3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTLV70018DDCR-HXY
HXY MOSFET · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L
TLV70018DDCR-HXY from HXY MOSFET, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin; the absolute maximum supply voltage is -0.3 to +8 V, the input voltage is rated up to 6.5 V, and a 10uF input capacitor should be connected between VIN and VSS. |
| 2 | GND | power_in | Ground reference (VSS) pin; wiring resistance between VIN and VSS should be kept low, and the output and input capacitors should be placed as close to the IC as possible. |
| 3 | CE | input | ON/OFF control input with CMOS hysteresis; logic high requires at least 1.5 V and logic low is 0.4 V max at VIN=5.0 V, and any series resistor on this pin must be under 10 kΩ. |
| 4 | NC | unconnected | No-connect pin, not internally connected to the regulator circuitry. |
| 5 | VOUT | power_out | Regulated output pin supplying up to 300 mA; an output capacitor of at least 10uF should be connected as close as possible to VOUT and VSS for phase compensation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOT-23-5L |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (Vout≤2.5V row, 1.8V variant) | -0.05 | 0.05 | V | Vin=Vout+1V 1.0mA≤Iout≤100mA | 3 | ||
| Line Regulation | △Vout1/(△Vin·Vout) | 0.05 | 0.2 | %/V | 4.3V≤Vin≤8V Iout=10mA | 3 | |
| Load Regulation | △Vout | 15 | 40 | mV | Vin= 4.3V 1.0mA≤Iout≤100mA | 3 | |
| Supply Current | Iss | 10 | 15 | uA | 3 | ||
| EN logic high voltage | VENH | 1.5 | V | VIN=5.0V | 3 | ||
| EN logic low voltage | VENL | 0.4 | V | VIN=5.0V | 3 | ||
| Input Voltage | Vin | 6.5 | V | 3 | |||
| Output Voltage Temperature Coefficient | △Vout/(Ta·Vout) | -100 | 100 | ppm/℃ | Iout=30mA 0℃≤Ta≤70℃ | 3 | |
| Supply Voltage (absolute maximum) | VIN | -0.3 | 8 | V | 2 | ||
| Storage Temperature Range | STG | -50 | 125 | °C | 2 | ||
| Operating Temperature Range | TA | -40 | 85 | °C | 2 | ||
| Output Current | Iout | 300 | mA | Vin-Vout=1V | 3 | ||
| Dropout Voltage | VDROP | 0.11 | V | Iout=100mA | 3 | ||
| PSRR at 100Hz | PSRR | 75 | dB | F=100Hz, Vin=(VOUT+1)dc+1Vpp | 3 | ||
| PSRR at 1000Hz | PSRR | 65 | dB | F=1000Hz, Vin=(VOUT+1)dc+1Vpp | 3 | ||
| Thermal resistance, junction-to-ambient (SOT-23-5L) | θJA | 260 | °C/W | SOT-23-5L | 2 | ||
| Power dissipation (SOT-23-5L) | PW | 0.4 | W | SOT-23-5L | 2 | ||
| Output capacitor CL | CL | 10 | uF | Connected as close as possible to VOUT and VSS pins | 4 | ||
| Input capacitor CIN | CIN | 10 | uF | Connected between VIN and VSS pins | 4 | ||
| CE pin series resistor | 10 | K | Resistor added before CE pin | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TLV70018DDCR-HXY - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L, generated on the KiCad land (body 1.625 x 2.935 mm, terminals on the pads, 1.25 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tlv70018ddcr-hxy-etched.step/tlv70018ddcr-hxy-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv70018ddcr-hxy.step/tlv70018ddcr-hxy.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (6 pp, sha256
163838e5d5ef8620, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).