3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownN32G401K8L7
Nations Technologies Inc · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-32(7x7)
N32G401K8L7 from Nations Technologies Inc, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply pin for the I/O pins and the internal regulator, 2.4 V to 3.6 V. |
| 2 | PD14-OSC_IN | bidirectional | 5V-tolerant (FTa) I/O that serves as HSE oscillator input (4-32 MHz) and offers USART2_TX, I2C2_SDA and TIM1_CH3N alternate functions. |
| 3 | PD15-OSC_OUT | bidirectional | 5V-tolerant (FTa) I/O that serves as HSE oscillator output and offers USART2_RX, I2C2_SCL and TIM1_CH2N alternate functions. |
| 4 | NRST | input | Active-low external reset input with internal pull-up of 30-70 kΩ (50 kΩ typical) at VDD = 3.3 V. |
| 5 | VDDA/VREF+ | power_in | Analog supply for ADC and comparators, 2.4 V to 3.6 V, must be connected to VDD, and also the ADC positive reference VREF+. |
| 6 | PA0 | bidirectional | 5V-tolerant (FTa) I/O with alternate functions such as USART2_CTS, TIM2_CH1, SPI1_MISO, UART4_TX and COMP1_OUT, and additional functions ADC_IN1, WKUP2, RTC-TAMP2 and COMP1/COMP3 inputs. |
| 7 | PA1 | bidirectional | 5V-tolerant (FTa) I/O with alternate functions such as USART2_RTS, TIM5_CH2, TIM2_CH2, SPI1_NSS and TIM1_CH1N, and additional functions ADC1_IN2 and COMP1_INP. |
| 8 | PA2 | bidirectional | 5V-tolerant (FTa) I/O with alternate functions such as USART2_TX, TIM5_CH3, TIM2_CH3, I2C2_SDA, COMP2_OUT and TIM8_CH1, and additional functions ADC_IN3, COMP2_INM and COMP1_INP. |
| 9 | PA3 | bidirectional | 5V-tolerant (FTa) I/O with alternate functions such as USART2_RX, TIM5_CH4, I2C2_SCL and TIM8_CH2, and additional functions ADC_IN4, COMP2_INP and COMP3_INM. |
| 10 | PA4 | bidirectional | 5V-tolerant (FTa) I/O with alternate functions such as USART2_CK, I2C1_SCL, SPI1_NSS, I2S1_WS, USART1_TX, LPTIM_OUT, SPI2_NSS and TIM4_CH3, and additional functions ADC_IN5 (fast channel), COMP1_INM and COMP2_INM. |
| 11 | PA5 | bidirectional | 5V-tolerant (FTa) I/O with alternate functions such as SPI1_SCK, I2C1_SDA, I2S1_CK, USART1_RX, LPTIM_IN1, TIM8_CH4 and TIM4_CH4, and additional functions ADC_IN6 (slow channel), COMP1_INM and COMP2_INM. |
| 12 | PA6 | bidirectional | 5V-tolerant (FTa) I/O with alternate functions such as SPI1_MISO, I2S1_MCK, TIM8_BKIN, TIM3_CH1, TIM1_BKIN, COMP2_OUT, BEEPER_OUT_P and USART2_TX, and additional functions ADC_IN7 (slow channel), COMP2_INM and COMP2_INP. |
| 13 | PA7 | bidirectional | 5V-tolerant (FTa) I/O with alternate functions such as SPI1_MOSI, I2S1_SD, TIM1_CH1N, TIM8_CH1N, TIM3_CH2, USART2_RX, BEEPER_OUT_N and TIM4_CH1, and additional functions ADC_IN8 (slow channel), COMP2_INP and COMP3_INM. |
| 14 | PB0 | bidirectional | 5V-tolerant (FTa) I/O with alternate functions TIM1_CH2N, TIM3_CH3, TIM8_CH2N and UART4_TX, and additional function ADC_IN9 (slow channel). |
| 15 | PB1 | bidirectional | 5V-tolerant (FTa) I/O with alternate functions such as TIM1_CH3N, TIM3_CH4, TIM8_CH3N, UART4_RX, SPI1_SCK, SPI2_MOSI, I2S2_SD and TIM4_CH2, and additional functions ADC_IN10 (slow channel) and COMP3_INP. |
| 16 | VSS | power_in | Ground pin; all VSS pins must be connected to the external supply ground. |
