM | 0 | 36 | V | 4 | ||
| Operating supply voltage | VS | 2.7 | 36 | V | 4 | ||
| Operating free-air temperature | TA | -40 | 125 | °C | 4 | ||
| Shunt resistance tolerance | 0.1 | % | Feature bullet: 分流电阻容差 0.1% (maximum) | 1 | |||
| Gain (INA250A1) | G | 200 | mV/A | 6 | |||
| Gain drift | 45 | ppm/°C | TA = –40°C to 125°C | 6 | |||
| Resistor temperature coefficient | 15 | ppm/°C | TA = –40°C to 125°C | 5 | |||
| Resistor temperature coefficient | 50 | ppm/°C | TA = –40°C to 0°C | 5 | |||
| Resistor temperature coefficient | 10 | ppm/°C | TA = 0°C to 125°C | 5 | |||
| Package resistance IN+ to IN– | 4.5 | mΩ | 5 | ||||
| Output impedance | RO | 1.5 | Ω | 6 | |||
| Bandwidth (INA250A1) | BW | 50 | kHz | CL = 10 pF | 6 | ||
| Slew rate | SR | 0.2 | V/μs | CL = 10 pF | 6 | ||
| Voltage noise density (INA250A1) | 51 | nV/√Hz | RTI | 6 | |||
| Junction-to-ambient thermal resistance | RθJA | 104.4 | °C/W | PW (TSSOP) 16 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 42.3 | °C/W | PW (TSSOP) 16 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 48.5 | °C/W | PW (TSSOP) 16 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 4.5 | °C/W | PW (TSSOP) 16 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 48 | °C/W | PW (TSSOP) 16 pins | 4 |
CAD (KiCad official)
- Symbol:
INA250A1PWR - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
ina250a1pwr-etched.step/ina250a1pwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina250a1pwr.step/ina250a1pwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
6cba5d06f12fea59, retrieved 2026-10-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).