Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS259521DSGR

Texas Instruments · Monitors & Reset Circuits · WSON-8-EP(2x2)

TPS259521DSGR from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 dVdt bidirectional A capacitor from this pin to GND sets the output turn on slew rate; leave this pin floating for the fastest turn on slew rate.
2 EN/UVLO input Active high enable for the TPS259521; a resistor divider can be used to adjust the undervoltage lockout threshold and must not be left floating.
3 IN power_in Power input; input voltage range 2.7 V to 18 V.
4 IN power_in Power input; input voltage range 2.7 V to 18 V.
5 OUT power_out Power output; output voltage 0 to VIN + 0.3 V.
6 FLT tri_state Fault event indicator pulled low when a fault is detected; open-drain output requiring external pull-up resistance.
7 ILM bidirectional Current limit and monitor pin; an external resistor from this pin to GND sets the output current limit (487 Ω to 5000 Ω) and pin voltage monitors output load current; must not be left floating.
8 GND power_in Ground reference connection.
9 GND power_in Exposed thermal pad for heat dissipation and must be connected to GND.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-8-EP(2x2)
Category Power Supply Chip
Pins 9

CAD (KiCad official)

  • Symbol: TPS259521DSGR
  • Footprint: Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm
  • 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: tps259521dsgr-etched.step / tps259521dsgr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps259521dsgr.step / tps259521dsgr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (49 pp, sha256 c6982dad9247501e, retrieved 2026-09-18, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF