Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC16F876-04I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil

PIC16F876-04I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR/VPP input Master Clear (Reset) input or programming voltage input, active low RESET to the device.
2 RA0/AN0 bidirectional PORTA bit 0 I/O (TTL), which can also be analog input 0.
3 RA1/AN1 bidirectional PORTA bit 1 I/O (TTL), which can also be analog input 1.
4 RA2/AN2/VREF- bidirectional PORTA bit 2 I/O (TTL), which can also be analog input 2 or the negative analog reference voltage.
5 RA3/AN3/VREF+ bidirectional PORTA bit 3 I/O (TTL), which can also be analog input 3 or the positive analog reference voltage.
6 RA4/T0CKI bidirectional PORTA bit 4 I/O (Schmitt Trigger), which can also be the clock input to Timer0; output is open drain type.
7 RA5/SS/AN4 bidirectional PORTA bit 5 I/O (TTL), which can also be analog input 4 or the slave select for the synchronous serial port.
8 VSS power_in Ground reference for logic and I/O pins.
9 OSC1/CLKIN input Oscillator crystal input or external clock source input (Schmitt Trigger in RC mode, CMOS otherwise).
10 OSC2/CLKOUT output Oscillator crystal output connecting to crystal or resonator; in RC mode it outputs CLKOUT at 1/4 the frequency of OSC1.
11 RC0/T1OSO/T1CKI bidirectional PORTC bit 0 I/O (Schmitt Trigger), which can also be the Timer1 oscillator output or Timer1 clock input.
12 RC1/T1OSI/CCP2 bidirectional PORTC bit 1 I/O (Schmitt Trigger), which can also be the Timer1 oscillator input or Capture2 input/Compare2 output/PWM2 output.
13 RC2/CCP1 bidirectional PORTC bit 2 I/O (Schmitt Trigger), which can also be the Capture1 input/Compare1 output/PWM1 output.
14 RC3/SCK/SCL bidirectional PORTC bit 3 I/O (Schmitt Trigger), which can also be the synchronous serial clock input/output for both SPI and I2C modes.
15 RC4/SDI/SDA bidirectional PORTC bit 4 I/O (Schmitt Trigger), which can also be the SPI Data In (SPI mode) or data I/O (I2C mode).
16 RC5/SDO bidirectional PORTC bit 5 I/O (Schmitt Trigger), which can also be the SPI Data Out (SPI mode).
17 RC6/TX/CK bidirectional PORTC bit 6 I/O (Schmitt Trigger), which can also be the USART asynchronous transmit or synchronous clock.
18 RC7/RX/DT bidirectional PORTC bit 7 I/O (Schmitt Trigger), which can also be the USART asynchronous receive or synchronous data.
19 VSS power_in Ground reference for logic and I/O pins.
20 VDD power_in Positive supply for logic and I/O pins.
21 RB0/INT bidirectional PORTB bit 0 I/O (TTL/Schmitt Trigger when configured as interrupt), which can also be the external interrupt pin; PORTB has software-programmable weak pull-ups.
22 RB1 bidirectional PORTB bit 1 bidirectional I/O (TTL) with software-programmable weak pull-up.
23 RB2 bidirectional PORTB bit 2 bidirectional I/O (TTL) with software-programmable weak pull-up.
24 RB3/PGM bidirectional PORTB bit 3 I/O (TTL), which can also be the low voltage programming input.
25 RB4 bidirectional PORTB bit 4 I/O (TTL) with interrupt-on-change.
26 RB5 bidirectional PORTB bit 5 I/O (TTL) with interrupt-on-change.
27 RB6/PGC bidirectional PORTB bit 6 I/O (TTL/Schmitt Trigger in programming mode), which is an interrupt-on-change pin or In-Circuit Debugger pin and the serial programming clock.
28 RB7/PGD bidirectional PORTB bit 7 I/O (TTL/Schmitt Trigger in programming mode), which is an interrupt-on-change pin or In-Circuit Debugger pin and the serial programming data.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-28-300mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -55 125 °C 149
Storage temperature -65 150 °C 149
Voltage on any pin with respect to VSS (except VDD, MCLR, RA4) -0.3 V Maximum printed as VDD + 0.3 V 149
