3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTPS72201DBVR
Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5
TPS72201DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply voltage with an operating range of 1.8 V to 5.5 V and an absolute maximum input range of -0.3 V to 7 V. |
| 2 | GND | power_in | Ground terminal, which carries the quiescent (ground pin) current of typically 85 µA during normal operation. |
| 3 | EN | input | Enable input: a logic high (VIH min 1.4 V) enables the output and a logic low (VIL max 0.4 V) shuts it off, with an absolute maximum of 7 V. |
| 4 | NC/FB | input | On the TPS72201 adjustable version this is the feedback input (FB), which sets the output through an external divider referenced to Vref = 1.225 V typ; on the fixed-output versions it is not connected and must be left floating, not tied to GND. |
| 5 | OUT | power_out | Regulated output voltage, which requires a 0.1 µF ceramic bypass capacitor for stability and supplies up to 50 mA continuous output current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VI | 1.8 | 5.5 | V | 3 | ||
| Continuous output current | IO | 0 | 50 | mA | 3 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 3 | ||
| Output voltage accuracy (printed as multiple of VO, adjustable version) | VO | 0.97 | 1.03 | VO | 0 µA < IO < 50 mA, 1.2 V ≤ VO ≤ 2.5 V | 3 | |
| Current limit | 175 | 525 | mA | See Note 2 | 3 | ||
| Output voltage line regulation (ΔVO/VO) | ΔVO/VO | 0.1 | %/V | VO + 1 V < VI ≤ 5.5 V | 3 | ||
| Output voltage line regulation (ΔVO/VO), TJ = 25°C | ΔVO/VO | 0.03 | 0.09 | %/V | TJ = 25°C | 3 | |
| EN high level input voltage | VIH | 1.4 | V | 3 | |||
| EN low level input voltage | VIL | -0.2 | 0.4 | V | 3 | ||
| Dropout voltage (TPS72201) | VDO | 100 | mV | IO = 50 mA, 1.2 V ≤ VO ≤ 5.2 V | 3 | ||
| Feedback input current (TPS72201) | 1 | µA | 3 | ||||
| Quiescent current (GND terminal current), IO = 0 | IQ | 85 | 120 | µA | TJ = 25°C | 3 | |
| Quiescent current (GND terminal current), IO = 50 mA, TJ = 25°C | IQ | 275 | µA | IO = 50 mA, TJ = 25°C | 3 | ||
| Quiescent current (GND terminal current), IO = 50 mA | IQ | 550 | µA | IO = 50 mA | 3 | ||
| Standby current, TJ = 25°C | 0.01 | µA | EN < 0.5 V, TJ = 25°C | 3 | |||
| Standby current | 1 | µA | EN < 0.5 V | 3 | |||
| Reference voltage | Vref | 1.225 | V | TJ = 25°C | 3 | ||
| Thermal shutdown temperature | 170 | °C | 3 | ||||
| Thermal shutdown hysteresis | 20 | °C | 3 | ||||
| Input voltage range | -0.3 | 7 | V | 2 | |||
| Voltage at EN | -0.3 | 7 | V | 2 | |||
| Voltage on OUT, FB, NC | -0.3 | V | Printed maximum is VI + 0.3 V | 2 | |||
| Operating virtual junction temperature range | TJ | -40 | 150 | °C | 2 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| Thermal resistance junction-to-ambient, Low K board | RθJA | 259 | °C/W | Low K (1s) JEDEC board | 2 | ||
| Thermal resistance junction-to-ambient, High K board | RθJA | 180 | °C/W | High K (2s2p) JEDEC board | 2 | ||
| Thermal resistance junction-to-case (bottom) | RθJC | 65.8 | °C/W | 2 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TPS72201DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tps72201dbvr-etched.step/tps72201dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps72201dbvr.step/tps72201dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (17 pp, sha256
906c116f714def9a, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).