component
TMI8720PD
Public Made by Adomby adom
TMI Brushed DC Motor Drivers, DFN-10-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTMI8720PD
TMI · Brushed DC Motor Drivers · DFN-10-EP(3x3)
TMI8720PD from TMI, in a DFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GH2 | output | High-side gate drive output for the high-side FET gate; the datasheet gives the GH pin voltage range as -0.3 V to VM-7 V. |
| 2 | OUT2 | output | Phase node that connects to the high-side FET source and the low-side FET drain; continuous voltage is limited to -0.3 V to VM+0.3 V. |
| 3 | GL2 | output | Low-side gate drive output for the low-side FET gate; the GL pin voltage range is -0.3 V to 7 V. |
| 4 | IN2 | input | Logic input that controls the H-bridge outputs per Table 1, with an internal pulldown; recommended input voltage range is -0.3 V to 6 V. |
| 5 | IN1 | input | Logic input that controls the H-bridge outputs per Table 1, with an internal pulldown; recommended input voltage range is -0.3 V to 6 V. |
| 6 | GND | power_in | Logic ground; connect to board ground. |
| 7 | GL1 | output | Connects to the high-side FET source and the low-side FET drain of the first half-bridge; the datasheet lists the GL1 pin among the FET gate driver pins with a range of -0.3 V to 7 V. |
| 8 | OUT1 | output | Low-side gate pin for the low-side FET gate per the pin table; the phase node voltage is limited to -0.3 V to VM+0.3 V. |
| 9 | GH1 | output | High-side gate drive output for the high-side FET gate; the datasheet gives the GH pin voltage range as -0.3 V to VM-7 V. |
| 10 | VM | power_in | 5 V to 40 V power supply input; connect a 0.1 µF bypass capacitor to ground plus sufficient bulk capacitance rated for VM. |
| 11 | GND | power_in | Ground pin on the exposed pad, connected to board ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TMI |
| Package | DFN-10-EP(3x3) |
| Category | Motor Driver ICs |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
TMI8720PD - Footprint:
Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm - 3D model: DFN-10-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
tmi8720pd-etched.step/tmi8720pd-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmi8720pd.step/tmi8720pd.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TMI datasheet (10 pp, sha256
0e776027d04f030b, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).