component
SMBJ170CA
Public Made by Adomby adom
GOODWORK TVS, DO-214AA(SMB). Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSMBJ170CA
GOODWORK · TVS · DO-214AA(SMB)
SMBJ170CA from GOODWORK, in a DO-214AA(SMB). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised fuse; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised fuse; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GOODWORK |
| Package | DO-214AA(SMB) |
| Category | TVS/Fuse/Board Level Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Breakdown voltage VBR | VBR | 189 | 217.5 | V | @ IT = 1 mA (test current, mA) | 4 | |
| Maximum reverse leakage current | IR | 5 | uA | @ VRWM = 170 V | 4 | ||
| Maximum clamping voltage | VC | 275 | V | @ Ipp = 2.2 A | 4 | ||
| Peak pulse power dissipation | PPPM | 600 | Watts | TA=25 C, TP=1ms (NOTE 1) | 1 | ||
| Reverse stand-off voltage | VRWM | 170 | V | 4 | |||
| Peak forward surge current | IFSM | 100 | Amps | 8.3ms single half sine-wave superimposed on rated load (JEDEC method) | 1 | ||
| Operating and storage temperature range | TJ, TSTG | -55 | 150 | C | 1 | ||
| Typical thermal resistance, junction to case | RθJ-C | 20 | C/W | Between junction and case | 1 | ||
| Typical thermal resistance, junction to ambient | RθJ-A | 95 | C/W | Between junction and air | 1 | ||
| High temperature soldering at terminals | 260 | C | 10 seconds at terminals | 1 | |||
| Peak reflow temperature | Tp | 260 | C | Pb-free reflow; do not exceed +260 C | 6 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper | 2. Mounted on Copper Pad area of 5.0mm (.013mm Thick) to each terminal. | 1 |
CAD (KiCad official)
- Symbol:
SMBJ170CA - Footprint:
Diode_SMD:D_SMB - 3D model: DO-214AA(SMB) (KiCad packages3D, STEP)
- 3D model files:
smbj170ca-etched.step/smbj170ca-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);smbj170ca.step/smbj170ca.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GOODWORK datasheet (7 pp, sha256
30a80bd88d27f7ca, retrieved 2026-10-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).