Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HSN65HVD12DR

HXY MOSFET · RS-485 / RS-422 ICs · SOP-8

HSN65HVD12DR from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: driven high when VA exceeds VB by more than 200 mV and driven low when VA is below VB by more than 200 mV.
2 RE input Receiver output enable, active low: when RE is high the receiver output RO is placed in high-impedance state.
3 DE input Driver output enable, active high: when DE is low the driver outputs A and B are high-impedance, and DE high puts the device in transmit mode (with RE low, DE low selects receive mode).
4 DI input Driver input: DI low drives A high and B low, and DI high gives the opposite output states.
5 GND power_in Ground, the negative power supply terminal.
6 A bidirectional Receiver non-inverting input and driver non-inverting output; the receiver common-mode input range is stated as -7 V to +12 V.
7 B bidirectional Receiver inverting input and driver inverting output; the receiver common-mode input range is stated as -7 V to +12 V.
8 VCC power_in Positive power supply terminal, operated from a single 5 V supply per the datasheet.

Key specifications

Parameter Value
Manufacturer HXY MOSFET
Package SOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Differential output voltage, RL=27Ω VOD2 1.5 V Fig.1, RL=27Ω 2
Differential output voltage change in magnitude VOD 0.2 V Fig.1, RL=27Ω 2
Common-mode output voltage VOC 3 V Fig.1, RL=27Ω 2
Common-mode output voltage change amplitude VOC 0.2 V Fig.1, RL=27Ω 2
Input signal high level VIH 2 V DE, DI, REB 2
Input signal low level VIL 0.8 V DE, DI, REB 2
Control pin input current IIN1 -2 2 μA DE, DI, REB 2
A/B pin input current IIN2 1 mA DE=0, Vcc=0V or 5.25V; VIN=12V 2
A/B pin input current IIN2 -0.8 mA DE=0, Vcc=0V or 5.25V; VIN=-7V 2
Output short-circuit current IOSD -250 250 mA -7V VOUT 12V 2
Receiver differential threshold voltage VTH -200 200 mV 2
Receiver input hysteresis VTH 30 mV 2
Receiver output low voltage VOL 0.4 V Io= 4mA, VID= -200mV 2
Receiver tri-state output current IOZR 1 μA 0.4V VCM 2.4V 2
Receiver input resistance RIN 32 kΩ -7V VCM +12V 2
Receiver short-circuit current IOSR 7 95 mA Fig. 6, 0V VRO Vcc 2
Supply current (DE=Vcc) Icc 155 900 μA 无负载, /RE= GND, DI= Vcc or GND. DE= Vcc 2
Supply current (DE=GND) Icc 160 600 μA 无负载, /RE= GND, DI= Vcc or GND. DE= GND 2
Supply voltage -0.3 8 V 3
Control input voltage (/RE, DE) -0.3 V 3
Receiver output voltage (RO) -0.3 V 3
Driver input voltage (DI) -0.3 V 3
Receiver input signal voltage (A, B) 13 V 3
Driver output voltage (A, B) 13 V 3
Operating temperature TOP 0 85 °C 3
Storage temperature TSTO -65 150 °C 3
Receiver input to output propagation delay 20 60 200 ns RDIFF=50Ω, CL1=CL2=100pF 3
Driver output skew to output 30 ns 3
Differential receiver propagation delay skew /tPLH- tPHL/ 20 ns 3
Maximum data rate MAX 2.5 Mbps 3

CAD (KiCad official)

  • Symbol: HSN65HVD12DR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: hsn65hvd12dr-etched.step / hsn65hvd12dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hsn65hvd12dr.step / hsn65hvd12dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HXY MOSFET datasheet (8 pp, sha256 24abfe59415cd464, retrieved 2026-10-18, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF