3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownADM3311EARSZ-REEL
Analog Devices · RS232 ICs · SSOP-28-208mil
ADM3311EARSZ-REEL from Analog Devices, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V+ | power_out | Internally generated positive supply of 7.25 V nominal, with capacitor C4 connected between VCC and V+. |
| 2 | C2+ | passive | Positive terminal of external charge pump capacitor C2; 0.1 µF recommended, with larger values up to 1 µF allowed. |
| 3 | VCC | power_in | Power supply input, 2.7 V to 3.6 V. |
| 4 | C2- | passive | Negative terminal of external charge pump capacitor C2; 0.1 µF recommended, with larger values up to 1 µF allowed. |
| 5 | EN | input | Receiver enable; a high level three-states all receiver outputs. |
| 6 | C1+ | passive | Positive terminal of external charge pump capacitor C1; 0.1 µF recommended, with larger values up to 1 µF allowed. |
| 7 | T1IN | input | Transmitter 1 driver input accepting TTL/CMOS levels, with an internal 400 kΩ pull-up resistor to VCC. |
| 8 | T2IN | input | Transmitter 2 driver input accepting TTL/CMOS levels, with an internal 400 kΩ pull-up resistor to VCC. |
| 9 | T3IN | input | Transmitter 3 driver input accepting TTL/CMOS levels, with an internal 400 kΩ pull-up resistor to VCC. |
| 10 | R1OUT | output | Receiver 1 output at TTL/CMOS levels. |
| 11 | R2OUT | output | Receiver 2 output at TTL/CMOS levels. |
| 12 | R3OUT | output | Receiver 3 output at TTL/CMOS levels. |
| 13 | R4OUT | output | Receiver 4 output at TTL/CMOS levels; disabled in shutdown on the ADM3311E. |
| 14 | R5OUT | output | Receiver 5 output at TTL/CMOS levels; this is the receiver that remains active in shutdown on the ADM3311E. |
| 15 | R5IN | input | Receiver 5 RS-232 input, protected to ±30 V, with an internal 5 kΩ pull-down resistor to GND. |
| 16 | R4IN | input | Receiver 4 RS-232 input, protected to ±30 V, with an internal 5 kΩ pull-down resistor to GND. |
| 17 | R3IN | input | Receiver 3 RS-232 input, protected to ±30 V, with an internal 5 kΩ pull-down resistor to GND. |
| 18 | R2IN | input | Receiver 2 RS-232 input, protected to ±30 V, with an internal 5 kΩ pull-down resistor to GND. |
| 19 | R1IN | input | Receiver 1 RS-232 input, protected to ±30 V, with an internal 5 kΩ pull-down resistor to GND. |
| 20 | T3OUT | output | Transmitter 3 RS-232 output, typically ±6.4 V for the ADM3311E. |
| 21 | T2OUT | output | Transmitter 2 RS-232 output, typically ±6.4 V for the ADM3311E. |
| 22 | T1OUT | output | Transmitter 1 RS-232 output, typically ±6.4 V for the ADM3311E. |
| 23 | SD | input | Shutdown control; a high level disables the charge pump and reduces quiescent current to less than 1 µA, disabling all transmitters and most receivers. |
| 24 | C1- | passive | Negative terminal of external charge pump capacitor C1; 0.1 µF recommended, with larger values up to 1 µF allowed. |
| 25 | V- | power_out | Internally generated negative supply of −7.25 V nominal, with capacitor C5 connected between GND and V-. |
| 26 | C3- | passive | Negative terminal of external charge pump capacitor C3; 0.1 µF recommended, with larger values up to 1 µF allowed. |
| 27 | GND | power_in | Ground pin, must be connected to 0 V. |
| 28 | C3+ | passive | Positive terminal of external charge pump capacitor C3; 0.1 µF recommended, with larger values up to 1 µF allowed. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SSOP-28-208mil |
| Category | Interface ICs |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VCC | 2.7 | 3.3 | 3.6 | V | 4 | |
| VCC Power Supply Current | ICC | 0.45 | 1 | mA | No load; VCC = 3.0 V to 3.6 V; TA = 0°C to 85°C | 4 | |
| VCC Power Supply Current | ICC | 0.45 | 4.5 | mA | No load; VCC = 2.7 V to 3.6 V; TA = − 40°C to +85°C | 4 | |
