component
CD4053AMS
Public Unreviewedby Ray
HGSEMI Analog Switches, Multiplexers, QSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
PCB Footprint
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
Datasheet
Open in new tab ↗Loads on click. Unloads when scrolled away or the tab is hidden.
README
markdownCD4053AMS
HGSEMI · Analog Switches, Multiplexers · QSOP-16
CD4053AMS from HGSEMI, in a QSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S2B | bidirectional | Switch 2, channel B analog input/output. Connected to common D2 when SEL2=1 and EN=0. |
| 2 | S2A | bidirectional | Switch 2, channel A analog input/output. Connected to common D2 when SEL2=0 and EN=0. |
| 3 | S3B | bidirectional | Switch 3, channel B analog input/output. Connected to common D3 when SEL3=1 and EN=0. |
| 4 | D3 | bidirectional | Switch 3 common (pole) analog input/output. Routed to S3A or S3B under SEL3 control. |
| 5 | S3A | bidirectional | Switch 3, channel A analog input/output. Connected to common D3 when SEL3=0 and EN=0. |
| 6 | EN | input | Active-low enable input. When EN=high all three switches are open (all channels off). When EN=low, SEL1/SEL2/SEL3 select the active channel of each switch. VIL/VIH scale with VDD (e.g. VIH=3.5V min at VDD=5V). |
| 7 | VSS | power_in | Negative analog supply. Sets the negative rail for the analog switch. Tie to GND for unipolar operation; set below GND (e.g. -5V) to switch bipolar signals. VDD-VSS range 3V to 15V (18V absolute max). |
| 8 | GND | power_in | Digital ground (0 V). Reference for the SEL1/SEL2/SEL3 and EN digital control inputs. |
| 9 | SEL3 | input | Address/select bit for switch 3. When EN=low, SEL3=0 routes S3A→D3, SEL3=1 routes S3B→D3. |
| 10 | SEL2 | input | Address/select bit for switch 2. When EN=low, SEL2=0 routes S2A→D2, SEL2=1 routes S2B→D2. |
| 11 | SEL1 | input | Address/select bit for switch 1. When EN=low, SEL1=0 routes S1A→D1, SEL1=1 routes S1B→D1. |
| 12 | S1A | bidirectional | Switch 1, channel A analog input/output. Connected to common D1 when SEL1=0 and EN=0. |
| 13 | S1B | bidirectional | Switch 1, channel B analog input/output. Connected to common D1 when SEL1=1 and EN=0. |
| 14 | D1 | bidirectional | Switch 1 common (pole) analog input/output. Routed to S1A or S1B under SEL1 control. |
| 15 | D2 | bidirectional | Switch 2 common (pole) analog input/output. Routed to S2A or S2B under SEL2 control. |
| 16 | VDD | power_in | Positive supply. Recommended operating range 3V to 15V (18V absolute max) referenced to VSS. Add a 0.1 μF to 10 μF decoupling capacitor between VDD/VSS and GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | QSOP-16 |
| Category | Interface |
| Pins | 16 |
Ordering variants
Same part, different packaging or reel option.
CD4053AMS/TRCD4053AMSNCD4053AMSM/TRCD4053AMSMT/TRCD4053AMSLQ/TR
CAD (KiCad official)
- Symbol:
CD4053AMS - Footprint:
Package_SO:QSOP-16_3.9x4.9mm_P0.635mm - 3D model: QSOP-16 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (12 pp, sha256
233189e11ac94755, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).