3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMCP795W22-I
Microchip Tech · Real-time Clocks (RTC) · TSSOP-14
MCP795W22-I from Microchip Tech, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | X1 | input | Quartz crystal input for a 32.768 kHz crystal (optimized for 6-9 pF load), also the external clock input when EXTOSC is used. |
| 2 | X2 | output | Quartz crystal output for a 32.768 kHz crystal; left floating when an external clock is applied to X1. |
| 3 | VBAT | power_in | Battery backup supply input maintaining RTCC and SRAM during VCC loss, with a backup range of 1.3V to 3.6V; connect to VSS if unused and apply VCC before VBAT. |
| 4 | WDO | output | Open-drain Watchdog Timer output (and optionally alarm output) that requires a pull-up to VCC, typically 10 k, and may be left floating if unused. |
| 5 | IRQ | output | Open-drain interrupt output for the event detect modules and optionally alarms, requiring a pull-up to VCC or VBAT, typically 10 k. |
| 6 | CS | input | Active-low chip select that selects the device; SO enters high-impedance when deselected and a high-to-low transition is required after power-up. |
| 7 | VSS | power_in | Ground reference for the device. |
| 8 | SO | output | Serial data output that shifts data out after the falling edge of SCK and is high-impedance when CS is high. |
| 9 | SI | input | Serial data input that receives instructions, addresses and data, latched on the rising edge of SCK. |
| 10 | SCK | input | Serial clock input synchronizing SPI communication; SI is latched on the rising edge and SO updates after the falling edge. |
| 11 | EVHS | input | Input for the high-speed event detect module, to be tied to VCC or VSS if the module is unused. |
| 12 | EVLS | input | Input for the low-speed event detect module (switch debouncing), to be tied to VCC or VSS if the module is unused. |
| 13 | CLKOUT | output | Square wave clock output with selectable frequency; may be left floating if not used. |
| 14 | VCC | power_in | Primary power supply with an operating voltage range of 1.8V to 3.6V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TSSOP-14 |
| Category | RTC/Clock Chip |
| Pins | 14 |
CAD (KiCad official)
- Symbol:
MCP795W22-I - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
mcp795w22-i-etched.step/mcp795w22-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp795w22-i.step/mcp795w22-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (68 pp, sha256
faa1ae568a047d17, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).