| Shutdown Supply Current | ICC | 0.02 | 1 | µA | 4 | ||
| Input Pull-Up Current | IIH | 10 | 25 | µA | TIN = GND | 4 | |
| Input Leakage Current, SD, EN | IIL | -1 | 0.02 | 1 | µA | 4 | |
| Input Logic Threshold Low | VINL | 0.8 | V | TIN, EN, SHDN | 4 | ||
| Input Logic Threshold Low | VINL | 0.4 | V | TIN, EN, SHDN; VCC = 2.7 V | 4 | ||
| Input Logic Threshold High | VINH | 2 | V | TIN, EN, SHDN | 4 | ||
| CMOS Output Voltage Low | VOL | 0.4 | V | IOUT = 1.6 mA | 4 | ||
| CMOS Output Leakage Current | IOZ | -5 | 0.05 | 5 | µA | EN = VCC, 0 V < ROUT < VCC; ADM3310E, ADM3311E | 4 |
| EIA-232 Input Voltage Range | VIN | -25 | 25 | V | 4 | ||
| EIA-232 Input Threshold Low | VIL | 0.4 | 1.3 | V | 4 | ||
| EIA-232 Input Threshold High | VIH | 2 | 2.4 | V | 4 | ||
| EIA-232 Input Resistance | RIN | 3 | 5 | 7 | kΩ | ADM3307E, ADM3310E, ADM3311E, ADM3312E | 4 |
| Output Voltage Swing | VO | 5 | 6.4 | V | VCC = 3.0 V; all transmitter outputs loaded with 3 kΩ to ground; ADM3307E, ADM3311E, ADM3312E | 4 | |
| Output Voltage Swing | VO | 5.5 | V | VCC = 2.7 V; all transmitter outputs loaded with 3 kΩ to ground; ADM3307E, ADM3311E, ADM3312E | 4 | ||
| Transmitter Output Resistance | ROUT | 300 | Ω | VCC = 0 V, VOUT = ±2 V | 4 | ||
| RS-232 Output Short-Circuit Current | IOS | 15 | 60 | mA | 4 | ||
| Maximum Data Rate | 250 | 460 | kbps | RL = 3 kΩ to 7 kΩ, CL = 50 pF to 1000 pF, VCC = 3.0 V; ADM3310E, ADM3311E, ADM3312E, ADM3315E | 5 | ||
| Receiver Output Enable Time | tER | 100 | ns | 5 | |||
| Receiver Output Disable Time | tDR | 300 | ns | 5 | |||
| Transmitter Propagation Delay | TPHL, TPLH | 500 | ns | RL = 3 kΩ, CL = 1000 pF | 5 | ||
| Transition Region Slew Rate | SR | 3 | 18 | V/µs | RL = 3 kΩ, CL = 50 pF to 1000 pF | 5 | |
| ESD Protection (I/O pins), Human Body Model | -15 | 15 | kV | Human body model | 5 | ||
| ESD Protection (I/O pins), IEC 1000-4-2 air discharge | -15 | 15 | kV | IEC 1000-4-2 air discharge | 5 | ||
| ESD Protection (I/O pins), IEC 1000-4-2 contact discharge | -8 | 8 | kV | IEC 1000-4-2 contact discharge; includes CMOS I/O, SD, and EN for ADM3307E | 5 | ||
| VCC Supply Voltage | VCC | -0.3 | 4 | V | 6 | ||
| V+ Output Voltage | V+ | 9 | V | (VCC − 0.3 V) to +9 V | 6 | ||
| V− Output Voltage | V- | -9 | 0.3 | V | +0.3 V to −9 V | 6 | |
| TIN Input Voltage | TIN | -0.3 | 6 | V | 6 | ||
| RIN Input Voltage | RIN | -30 | 30 | V | 6 | ||
| TOUT Output Voltage | TOUT | -15 | 15 | V | 6 | ||
| ROUT Output Voltage | ROUT | -0.3 | V | Upper limit (VCC + 0.3 V) | 6 | ||
| Operating Temperature Range (Industrial, A Version) | TA | -40 | 85 | °C | 6 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 6 | ||
| Lead Temperature (Soldering) | 300 | °C | 10 sec | 6 | |||
| ESD Rating (IEC 1000-4-2 Air), RS-232 I/Os | -15 | 15 | kV | RS-232 I/Os | 6 | ||
| ESD Rating (IEC 1000-4-2 Contact), RS-232 I/Os | -8 | 8 | kV | RS-232 I/Os | 6 | ||
| Receiver Propagation Delay | TPHL, TPLH | 0.3 | µs | CL = 150 pF | 4 | ||
| EIA-232 Input Hysteresis | 0.14 | V | 4 | ||||
| Charge Pump Output Voltage, V+ | V+ | 7.25 | V | No load; ADM3307E, ADM3311E, ADM3312E | 4 | ||
| Charge Pump Output Voltage, V− | V- | -7.25 | V | No load; ADM3307E, ADM3311E, ADM3312E | 4 | ||
| Thermal Impedance, θJA (SSOP, RS-28) | θJA | 76 | °C/W | SSOP (RS-28) | 6 |
CAD (KiCad official)
- Symbol:
ADM3311EARSZ-REEL - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
adm3311earsz-etched.step/adm3311earsz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adm3311earsz.step/adm3311earsz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
19555870393bbfda, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).