Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LMH6655MMX

Texas Instruments · Operational Amplifier · VSSOP-8 (DGK)

LMH6655MMX from Texas Instruments, in a VSSOP-8 (DGK). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 OUT A output Channel A output with maximum swing −3.6V to +3.4V (RL=100Ω) and slew rate 200V/µs.
2 -IN A input Channel A inverting input, differential range ±1.2V, common-mode range −5.15V to +3.7V.
3 +IN A input Channel A non-inverting input, differential range ±1.2V, common-mode range −5.15V to +3.7V.
4 V- power_in Negative supply voltage, operating range ±2.5V to ±6V with maximum differential 13.2V to V+.
5 +IN B input Channel B non-inverting input, differential range ±1.2V, common-mode range −5.15V to +3.7V.
6 -IN B input Channel B inverting input, differential range ±1.2V, common-mode range −5.15V to +3.7V.
7 OUT B output Channel B output with maximum swing −3.6V to +3.4V (RL=100Ω) and slew rate 200V/µs.
8 V+ power_in Positive supply voltage, operating range ±2.5V to ±6V with maximum differential 13.2V from V-.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8 (DGK)
Category Amplifiers/Comparators
Pins 8

CAD (Adom-generated)

  • Symbol: LMH6655MMX
  • Footprint: Adom_Gen:Texas_Instruments_DGK0008A
  • 3D model: generated to fit the land (STEP)
  • 3D model files: lmh6655mmx-etched.step / lmh6655mmx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmh6655mmx.step / lmh6655mmx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (36 pp, sha256 5a83e9ac8717748a, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: TI DGK0008A EXAMPLE BOARD LAYOUT (4214862/A), SNOS956E p.31, LAND PATTERN EXAMPLE: 8X pads 1.4 x 0.45 mm, (R0.05) TYP corners, 6X pitch 0.65 mm, pad row centre-to-centre (4.4) mm, so pads at x = +/-2.2, y = +/-0.325, +/-0.975. Body from PACKAGE OUTLINE p.30: 3.0 x 3.0 (2.9-3.1) mm, 1.1 mm max height, lead span 4.75-5.05. Task master ruling 2026-11-21: the maker's printed land wins over VSSOP-8_2.3x2mm_P0.5mm (a 0.5-pitch land) and KiCad's VSSOP-8_3x3mm_P0.65mm (1.625 x 0.5 at +/-2.1125).

Datasheet PDF