Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM35CH

Texas Instruments · Temperature Sensors · TO-46-3

LM35CH from Texas Instruments, in a TO-46-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 +VS power_in Positive power supply pin, recommended operating range 4 V to 30 V (absolute maximum 35 V).
2 VOUT output Temperature sensor analog output, scaled at +10 mV/°C.
3 GND power_in Device ground pin, connect to power supply negative terminal; the case is connected to this pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TO-46-3
Category Sensors
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Accuracy, LM35C -1 0.4 1 °C TA = 25°C; typ ±0.4, tested limit ±1 8
Accuracy, LM35C -1.5 0.5 1.5 °C TA = -10°C; typ ±0.5, design limit ±1.5 8
Accuracy, LM35C -1.5 0.8 1.5 °C TA = TMAX; typ ±0.8, tested limit ±1.5 8
Accuracy, LM35C -2 0.8 2 °C TA = TMIN; typ ±0.8, design limit ±2 8
Nonlinearity -0.5 0.2 0.5 °C TMIN ≤ TA ≤ TMAX, -40°C ≤ TJ ≤ 125°C; typ ±0.2, design limit ±0.5 8
Sensor gain (average slope) 9.8 10 10.2 mV/°C TMIN ≤ TA ≤ TMAX, -40°C ≤ TJ ≤ 125°C 8
Load regulation -2 0.4 2 mV/mA 0 ≤ IL ≤ 1 mA, TA = 25°C; typ ±0.4, tested limit ±2 8
Load regulation -5 0.5 5 mV/mA 0 ≤ IL ≤ 1 mA, TMIN ≤ TA ≤ TMAX, -40°C ≤ TJ ≤ 125°C; typ ±0.5, design limit ±5 8
Line regulation -0.1 0.01 0.1 mV/V TA = 25°C; typ ±0.01, tested limit ±0.1 8
Line regulation -0.2 0.02 0.2 mV/V 4 V ≤ VS ≤ 30 V, -40°C ≤ TJ ≤ 125°C; typ ±0.02, design limit ±0.2 8
Quiescent current IQ 56 80 µA VS = 5 V, 25°C 8
Quiescent current IQ 91 138 µA VS = 5 V, -40°C ≤ TJ ≤ 125°C 8
Quiescent current IQ 56.2 82 µA VS = 30 V, 25°C 8
Quiescent current IQ 91.5 141 µA VS = 30 V, -40°C ≤ TJ ≤ 125°C 8
Change of quiescent current 0.2 2 µA 4 V ≤ VS ≤ 30 V, 25°C 8
Change of quiescent current 0.5 3 µA 4 V ≤ VS ≤ 30 V, -40°C ≤ TJ ≤ 125°C 8
Temperature coefficient of quiescent current 0.39 0.7 µA/°C -40°C ≤ TJ ≤ 125°C 8
Minimum temperature for rate accuracy 1.5 2 °C In circuit of Figure 14, IL = 0 8
Long term stability 0.08 °C TJ = TMAX, for 1000 hours; typ ±0.08 8
Supply voltage -0.2 35 V 4
Output voltage -1 6 V 4
Output current 10 mA 4
Maximum junction temperature TJmax 150 °C 4
Storage temperature Tstg -60 150 °C TO-CAN, TO-92 package 4
ESD HBM V(ESD) -2500 2500 V Human-body model per ANSI/ESDA/JEDEC JS-001 4
Specified operating temperature TMIN to TMAX -40 110 °C LM35C, LM35CA 4
Supply voltage +VS 4 30 V 4
Junction-to-ambient thermal resistance RθJA 400 °C/W NDV package, 3 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 24 °C/W NDV package, 3 pins 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper this is especially true for the TO-92 plastic package. The copper leads in the TO-92 package are the principal 19

CAD (KiCad official)

  • Symbol: LM35CH
  • Footprint: Package_TO_SOT_THT:TO-46-3
  • 3D model: TO-46-3 (KiCad packages3D, STEP)
  • 3D model files: lm35ch-etched.step / lm35ch-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm35ch.step / lm35ch.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (37 pp, sha256 5e2ccf93376a50a8, retrieved 2026-10-23, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF