Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TMP4718ADGKR

Texas Instruments · IC · VSSOP-8

TMP4718ADGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VDD power_in Supply pin; bypass to GND with a 0.1-µF capacitor, with a recommended supply range of 1.62 V to 5.5 V.
2 DP bidirectional Positive connection to the remote temperature sensor; connect DP to DN if no remote diode is used, and a 470-pF capacitor between DP and DN can be added for noise filtering if needed.
3 DN bidirectional Negative connection to the remote temperature sensor; connect DP to DN if no remote diode is used, and a 470-pF capacitor between DP and DN can be added for noise filtering if needed.
4 T_CRIT bidirectional Open-drain critical temperature alert pin that requires a pullup resistor to VDD (or a separate bus), whose value sets the default T_CRIT and ALERT high-temperature limits.
5 GND power_in Ground connection.
6 ALERT bidirectional Open-drain temperature alert pin that requires a pullup resistor to VDD (or a separate bus), whose value sets the default T_CRIT and ALERT high-temperature limits.
7 SDA bidirectional Open-drain serial data line that requires a pullup resistor; absolute maximum I/O voltage is 6 V and I/O current is limited to 10 mA.
8 SCL input Open-drain serial clock input line; I2C clock stretching is not supported.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD -0.3 6 V 5
I/O voltage DP -0.3 1.65 V 5
I/O voltage DN -0.3 0.3 V 5
I/O voltage ALERT, T_CRIT, SCL, SDA -0.3 6 V 5
I/O current ALERT, T_CRIT, SDA -10 10 mA 5
Operating junction temperature TJ -55 150 °C 5
Storage temperature Tstg -65 150 °C 5
Supply voltage VDD 1.62 3.3 5.5 V 5
I/O voltage DP VI/O 0 1.2 V 5
I/O voltage DN VI/O 0 0 V 5
I/O voltage ALERT, T_CRIT, SCL, SDA VI/O 0 5.5 V 5
I/O current ALERT, T_CRIT, SDA II/O 3 mA 5
Operating ambient temperature TA -40 125 °C 5
Local temperature accuracy TERR_L -1 1 °C TA = -40°C to 125°C 6
Remote temperature accuracy (optimized for MMBT3904 NPN transistor) TERR_R -0.8 0.8 °C TD = -10°C to 85°C, TA = -10°C to 85°C 6
Remote temperature accuracy (optimized for MMBT3904 NPN transistor) TERR_R -1 1 °C TD = -55°C to 125°C, TA = -10°C to 85°C 6
Remote temperature accuracy (optimized for MMBT3904 NPN transistor) TERR_R -1.5 1.5 °C TD = -55°C to 125°C, TA = -40°C to 125°C 6
Conversion time, local conversion only tCONV 16 17.7 19.4 ms Local conversion only, one-shot mode 6
Conversion time, remote + local conversion tCONV 32 34.3 37 ms Remote conversion + local conversion, one-shot mode 6
Timing variation tVAR -10 10 % Conversion period 6
ALERT and T_CRIT pullup resistor tolerance requirement RTOL -1 1 % 6
Input logic high level VIH 0.9 V SCL, SDA 6
Input logic low level VIL 0.4 V SCL, SDA 6
Input leakage current ILI -0.1 0.1 μA ALERT, T_CRIT, SCL, SDA 6
Output leakage current ILO -0.1 0.1 μA ALERT, T_CRIT, SDA 6
Output low level VOL 0.4 V ALERT, T_CRIT, SDA, IOL = 3 mA 6
Active conversion current, local sensor IDD_ACTIVE 100 150 μA TA = -40°C to 125°C, serial bus inactive, local sensor 6
Active conversion current, remote sensor IDD_ACTIVE 220 320 μA TA = -40°C to 125°C, serial bus inactive, remote sensor 6
Standby current IDD_SB 1 1.5 μA Serial bus inactive, TA = 25°C 6
Standby current IDD_SB 5.5 μA Serial bus inactive, TA = -40°C to 125°C 6
Shutdown current IDD_SD 0.5 0.8 μA Serial bus inactive, TA = 25°C 7
Shutdown current IDD_SD 5 μA Serial bus inactive, TA = -40°C to 125°C 7
Shutdown current, serial bus active IDD_SD 6.9 μA Serial bus active, fs = 400 kHz 7
Shutdown current, serial bus active IDD_SD 15.2 μA Serial bus active, fs = 1 MHz 7
Power-on reset threshold voltage VPOR 1.2 1.4 V Supply rising 7
Brownout detect 1 1.1 V Supply falling 7
Device initialization time tPOR 35 ms 7
Maximum supported forward diode voltage VFMAX 1.1 V 6
Maximum supported series resistance on remote channel RSERIES 1000 Ω 6
SCL operating frequency f(SCL) 1 100 kHz Standard mode 7
SCL operating frequency f(SCL) 1 400 kHz Fast mode 7
SCL operating frequency f(SCL) 1 1000 kHz Fast mode plus 7
SCL clock low period t(LOW) 4.7 µs Standard mode 7
SCL clock low period t(LOW) 1.3 µs Fast mode 7
SCL clock low period t(LOW) 0.5 µs Fast mode plus 7
SCL clock high period t(HIGH) 4 µs Standard mode 7
SCL clock high period t(HIGH) 0.6 µs Fast mode 7
SCL clock high period t(HIGH) 0.26 µs Fast mode plus 7
Data setup time t(SUDAT) 250 ns Standard mode 7
Data setup time t(SUDAT) 100 ns Fast mode 7
Data setup time t(SUDAT) 50 ns Fast mode plus 7
Timeout (SCL = GND) ttimeout 20 30 ms SCL = GND, Standard mode 7
Junction-to-ambient thermal resistance RθJA 185.7 °C/W 5
Junction-to-case (top) thermal resistance RθJC(top) 76.3 °C/W 5
Junction-to-board thermal resistance RθJB 107.5 °C/W 5
Junction-to-top characterization parameter ψJT 16.8 °C/W 5
Junction-to-board characterization parameter ψJB 105.9 °C/W 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
shell copper shield them from extrinsic noise sources. 5-mil (0.127 mm) PCB traces are recommended. 3. Minimize additional thermocouple junction induced offset voltage caused by copper-to-solder connections. 41

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TMP4718ADGKR
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tmp4718adgkr-etched.step / tmp4718adgkr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tmp4718adgkr.step / tmp4718adgkr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (50 pp, sha256 b66639856d88a4c2, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF