component
R5F64112DFB#U0
Public Made by Adomby adom
RENESAS RENESAS, LQFP-100(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownR5F64112DFB#U0
RENESAS · RENESAS · LQFP-100(14x14)
R5F64112DFB#U0 from RENESAS, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P9_4 | bidirectional | CMOS I/O port P9_4 powered from VCC1, also serving as UART4 handshake pins, Timer B4 input and D/A converter 1 output. |
| 2 | P9_3 | bidirectional | CMOS I/O port P9_3 powered from VCC1 (pull-up selectable), also Timer B3 input and D/A converter 0 output. |
| 3 | VDC0 | passive | Connection pin for the internal voltage decoupling capacitor, which is connected between VDC0 and VDC1. |
| 4 | P9_1 | input | CMOS input-only port P9_1 powered from VCC1, with a selectable pull-up resistor. |
| 5 | VDC1 | passive | Connection pin for the internal voltage decoupling capacitor, which is connected between VDC0 and VDC1. |
| 6 | NSD | bidirectional | Debug port pin used to communicate with a debugger; it should be connected to VCC1 via a resistor of 1 to 4.7 kΩ. |
| 7 | CNVSS | input | CNVSS mode pin that should be connected to VSS via a resistor. |
| 8 | XCIN/P8_7 | input | Sub clock input for the sub clock oscillator (crystal between XCIN and XCOUT), or an external clock input with XCOUT left open; also port P8_7. |
| 9 | XCOUT/P8_6 | output | Sub clock output of the sub clock oscillator, left open when an external clock is input on XCIN; also port P8_6. |
| 10 | RESET | input | Reset input; the MCU is reset when this pin is driven low. |
| 11 | XOUT | output | Main clock output of the main clock oscillator (crystal or ceramic resonator between XIN and XOUT); left open when an external clock is input on XIN. |
| 12 | VSS | power_in | Ground pin; VSS = 0 V. |
| 13 | XIN | input | Main clock input for the main clock oscillator (crystal or ceramic resonator between XIN and XOUT); an external clock is input here with XOUT open. |
| 14 | VCC1 | power_in | Power supply pin; VCC1 and VCC2 must be 3.0 to 5.5 V with VCC1 ≥ VCC2. |
| 15 | P8_5/NMI | bidirectional | Non-maskable interrupt input (NMI) on a CMOS I/O port pin powered from VCC1. |
| 16 | INT2/P8_4 | bidirectional | External interrupt input INT2 on CMOS I/O port P8_4 powered from VCC1. |
| 17 | INT1/P8_3 | bidirectional | External interrupt input INT1 on CMOS I/O port P8_3 powered from VCC1. |
| 18 | INT0/P8_2 | bidirectional | External interrupt input INT0 on CMOS I/O port P8_2 powered from VCC1. |
| 19 | P8_1 | bidirectional | CMOS I/O port P8_1 with Intelligent I/O group 1 input capture/output compare, two-phase encoder input, UART5 handshake/SS, three-phase motor output U and Timer A4 input. |
| 20 | P8_0 | bidirectional | CMOS I/O port P8_0 with two-phase encoder input, UART5 receive/I2C clock/slave transmit, three-phase motor output U and Timer A4 output. |
| 21 | P7_7 | bidirectional | CMOS I/O port P7_7 with Intelligent I/O group 1, two-phase encoder input, UART5 clock and Timer A3 input. |
| 22 | P7_6 | bidirectional | CMOS I/O port P7_6 with Intelligent I/O group 1, two-phase encoder input, UART5 transmit/I2C data, UART8 handshake and Timer A3 output. |
| 23 | P7_5 | bidirectional | CMOS I/O port P7_5 with Intelligent I/O group 1, UART8 receive, three-phase motor output W and Timer A2 input. |
| 24 | P7_4 | bidirectional | CMOS I/O port P7_4 with Intelligent I/O group 1, UART8 clock, three-phase motor output W and Timer A2 output. |
| 25 | P7_3 | bidirectional | CMOS I/O port P7_3 with Intelligent I/O group 1, UART2 handshake/SS, UART8 transmit, three-phase motor output V and Timer A1 input. |
| 26 | P7_2 | bidirectional | CMOS I/O port P7_2 with Timer A1 output, three-phase motor output V and UART2 clock; this port is an N-channel open drain output. |
| 27 | P7_1 | bidirectional | CMOS port P7_1 configured as N-channel open drain output, with Timer A0/B5 input, UART2 receive/I2C clock, Intelligent I/O and serial interface functions. |
| 28 | P7_0 | bidirectional | CMOS port P7_0 configured as N-channel open drain output, with Timer A0 output, UART2 transmit/I2C data, Intelligent I/O and serial interface outputs. |
| 29 | P6_7 | bidirectional | CMOS I/O port P6_7 with UART1 transmit and I2C data (SDA1) functions, powered from VCC1 or VCC2 as applicable. |
| 30 | P6_6 | bidirectional | CMOS I/O port P6_6 with UART1 receive and I2C clock (SCL1) functions. |
| 31 | P6_5 | bidirectional | CMOS I/O port P6_5 with UART1 transmit/receive clock function. |
