Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ISL60002CIH325Z-TK

RENESAS · Voltage References · SOT-23-3

ISL60002CIH325Z-TK from RENESAS, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VIN power_in Power supply input; for the ISL60002-25 the supply range is 2.7V to 5.5V, and VIN to GND is rated -0.5V to +6.5V as an absolute maximum.
2 VOUT power_out Voltage reference output (2.500V nominal for the ISL60002-25); VOUT to GND is rated -0.5V to +VOUT + 1V for 10s maximum, and the output is specified for ISOURCE and ISINK = 7mA.
3 GND power_in Ground reference pin for the device.

Key specifications

Parameter Value
Manufacturer RENESAS
Package SOT-23-3
Category Power Management
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VOUT Accuracy (ISL60002C25) VOA -2.5 2.5 mV TA = +25°C 7
Input Voltage Range VIN 2.7 5.5 V 7
Supply Current IIN 350 900 nA 9
Line Regulation ΔVOUT/ΔVIN 80 250 µV/V +2.7V ≤ VIN ≤ +5.5V 9
Load Regulation (source) ΔVOUT/ΔIOUT 25 100 µV/mA 0mA ≤ ISOURCE ≤ 7mA 9
Load Regulation (sink) ΔVOUT/ΔIOUT 50 150 µV/mA -7mA ≤ ISINK ≤ 0mA 9
Thermal Hysteresis ΔVOUT/ΔTA 100 ppm ΔTA = +125°C 9
Long Term Stability ΔVOUT/Δt 50 ppm TA = +25°C; first 1khrs 9
Short-Circuit Current (to GND) ISC 50 mA TA = +25°C 9
Output Voltage Temperature Coefficient TC VOUT 20 ppm/°C 9
Output Voltage VOUT 2.5 V 7
Output Voltage Noise VN 30 µVP-P 0.1Hz ≤ f ≤ 10Hz 9
Operating Temperature Range (Industrial) -40 85 °C 5
VIN to GND VIN -0.5 6.5 V 5
VOUT to GND (10s) VOUT -0.5 V 10s; printed as +VOUT + 1V 5
ESD Human Body Model 5.5 kV 5
ESD Machine Model 550 V 5
ESD Charged Device Model 2 kV 5
Maximum Junction Temperature (Plastic Package) TJ 107 °C 5
Storage Temperature Range TSTG -65 150 °C 5
Thermal Resistance Junction-to-Ambient θJA 275 °C/W 3 Ld SOT-23 (Notes 7, 8) 5
Thermal Resistance Junction-to-Case θJC 110 °C/W 3 Ld SOT-23 (Note 8) 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing Abs Jan 14, 2019 23.00 Page 1 Features - corrected ESD rating listed as 5.5V (Human Body Model) to 5.5kV. Changed the ESD HBM in Abs Max section on page 5 from 5500V to 5.5kV. 38

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: ISL60002CIH325Z-TK
  • Footprint: Package_TO_SOT_SMD:SOT-23-3
  • 3D model: SOT-23-3, generated on the KiCad land (body 1.3 x 2.92 mm, terminals on the pads, 1.0 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: isl60002cih325z-tk-etched.step / isl60002cih325z-tk-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); isl60002cih325z-tk.step / isl60002cih325z-tk.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (40 pp, sha256 bfe4b2f228c08447, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF