component
MD58E36QC3
Public Made by Adomby adom
Shanghai Mingda Microelectronics Linear Voltage Regulators (LDO), SOT-23-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMD58E36QC3
Shanghai Mingda Microelectronics · Linear Voltage Regulators (LDO) · SOT-23-5L
MD58E36QC3 from Shanghai Mingda Microelectronics, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin accepting 2.2 V to 5.5 V (absolute maximum 6.0 V), requiring a 1 µF or larger ceramic input capacitor. |
| 2 | GND | power_in | Ground pin of the regulator. |
| 3 | EN | input | Enable input with an internal 1 MΩ pulldown to GND; above 1.1 V (VENH) enables the device, below 0.35 V (VENL) disables it and activates the 240 Ω output auto-discharge. |
| 4 | NC | unconnected | No internal connection. |
| 5 | VOUT | power_out | Regulated 3.6 V output (MD5836) supplying up to 500 mA, requiring at least a 1 µF ceramic output capacitor that may be placed up to 10 cm away. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-23-5L |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Tolerance | VOUT(S) | -2 | 2 | % | VIN=VOUT(S)+1.0V, IOUT=1mA, VOUT(S)≥2.0V | 1 | |
| Input Voltage | VIN | 2.2 | 5.5 | V | 4 | ||
| Line Regulation | 0.02 | 0.1 | %/V | VOUT(S)+1.0V≤VIN=VEN≤5.5V, IOUT=10mA | 4 | ||
| Load Regulation | VOUT2 | 20 | 40 | mV | VIN=VEN=VOUT(S)+1.0V, 1mA≤IOUT≤500mA | 4 | |
| Temperature Stability | -60 | 60 | ppm/℃ | VIN=VEN=VOUT(S)+1.0V, IOUT=1mA, -40℃≤Ta≤125℃ | 4 | ||
| GND Current no load | IGND | 20 | 40 | µA | VEN=VIN, no load | 4 | |
| Shutdown Current | ISHUT | 0.01 | 0.1 | µA | VIN=5.5V, VEN=0 | 4 | |
| Maximum Output Current | IOUTMAX | 450 | 500 | mA | 4 | ||
| Start-Up Time | TSTART | 80 | 150 | µs | From VEN>VENH to VOUT=95% of VOUT | 4 | |
| EN High Level Voltage | VENH | 1.1 | 5.5 | V | 4 | ||
| EN Low Level Voltage | VENL | 0 | 0.35 | V | 4 | ||
| EN High Level Current | IENH | -0.1 | 0.1 | µA | VIN=5.5V, VEN=VIN | 4 | |
| EN Low Level Current | IENL | -0.1 | 0.1 | µA | VIN=5.5V, VEN=0 | 4 | |
| Input Voltage | VIN | -0.3 | 6 | V | Ta=25℃ | 3 | |
| Output Voltage | VOUT | -0.3 | V | -0.3 ~ VIN+0.3V | 3 | ||
| Power Dissipation | PD | 250 | mW | SOT23-5L | 3 | ||
| Operating Ambient Temperature | Topr | -40 | 85 | ℃ | 3 | ||
| Storage Temperature | Tstg | -40 | 125 | ℃ | 3 | ||
| ESD Protection | ESD | 6000 | V | HBM | 3 | ||
| Operating Junction Temperature | TJ | -40 | 125 | ℃ | 1 | ||
| Thermal Resistance | RθJA | 180 | ℃/W | SOT23-5L | 3 | ||
| Dropout Voltage | VDROP | 220 | mV | VEN=VIN, VOUT≥3V, IOUT=500mA | 4 | ||
| GND Current at 500mA | IGND | 680 | µA | VEN=VIN, IOUT=500mA | 4 | ||
| Current Limit | ILIM | 750 | mA | VIN=VEN=VOUT(S)+1.0V, VOUT = 0.95 ×VOUT(S) | 4 | ||
| COUT Auto Discharge Resistance | RDCHG | 240 | Ω | VEN=0, VOUT=VOUT(S) | 4 | ||
| PSRR | PSRR | 91 | dB | f=1kHz, IOUT=20mA | 4 | ||
| Output noise voltage | eN | 10 | µVRMS | IOUT=20mA | 4 | ||
| Over Temperature Protection | OTP | 155 | ℃ | IOUT=1mA | 4 |
CAD (KiCad official)
- Symbol:
MD58E36QC3 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
md58e36qc3-etched.step/md58e36qc3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);md58e36qc3.step/md58e36qc3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Mingda Microelectronics datasheet (13 pp, sha256
bb956f4399e0ae25, retrieved 2026-10-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).