component
TC2466H
Public Made by Adomby adom
Shenzhen Fuman Brushed DC Motor Drivers, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTC2466H
Shenzhen Fuman · Brushed DC Motor Drivers · SOP-8
TC2466H from Shenzhen Fuman, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VM | power_in | Motor power supply input, recommended 2.0 to 9.6 V with an absolute maximum of 11 V, and needs a local decoupling capacitor placed close to the pin. |
| 2 | OUTA | output | H-bridge output A for forward logic; continuous output current is 1.8 A on the SOP-8 version (peak 3.5 A, and the datasheet gives -2100 to 2100 mA as the output current range). |
| 3 | OUTB | output | H-bridge output B for reverse logic; continuous output current is 1.8 A on the SOP-8 version (peak 3.5 A, and the datasheet gives -2100 to 2100 mA as the output current range). |
| 4 | GND | power_in | Ground, which is the negative terminal of the power supply. |
| 5 | INB | input | Logic control input B; high-level input must be at least 2.0 V, low-level input at most 0.8 V, with a 0 to 5 V input range and an internal 12 kΩ pull-down. |
| 6 | INA | input | Logic control input A; high-level input must be at least 2.0 V, low-level input at most 0.8 V, with a 0 to 5 V input range and an internal 12 kΩ pull-down. |
| 7 | NC | unconnected | No connection; the datasheet specifies this pin to be left floating. |
| 8 | VCC | power_in | Logic supply input, recommended 2 to 5 V with an absolute maximum of 6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shenzhen Fuman |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 功率电源电压 (VM) recommended operating | VM | 2 | 9.6 | V | 3 | ||
| 逻辑电源电压 (VCC) recommended operating | VCC | 2 | 5 | V | 3 | ||
| 控制输入电压 (VIN) recommended operating | VIN | 0 | 5 | V | 3 | ||
| 正、反转输出电流 recommended operating | Iout | -2100 | 2100 | mA | 3 | ||
| 逻辑电源电压 VCC absolute maximum | VCC | 6 | V | 2 | |||
| 功率电源电压 VM absolute maximum | VM | 11 | V | 2 | |||
| 工作温度 Topr | Topr | -20 | 85 | ℃ | 2 | ||
| 结温 Tj | Tj | 150 | ℃ | 2 | |||
| 存储温度 Tstg | Tstg | -55 | 150 | ℃ | 2 | ||
| 手工焊接温度 | 350 | 370 | ℃ | 2 | |||
| 输出电流峰值 Iop | Iop | 3.5 | A | 2 | |||
| 最大连续输出电流 Ioc | Ioc | 2.1 | A | 2 | |||
| 最大 PWM 频率 fPWM | fPWM | 35 | KHz | 2 | |||
| 电路关断电流 (VCC) | ICCST | 0 | 5 | uA | INA=INB=0 | 3 | |
| 电路关断电流 (VDD) | IDDST | 0 | 5 | uA | 3 | ||
| 高电平输入电压 | VINH | 2 | V | 3 | |||
| 低电平输入电压 | VINL | 0.8 | V | 3 | |||
| 高电平输入电流 | IINH | 250 | 400 | uA | VIN=3V | 3 | |
| 低电平输入电流 | IINL | -1 | 0 | uA | VIN=0V | 3 | |
| 输出导通阻抗 RON | RON | 0.26 | 0.6 | Ω | Io=±200mA | 3 |
CAD (KiCad official)
- Symbol:
TC2466H - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
tc2466h-etched.step/tc2466h-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tc2466h.step/tc2466h.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shenzhen Fuman datasheet (6 pp, sha256
6fc999f833aeb6da, retrieved 2026-10-19, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).