| 17 | VDD | power_in | Supply pin for the I/O pins and the internal regulator, 2.4 V to 3.6 V. |
| 18 | PA8 | bidirectional | General-purpose I/O pin whose alternate function list is not in the supplied pages. |
| 19 | PA9 | bidirectional | General-purpose I/O pin whose alternate function list is not in the supplied pages. |
| 20 | PA10 | bidirectional | General-purpose I/O pin whose alternate function list is not in the supplied pages. |
| 21 | PA11 | bidirectional | General-purpose I/O pin whose alternate function list is not in the supplied pages. |
| 22 | PA12 | bidirectional | General-purpose I/O pin whose alternate function list is not in the supplied pages. |
| 23 | PA13 | bidirectional | General-purpose I/O pin with debug function; if used as a non-debug input before STANDBY it needs an external pull-up/pull-down of 10 kΩ or less. |
| 24 | PA14 | bidirectional | General-purpose I/O pin with debug function; if used as a non-debug input before STANDBY it needs an external pull-up/pull-down of 10 kΩ or less. |
| 25 | PA15 | bidirectional | 5V-tolerant (FTa) I/O with alternate functions such as JTDI, USART2_CTS, I2C1_SCL, SPI2_NSS, I2S2_WS, TIM2_CH1 and SPI1_NSS, and additional function COMP2_INP. |
| 26 | PB3 | bidirectional | 5V-tolerant (FTa) I/O with alternate functions such as USART2_RTS, SPI1_SCK, I2S1_CK, TIM2_CH2, JTDO and TIM8_CH2N, and additional functions COMP1_INP, COMP2_INM and COMP3_INP. |
| 27 | PB4 | bidirectional | 5V-tolerant (FTa) I/O with alternate functions such as USART2_TX, SPI1_MISO, I2S1_MCK, TIM3_CH1, UART3_TX, TIM8_CH3, TIM1_BKIN and NJTRST, and additional functions COMP1_INP and COMP3_OUT. |
| 28 | PB5 | bidirectional | 5V-tolerant (FTa) I/O with alternate functions such as USART2_RX, I2C1_SMBA, SPI1_MOSI, I2S1_SD, TIM3_CH2, UART3_RX, LPTIM_IN1 and TIM8_CH4, and additional functions COMP1_INM and COMP3_INP. |
| 29 | PB6 | bidirectional | 5V-tolerant (FT) I/O with alternate functions such as USART1_TX, I2C1_SCL, SPI1_NSS, I2S1_WS, TIM1_CH2N, TIM4_CH1, SPI2_SCK, LPTIM_ETR, COMP1_OUT and BEEPER_OUT_P. |
| 30 | PB7 | bidirectional | 5V-tolerant (FTa) I/O with alternate functions such as USART1_RX, I2C1_SDA, TIM4_CH2, LPTIM_IN2, BEEPER_OUT_N, TIM8_ETR, TIM1_CH4N and SPI2_MISO, and additional function COMP2_INP. |
| 31 | PD0-BOOT0 | bidirectional | 5V-tolerant (FT) I/O that doubles as the BOOT0 boot-mode select input, which is pulled down after reset. |
| 32 | VSS | power_in | Ground pin; all VSS pins must be connected to the external supply ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nations Technologies Inc |
| Package | LQFP-32(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 32 |
CAD (KiCad official)
- Symbol:
N32G401K8L7 - Footprint:
Package_QFP:LQFP-32_7x7mm_P0.8mm - 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files:
n32g401k8l7-etched.step/n32g401k8l7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);n32g401k8l7.step/n32g401k8l7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nations Technologies Inc datasheet (85 pp, sha256
e42e7dc766743c16, retrieved 2026-11-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).