Voltage on VDD with respect to VSS VDD -0.3 7.5 V 149
Voltage on MCLR with respect to VSS VMCLR 0 14 V Note 2 149
Voltage on RA4 with respect to VSS VRA4 0 8.5 V 149
Total power dissipation Pdis 1 W Note 1 149
Input clamp current IIK 20 mA VI < 0 or VI > VDD 149
Output clamp current IOK 20 mA VO < 0 or VO > VDD 149
Operating temperature (industrial) TA -40 85 °C Industrial; commercial range is 0 to +70 °C 152
VDD supply voltage VDD 4 5.5 V LP, XT, RC osc configuration 152
VDD supply voltage VDD 4.5 5.5 V HS osc configuration 152
Brown-out Reset voltage VBOR 3.7 4 4.35 V BODEN bit in configuration word enabled 152
VDD rise rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms See Power-on Reset section 152
Supply current IDD IDD 1.6 4 mA RC osc configurations, FOSC = 4 MHz, VDD = 5.5V 153
Brown-out Reset current IBOR 85 200 µA BOR enabled, VDD = 5.0V 153
Power-down current IPD 10.5 42 µA VDD = 4.0V, WDT enabled, -40C to +85C 154
Power-down current IPD 1.5 16 µA VDD = 4.0V, WDT enabled, -40C to +85C 154
Power-down current IPD 1.5 19 µA VDD = 4.0V, WDT enabled, -40C to +85C 154
Brown-out Reset current IBOR 85 200 µA BOR enabled, VDD = 5.0V 154
Input low voltage, I/O ports with TTL buffer VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V 155
Input low voltage, RC3 and RC4 with SMBus VIL -0.5 0.6 V for VDD = 4.5 to 5.5V 155
Input high voltage, I/O ports with TTL buffer VIH 2 V 4.5V ≤ VDD ≤ 5.5V 155
Input high voltage, RC3 and RC4 with SMBus VIH 1.4 5.5 V for VDD = 4.5 to 5.5V 155
PORTB weak pull-up current IPURB 50 250 400 µA VDD = 5V, VPIN = VSS, -40°C to +85°C 155
Input leakage current, I/O ports IIL 1 µA Vss ≤ VPIN ≤ VDD, pin at hi-impedance 155
Input leakage current, MCLR and RA4/T0CKI IIL 5 µA Vss ≤ VPIN ≤ VDD 155
Input leakage current, OSC1 IIL 5 µA Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration 155
Output low voltage, I/O ports VOL 0.6 V IOL = 8.5 mA, VDD = 4.5V, -40C to +85C 156
Output low voltage, OSC2/CLKOUT (RC osc config) VOL 0.6 V IOL = 1.6 mA, VDD = 4.5V, -40C to +85C 156
Open-drain high voltage VOD 8.5 V RA4 pin 156
OSC2 pin capacitive loading COSC2 15 pF In XT, HS and LP modes when external clock is used to drive OSC1 156
I/O pin capacitive loading CIO 50 pF All I/O pins and OSC2 (RC mode) 156
Bus capacitive loading CB 400 pF SCL, SDA (I2C mode) 156
VDD for read/write (data EEPROM) VDRW 5.5 V Using EECON to read/write, VMIN = min. operating voltage 156
Data EEPROM erase/write cycle time TDEW 4 8 ms 156
Program FLASH endurance EP 1000 E/W 25C at 5V 156
VDD for read (program FLASH) VPR 5.5 V VMIN = min operating voltage 156
VDD for erase/write (program FLASH) VDD 5.5 V Using EECON to read/write, VMIN = min. operating voltage 156
Program FLASH erase/write cycle time TPEW 4 8 ms 156
Instruction cycle time 2TCY 200 ns TCY = 4/FOSC 162
External CLKIN frequency, XT and RC osc mode FOSC 4 MHz XT and RC osc mode 162
External CLKIN period, XT and RC osc mode TOSC 250 ns XT and RC osc mode 162
External clock in (OSC1) high or low time, XT oscillator TosL,TosH 100 ns XT oscillator 162
OSC1 to CLKOUT TosH2ckL 75 200 ns (Note 1) 163
CLKOUT rise time TckR 35 100 ns (Note 1) 163
Port input invalid (I/O in hold time), standard (F) TosH2ioI 100 ns Standard (F) 163
Port output rise time, standard (F) TioR 10 40 ns Standard (F) 163
Port output fall time, standard (F) TioF 10 40 ns Standard (F) 163

CAD (KiCad official)

  • Symbol: PIC16F876-04I
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
  • 3D model files: pic16f876-04i-so-etched.step / pic16f876-04i-so-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f876-04i-so.step / pic16f876-04i-so.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (218 pp, sha256 2b2f4f67afe6ac63, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF