3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA830IDBVR
Texas Instruments · Operational Amplifier · SOT-23-5
OPA830IDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Output providing output swing within 25mV of either power rail when driving 150Ω load with ±80mA output current capability. |
| 2 | V- | power_in | Negative (lowest) power supply voltage rail; absolute maximum voltage ±6.5V for DBV package. |
| 3 | +IN | input | Non-inverting input with input voltage range VS- - 0.5V to VS+ + 0.3V and typical input bias current 5μA. |
| 4 | -IN | input | Inverting input with input voltage range VS- - 0.5V to VS+ + 0.3V; maximum differential input voltage ±2.5V; typical input bias current 5μA. |
| 5 | V+ | power_in | Positive (highest) power supply voltage rail; absolute maximum voltage ±6.5V for DBV package; recommended supply voltage 3V to 11V for single supply or ±1.4V to ±5.5V for dual supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Rise time (10%-90%) | 3.3 | 5.7 | ns | 0.5V 阶跃,10% 至 90% | 17 | ||
| Fall time (10%-90%) | 3.3 | 5.7 | ns | 0.5V 阶跃,10% 至 90% | 17 | ||
| Settling time to 0.1% | 43 | 64 | ns | G = +2,1V 阶跃,至 0.1% | 17 | ||
| Input voltage noise | 5.8 | 10.2 | nV/√Hz | f > 1MHz | 17 | ||
| Input voltage noise (temperature) | 11.2 | nV/√Hz | f > 1MHz,TA = –40°C 至 +85°C | 17 | |||
| Input current noise | 4 | 5.4 | pA/√Hz | f > 1MHz | 17 | ||
| Input current noise (temperature) | 6.4 | pA/√Hz | f > 1MHz,TA = –40°C 至 +85°C | 17 | |||
| Open-loop voltage gain | 66 | 72 | dB | VO = ±1V | 17 | ||
| Open-loop voltage gain (temperature) | 64 | dB | VO = ±1V,TA = –40°C 至 +85°C | 17 | |||
| Input offset voltage | -5 | 0.5 | 5 | mV | 17 | ||
| Input offset voltage (temperature) | -6.5 | 6.5 | mV | TA = -40°C 至 +85°C | 17 | ||
| Average offset voltage drift | -20 | 20 | μV/°C | TA = -40°C 至 +85°C | 17 | ||
| Input bias current | 15 | 18 | μA | VCM = 0V | 17 | ||
| Input bias current (temperature) | 19 | μA | VCM = 0V,TA = –40°C 至 +85°C | 17 | |||
| Input bias current drift | -12 | 12 | nA/°C | VCM = 0V,TA = –40°C 至 +85°C | 17 | ||
| Input offset current | -0.8 | 0.1 | 0.8 | μA | VCM = 0V | 17 | |
| Input offset current (temperature) | -1.2 | 1.2 | μA | VCM = 0V,TA = –40°C 至 +85°C | 17 | ||
| Input offset current drift | -5 | 5 | nA/°C | VCM = 0V,TA = –40°C 至 +85°C | 17 | ||
| Negative input voltage range | -0.5 | -0.4 | V | 17 | |||
| Negative input voltage range (temperature) | -0.2 | V | TA = –40°C 至 +85°C | 17 | |||
| Positive input voltage range | 3.1 | 3.2 | V | 17 | |||
| Positive input voltage range (temperature) | 2.9 | V | TA = –40°C 至 +85°C | 17 | |||
| Common-mode rejection ratio | CMRR | 76 | 80 | dB | 以输入为基准 | 17 | |
| Common-mode rejection ratio (temperature) | CMRR | 72 | dB | 以输入为基准,TA = –40°C 至 +85°C | 17 | ||
| Output voltage swing low (RL = 1kΩ) | 0.09 | 0.11 | V | G = +5,RL = 1kΩ(连接至 2.5V) | 18 | ||
| Output voltage swing low (RL = 1kΩ, temperature) | 0.13 | V | G = +5,RL = 1kΩ(连接至 2.5V),TA = –40°C 至 +85°C | 18 | |||
| Output voltage swing low (RL = 150Ω) | 0.21 | 0.24 | V | G = +5,RL = 150Ω(连接至 2.5V) | 18 | ||
| Output voltage swing low (RL = 150Ω, temperature) | 0.26 | V | G = +5,RL = 150Ω(连接至 2.5V),TA = –40°C 至 +85°C | 18 | |||
| Output voltage swing high (RL = 1kΩ) | 4.89 | 4.91 | V | G = +5,RL = 1kΩ(连接至 2.5V) | 18 | ||
| Output voltage swing high (RL = 1kΩ, temperature) | 4.87 | V | G = +5,RL = 1kΩ(连接至 2.5V),TA = –40°C 至 +85°C | 18 | |||
| Output voltage swing high (RL = 150Ω) | 4.75 | 4.78 | V | G = +5,RL = 150Ω(连接至 2.5V) | 18 | ||
| Output voltage swing high (RL = 150Ω, temperature) | 4.72 | V | G = +5,RL = 150Ω(连接至 2.5V),TA = –40°C 至 +85°C | 18 | |||
| Output sourcing/sinking current | -60 | 80 | mA | VO = ±0.88V,VOS = 20mV | 18 | ||
| Output sourcing/sinking current (temperature) | -52 | mA | VO = ±0.88V,VOS = 20mV,TA = –40°C 至 +85°C | 18 | |||
| Quiescent current | 3.7 | 4.4 | 5 | mA | 18 | ||
| Quiescent current (temperature) | 3.1 | 5.7 | mA | TA = -40°C 至 +85°C | 18 | ||
| Power supply rejection ratio | PSRR | 61 | 66 | dB | 以输入为基准 | 18 | |
| Power supply rejection ratio (temperature) | PSRR | 59 | dB | 以输入为基准,TA = -40°C 至 +85°C | 18 | ||
| Supply voltage (DBV package) | -6.5 | 6.5 | VDC | 4 | |||
| Differential input voltage | -2.5 | 2.5 | V | 4 | |||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 125 | °C | 4 | ||
| Supply voltage VS | VS | 3 | 10 | 11 | V | 4 | |
| Operating temperature | TA | -40 | 85 | °C | 4 | ||
| Junction-to-ambient thermal resistance (DBV, 5-pin) | RθJA | 186.3 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance (DBV) | RθJC(top) | 84 | °C/W | 4 | |||
| Junction-to-board thermal resistance (DBV) | RθJB | 53.1 | °C/W | 4 | |||
| Junction-to-top characterization parameter (DBV) | ψJT | 21 | °C/W | 4 | |||
| Junction-to-board characterization parameter (DBV) | ψJB | 52.7 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
OPA830IDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
opa830idbvr-etched.step/opa830idbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa830idbvr.step/opa830idbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (61 pp, sha256
8002faf014f0e959, retrieved 2026-10-06, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).