Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM4128CMF-3.3

Texas Instruments · Voltage References · SOT-23-5

LM4128CMF-3.3 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 N/C unconnected No connect pin; leave floating.
2 GND power_in Ground reference pin.
3 EN input Enable pin; the datasheet's enable levels are VIL maximum 35% and VIH minimum 65% (given as %V), and supply current drops to 3 µA typical in shutdown with EN = 0V.
4 VIN power_in Input supply; maximum input supply voltage is 5.5V, and the absolute maximum voltage on any input is -0.3 to 6V.
5 VREF power_out Reference voltage output; maximum load current is 20 mA and output short-circuit duration is indefinite.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage initial accuracy (LM4128C-3.3, C grade) VREF -0.5 0.5 % 7
Temperature coefficient (LM4128C-3.3) TCVREF / °C 100 ppm / °C 7
Supply current IQ 60 100 µA 7
Supply current in shutdown IQ_SD 3 7 µA EN = 0V 7
Load regulation ΔVREF/ΔILOAD 25 120 ppm / mA 0 mA ≤ ILOAD ≤ 20 mA 7
Dropout voltage VIN - VREF 175 400 mV ILOAD = 10 mA 7
Enable pin maximum low input level VIL 35 %V 7
Enable pin minimum high input level VIH 65 %V 7
Line regulation ΔVREF/ΔVIN 85 ppm / V VREF + 400 mV ≤ VIN ≤ 5.5V 7
Output noise voltage VN 310 µVPP 0.1 Hz to 10 Hz 7
Long term stability ΔVREF 50 ppm 1000 Hrs 7
Thermal hysteresis 75 ppm -40°C ≤ TJ ≤ +125°C 7
Short circuit current ISC 75 mA 7
Maximum voltage on any input -0.3 6 V 2
Power dissipation (TA = 25°C) PDiss 350 mW TA = 25°C, without PCB copper enhancements 2
Storage temperature range TSTG -65 150 °C 2
Lead temperature, soldering (10 sec) 260 °C soldering, 10 sec 2
Lead temperature, vapor phase (60 sec) 215 °C vapor phase, 60 sec 2
Lead temperature, infrared (15 sec) 220 °C infrared, 15 sec 2
ESD susceptibility, Human Body Model 2 kV Human Body Model 2
Maximum input supply voltage VIN 5.5 V 2
Maximum load current ILOAD 20 mA 2
Junction temperature range TJ -40 125 °C 2
Junction-to-ambient thermal resistance (SOT-23) θJ-A 220 °C/W SOT-23 package 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing Abs ESD Susceptibility(3) Human Body Model 2 kV (1) Absolute Maximum Ratings indicate limits beyond which damage may occur to the device. Operating Ratings indicate conditions for 2

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LM4128CMF-3.3
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lm4128cmf-3-3-etched.step / lm4128cmf-3-3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm4128cmf-3-3.step / lm4128cmf-3-3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 dba8a4a80be91bcb, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF