component
STM8S207C6T6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSTM8S207C6T6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)
STM8S207C6T6 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NRST | input | Reset input pin, active low |
| 2 | PA1/OSCIN | bidirectional | Port A1, resonator or crystal oscillator input |
| 3 | PA2/OSCOUT | bidirectional | Port A2, resonator or crystal oscillator output |
| 4 | VSSIO_1 | power_in | I/O power supply ground |
| 5 | VSS | power_in | Digital ground |
| 6 | VCAP | passive | External capacitor connection for 1.8 V regulator |
| 7 | VDD | power_in | Digital power supply 2.95 to 5.5 V |
| 8 | VDDIO_1 | power_in | I/O power supply 2.95 to 5.5 V |
| 9 | PA3/TIM2_CH3 | bidirectional | Port A3, Timer 2 channel 3 output, remappable as TIM3_CH1 |
| 10 | PA4/UART1_RX | bidirectional | Port A4, UART1 receive input, high sink output capable |
| 11 | PA5/UART1_TX | bidirectional | Port A5, UART1 transmit output, high sink output capable |
| 12 | PA6/UART1_CK | bidirectional | Port A6, UART1 synchronous clock, high sink output capable |
| 13 | VDDA | power_in | Analog power supply 2.95 to 5.5 V |
| 14 | VSSA | power_in | Analog ground |
| 15 | PB7/AIN7 | bidirectional | Port B7, analog input 7 |
| 16 | PB6/AIN6 | bidirectional | Port B6, analog input 6 |
| 17 | PB5/AIN5 | bidirectional | Port B5, analog input 5, remappable as I2C_SDA |
| 18 | PB4/AIN4 | bidirectional | Port B4, analog input 4, remappable as I2C_SCL |
| 19 | PB3/AIN3 | bidirectional | Port B3, analog input 3, remappable as TIM1_ETR |
| 20 | PB2/AIN2 | bidirectional | Port B2, analog input 2, remappable as TIM1_CH3N |
| 21 | PB1/AIN1 | bidirectional | Port B1, analog input 1, remappable as TIM1_CH2N |
| 22 | PB0/AIN0 | bidirectional | Port B0, analog input 0, remappable as TIM1_CH1N |
| 23 | PE7/AIN8 | bidirectional | Port E7, analog input 8 |
| 24 | PE6/AIN9 | bidirectional | Port E6, analog input 9 |
| 25 | PE5/SPI_NSS | bidirectional | Port E5, SPI master or slave select |
| 26 | PC1/TIM1_CH1 | bidirectional | Port C1, Timer 1 channel 1 output, high sink output capable |
| 27 | PC2/TIM1_CH2 | bidirectional | Port C2, Timer 1 channel 2 output, high sink output capable |
| 28 | PC3/TIM1_CH3 | bidirectional | Port C3, Timer 1 channel 3 output, high sink output capable |
| 29 | PC4/TIM1_CH4 | bidirectional | Port C4, Timer 1 channel 4 output, high sink output capable |
| 30 | PC5/SPI_SCK | bidirectional | Port C5, SPI serial clock, high sink output capable |
| 31 | VSSIO_2 | power_in | I/O power supply ground |
| 32 | VDDIO_2 | power_in | I/O power supply 2.95 to 5.5 V |
| 33 | PC6/SPI_MOSI | bidirectional | Port C6, SPI master out slave in, high sink output capable |
| 34 | PC7/SPI_MISO | bidirectional | Port C7, SPI master in slave out, high sink output capable |
| 35 | PG0/CAN_TX | bidirectional | Port G0, beCAN transmit (available on STM8S208xx only) |
| 36 | PG1/CAN_RX | bidirectional | Port G1, beCAN receive (available on STM8S208xx only) |
| 37 | PE3/TIM1_BKIN | bidirectional | Port E3, Timer 1 break input |
| 38 | PE2/I2C_SDA | tri_state | Port E2, I2C data line with true open-drain output |
| 39 | PE1/I2C_SCL | tri_state | Port E1, I2C clock line with true open-drain output |
| 40 | PE0/CLK_CCO | bidirectional | Port E0, configurable clock output, high sink output capable, remappable as TIM1_ETR |
| 41 | PD0/TIM3_CH2 | bidirectional | Port D0, Timer 3 channel 2 output, high sink output capable, remappable as TIM1_BKIN or CLK_CCO |
| 42 | PD1/SWIM | bidirectional | Port D1, SWIM single wire interface module data, high sink output capable |
| 43 | PD2/TIM3_CH1 | bidirectional | Port D2, Timer 3 channel 1 output, high sink output capable, remappable as TIM2_CH3 |
| 44 | PD3/TIM2_CH2 | bidirectional | Port D3, Timer 2 channel 2 output, high sink output capable, remappable as ADC_ETR |
| 45 | PD4/TIM2_CH1/BEEP | bidirectional | Port D4, Timer 2 channel 1 output or beeper output, high sink output capable |
| 46 | PD5/UART3_TX | bidirectional | Port D5, UART3 data transmit |
| 47 | PD6/UART3_RX | bidirectional | Port D6, UART3 data receive, default state controlled by ROM bootloader |
| 48 | PD7/TLI | bidirectional | Port D7, top level interrupt input, remappable as TIM1_CH4 |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
CAD (KiCad official)
- Symbol:
STM8S207C6T6 - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
stm8s207c6t6-etched.step/stm8s207c6t6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm8s207c6t6.step/stm8s207c6t6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (103 pp, sha256
e67f207b1c3d8b1c, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).