component
TLE2022AMDR
Public Made by Adomby adom
Texas Instruments Pre-ordered Chips, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLE2022AMDR
Texas Instruments · Pre-ordered Chips · SOIC-8
TLE2022AMDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of channel A; absolute maximum output current is ±30 mA per output for the TLE2022, and the output must not be shorted to VCC+. |
| 2 | -IN A | input | Inverting input of channel A; the differential input voltage should stay within about ±600 mV unless limiting resistance is used. |
| 3 | +IN A | input | Noninverting input of channel A; for the M-suffix device the common-mode input range is 0 V to 3.2 V on a 5 V supply and -15 V to 13.2 V on ±15 V. |
| 4 | VCC- | power_in | Negative supply (lowest potential); recommended supply is ±2 V to ±20 V for dual supply or 4 V to 40 V for single supply. |
| 5 | +IN B | input | Noninverting input of channel B; for the M-suffix device the common-mode input range is 0 V to 3.2 V on a 5 V supply and -15 V to 13.2 V on ±15 V. |
| 6 | -IN B | input | Inverting input of channel B; the differential input voltage should stay within about ±600 mV unless limiting resistance is used. |
| 7 | OUT B | output | Output of channel B; absolute maximum output current is ±30 mA per output for the TLE2022, and the output must not be shorted to VCC+. |
| 8 | VCC+ | power_in | Positive supply (highest potential); recommended supply is ±2 V to ±20 V for dual supply or 4 V to 40 V for single supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Interface ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (±15V, TA=25°C) | VIO | -300 | 120 | 300 | µV | VCC±=±15V; RS=50Ω; TA=25°C | 14 |
| Input offset voltage (±15V, full temperature range) | VIO | -450 | 450 | µV | VCC±=±15V; RS=50Ω; TA=-55°C to +125°C | 14 | |
| Input offset voltage drift (±15V) | dVIO/dT | -2 | 2 | 2 | µV/°C | VCC±=±15V; RS=50Ω; TA=-55°C to +125°C | 14 |
| Input bias current (±15V, 25°C) | IIB | 33 | 70 | nA | VCC±=±15V; RS=50Ω | 14 | |
| Input bias current (±15V, full temperature range) | IIB | 90 | nA | VCC±=±15V; RS=50Ω; TA=-55°C to +125°C | 14 | ||
| Input offset current (±15V, 25°C) | IIO | 0.4 | 6 | nA | VCC±=±15V; RS=50Ω | 14 | |
| Input offset current (±15V, full temperature range) | IIO | 10 | nA | VCC±=±15V; RS=50Ω; TA=-55°C to +125°C | 14 | ||
| Power-supply rejection ratio (±15V, 25°C) | PSRR | 103 | 118 | dB | VCC±=±2.5V to ±15V | 15 | |
| Power-supply rejection ratio (±15V, full temperature range) | PSRR | 98 | dB | VCC±=±2.5V to ±15V; TA=-55°C to +125°C | 15 | ||
| Large-signal voltage gain (±15V, 25°C) | AV | 1 | 7 | V/µV | VCC±=±15V; RL=10kΩ, VO=±10V | 15 | |
| Large-signal voltage gain (±15V, full temperature range) | AV | 1 | V/µV | VCC±=±15V; RL=10kΩ, VO=±10V; TA=-55°C to +125°C | 15 | ||
| Common-mode voltage, to positive rail (±15V, 25°C) | VIC | 13.5 | 14 | V | VCC±=±15V; To positive rail, RS=50Ω | 15 | |
| Common-mode voltage, to positive rail (±15V, full temperature range) | VIC | 13.2 | V | VCC±=±15V; To positive rail, RS=50Ω; TA=-55°C to +125°C | 15 | ||
| Common-mode voltage, to negative rail (±15V, 25°C) | VIC | -15 | -15.3 | V | VCC±=±15V; To negative rail, RS=50Ω | 15 | |
| Common-mode voltage, to negative rail (±15V, full temperature range) | VIC | -15 | V | VCC±=±15V; To negative rail, RS=50Ω; TA=-55°C to +125°C | 15 | ||
| Common-mode rejection ratio (±15V, 25°C) | CMRR | 97 | 109 | dB | VCC±=±15V; VIC=VICRmin, RS=50Ω | 16 | |
| Common-mode rejection ratio (±15V, full temperature range) | CMRR | 93 | dB | VCC±=±15V; VIC=VICRmin, RS=50Ω; TA=-55°C to +125°C | 16 | ||
| Output voltage swing, positive (±15V, 25°C) | VO | 14 | 14.3 | V | VCC±=±15V; RL=10kΩ; Positive | 16 | |
| Output voltage swing, positive (±15V, full temperature range) | VO | 13.9 | V | VCC±=±15V; RL=10kΩ; Positive; TA=-55°C to +125°C | 16 | ||
| Output voltage swing, negative (±15V, 25°C) | VO | -14.1 | -13.7 | V | VCC±=±15V; RL=10kΩ; Negative | 16 | |
| Output voltage swing, negative (±15V, full temperature range) | VO | -13.6 | V | VCC±=±15V; RL=10kΩ; Negative; TA=-55°C to +125°C | 16 | ||
| Supply current (±15V, no load, 25°C) | ICC | 550 | 700 | µA | VCC±=±15V; No load | 16 | |
| Supply current (±15V, no load, full temperature range) | ICC | 700 | µA | VCC±=±15V; No load; TA=-55°C to +125°C | 16 | ||
| Input offset voltage (5V, 25°C) | VIO | -400 | 400 | µV | VCC=5V; RS=50Ω | 18 | |
| Input offset voltage (5V, full temperature range) | VIO | -550 | 550 | µV | VCC=5V; RS=50Ω; TA=-55°C to +125°C | 18 | |
| Input bias current (5V, 25°C) | IIB | 33 | 70 | nA | VCC=5V; RS=50Ω | 18 | |
| Input bias current (5V, full temperature range) | IIB | 90 | nA | VCC=5V; RS=50Ω; TA=-55°C to +125°C | 18 | ||
| Input offset current (5V, 25°C) | IIO | 0.4 | 6 | nA | VCC=5V; RS=50Ω | 18 | |
| Input offset current (5V, full temperature range) | IIO | 10 | nA | VCC=5V; RS=50Ω; TA=-55°C to +125°C | 18 | ||
| Power-supply rejection ratio (5V, 25°C) | PSRR | 103 | 118 | dB | VCC=5V to 30V | 19 | |
| Power-supply rejection ratio (5V, full temperature range) | PSRR | 98 | dB | VCC=5V to 30V; TA=-55°C to +125°C | 19 | ||
| Large-signal voltage gain (5V, 25°C) | AV | 0.4 | 1.5 | V/µV | VCC=5V; RL=10kΩ, 1.4V≤VO≤4V | 19 | |
| Large-signal voltage gain (5V, full temperature range) | AV | 0.1 | V/µV | VCC=5V; RL=10kΩ, 1.4V≤VO≤4V; TA=-55°C to +125°C | 19 | ||
| Common-mode input voltage range, to positive rail (5V, 25°C) | VICR | 3.5 | 4 | V | VCC=5V; To positive rail, RS=50Ω | 19 | |
| Common-mode input voltage range, to positive rail (5V, full temperature range) | VICR | 3.2 | V | VCC=5V; To positive rail, RS=50Ω; TA=-55°C to +125°C | 19 | ||
| Common-mode input voltage range, to negative rail (5V, 25°C) | VICR | 0 | -0.3 | V | VCC=5V; To negative rail, RS=50Ω | 19 | |
| Common-mode input voltage range, to negative rail (5V, full temperature range) | VICR | 0 | V | VCC=5V; To negative rail, RS=50Ω; TA=-55°C to +125°C | 19 | ||
| Common-mode rejection ratio (5V, 25°C) | CMRR | 87 | 102 | dB | VCC=5V; VIC=VICRmin, RS=50Ω | 19 | |
| Common-mode rejection ratio (5V, full temperature range) | CMRR | 82 | dB | VCC=5V; VIC=VICRmin, RS=50Ω; TA=-55°C to +125°C | 19 | ||
| Output voltage swing, positive (5V, 25°C) | VO | 4 | 4.3 | V | VCC=5V; RL=10kΩ; Positive | 20 | |
| Output voltage swing, positive (5V, full temperature range) | VO | 3.8 | V | VCC=5V; RL=10kΩ; Positive; TA=-55°C to +125°C | 20 | ||
| Output voltage swing, negative (5V, 25°C) | VO | 0.7 | 0.8 | V | VCC=5V; RL=10kΩ; Negative | 20 | |
| Output voltage swing, negative (5V, full temperature range) | VO | 0.95 | V | VCC=5V; RL=10kΩ; Negative; TA=-55°C to +125°C | 20 | ||
| Supply current (5V, 25°C) | ICC | 450 | 600 | µA | 20 | ||
| Supply current (5V, full temperature range) | ICC | 600 | µA | TA=-55°C to +125°C | 20 | ||
| Supply voltage, dual supply (recommended) | VCC | 2 | 20 | V | Dual supply, VCC=(VCC+)-(VCC-) | 6 | |
| Supply voltage, single supply (recommended) | VCC | 4 | 40 | V | Single supply | 6 | |
| Common-mode input voltage, VCC=5V, M suffix (recommended) | VIC | 0 | 3.2 | V | VCC=5V, I and M suffix | 6 | |
| Common-mode input voltage, VCC±=±15V, M suffix (recommended) | VIC | -15 | 13.2 | V | VCC±=±15V, I and M suffix | 6 | |
| Operating free-air temperature, M suffix (recommended) | TA | -55 | 125 | °C | M suffix | 6 | |
| Supply voltage, positive (absolute maximum) | VCC+ | 20 | V | 6 | |||
| Supply voltage, negative (absolute maximum) | VCC- | -20 | V | 6 | |||
| Differential input voltage (absolute maximum) | VID | -0.6 | 0.6 | V | 6 | ||
| Input current, each input (absolute maximum) | II | -1 | 1 | mA | Each input | 6 | |
| Output current, each output, TLE2022 (absolute maximum) | IO | -30 | 30 | mA | Each output, TLE2022 | 6 | |
| Operating free-air temperature, M suffix (absolute maximum) | TA | -55 | 150 | °C | M suffix | 6 | |
| Storage temperature (absolute maximum) | Tstg | -65 | 150 | °C | 6 | ||
| Junction-to-ambient thermal resistance, TLE2022 D (SOIC) 8-pin | RθJA | 122.4 | ℃/W | TLE2022 D (SOIC), 8 pins | 7 | ||
| Junction-to-case (top) thermal resistance, TLE2022 D (SOIC) 8-pin | RθJC(top) | 61.5 | ℃/W | TLE2022 D (SOIC), 8 pins | 7 | ||
| Junction-to-board thermal resistance, TLE2022 D (SOIC) 8-pin | RθJB | 70 | ℃/W | TLE2022 D (SOIC), 8 pins | 7 |
CAD (KiCad official)
- Symbol:
TLE2022AMDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tle2022amdr-etched.step/tle2022amdr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tle2022amdr.step/tle2022amdr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (57 pp, sha256
8e287cc732a67667, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).