| 32 | P6_4 | bidirectional | CMOS I/O port P6_4 with UART1 handshake/SS, Intelligent I/O group 2 output and serial interface clock functions. |
| 33 | P6_3 | bidirectional | CMOS I/O port P6_3 with UART0 transmit and I2C data (SDA0) functions. |
| 34 | P6_2 | bidirectional | CMOS I/O port P6_2 with Timer B2 input and UART0 receive/I2C clock functions. |
| 35 | P6_1 | bidirectional | CMOS I/O port P6_1 with Timer B1 input and UART0 clock functions. |
| 36 | P6_0 | bidirectional | CMOS I/O port P6_0 with Timer B0 input and UART0 handshake/SS functions. |
| 37 | P5_7 | bidirectional | CMOS I/O port P5_7 with bus control RDY (bus cycle extended when low on falling edge of BCLK), chip select CS3 and UART7 handshake functions. |
| 38 | P5_6 | bidirectional | CMOS I/O port P5_6 with bus control ALE (multiplexed bus latch enable), chip select CS2 and UART7 receive functions. |
| 39 | P5_5 | bidirectional | CMOS I/O port P5_5 with bus HOLD input (MCU held in hold state while low) and UART7 clock functions. |
| 40 | P5_4 | bidirectional | CMOS I/O port P5_4 with bus HLDA output (driven low during hold state), chip select CS1 and UART7 transmit functions. |
| 41 | P5_3 | bidirectional | CMOS I/O port P5_3 with clock output CLKOUT (same frequency as low-speed clocks, f8 or f32) and BCLK output, powered from VCC2. |
| 42 | P5_2 | bidirectional | CMOS I/O port P5_2 with bus read signal RD, which indicates data is read when low. |
| 43 | P5_1 | bidirectional | CMOS I/O port P5_1 with bus write/byte control output WR1 or BC1, selectable by program. |
| 44 | P5_0 | bidirectional | CMOS I/O port P5_0 with bus write/byte control output WR0 or WR, selectable by program. |
| 45 | P4_7 | bidirectional | CMOS I/O port P4_7 with chip select CS0, address bit A23 and UART6 transmit/I2C data functions. |
| 46 | P4_6 | bidirectional | CMOS I/O port P4_6 with chip select CS1, address bit A22 and UART6 receive/I2C clock functions. |
| 47 | P4_5 | bidirectional | CMOS I/O port P4_5 with chip select CS2, address bit A21 and UART6 clock functions. |
| 48 | P4_4 | bidirectional | CMOS I/O port P4_4 with chip select CS3, address bit A20 and UART6 handshake/SS functions. |
| 49 | P4_3 | bidirectional | CMOS I/O port P4_3 with address bit A19, UART3 transmit/I2C data and Intelligent I/O group 2 / serial interface output functions. |
| 50 | P4_2 | bidirectional | CMOS I/O port P4_2 with address bit A18, UART3 receive/I2C clock and serial interface receive functions. |
| 51 | P4_1 | bidirectional | CMOS I/O port P4_1 with address bit A17 and UART3 clock functions. |
| 52 | P4_0 | bidirectional | CMOS I/O port P4_0 with address bit A16 and UART3 handshake/SS functions. |
| 53 | P3_7 | bidirectional | CMOS I/O port P3_7 with address bit A15 (multiplexed as A15/D15 on a 16-bit multiplexed bus), Timer A4 input and three-phase motor output U. |
| 54 | P3_6 | bidirectional | CMOS I/O port P3_6 with address bit A14 (multiplexed as A14/D14), Timer A4 output and three-phase motor output U. |
| 55 | P3_5 | bidirectional | CMOS I/O port P3_5 with address bit A13 (multiplexed as A13/D13), Timer A2 input and three-phase motor output W. |
| 56 | P3_4 | bidirectional | CMOS I/O port P3_4 with address bit A12 (multiplexed as A12/D12), Timer A2 output and three-phase motor output W. |
| 57 | P3_3 | bidirectional | CMOS I/O port P3_3 with address bit A11 (multiplexed as A11/D11), Timer A1 input and three-phase motor output V. |
| 58 | P3_2 | bidirectional | CMOS I/O port P3_2 with address bit A10 (multiplexed as A10/D10), Timer A1 output and three-phase motor output V. |
| 59 | P3_1 | bidirectional | CMOS I/O port P3_1 with address bit A9 (multiplexed as A9/D9), Timer A3 output and two-phase encoder input. |
| 60 | VCC2 | power_in | Power supply for the bus, port and serial/timer I/O pins; VCC1 and VCC2 must be 3.0 to 5.5 V with VCC1 ≥ VCC2. |
| 61 | P3_0 | bidirectional | CMOS I/O port P3_0 with address bit A8 (multiplexed as A8/D8), Timer A0 output and two-phase encoder input. |
| 62 | VSS | power_in | Ground pin; VSS = 0 V. |
| 63 | P2_7 | bidirectional | CMOS I/O port P2_7 with address bit A7 (multiplexed as A7/D7) and A/D converter analog input AN2_7. |
| 64 | P2_6 | bidirectional | CMOS I/O port P2_6 with address bit A6 (multiplexed as A6/D6) and A/D converter analog input AN2_6. |
| 65 | P2_5 | bidirectional | CMOS I/O port P2_5 with address bit A5 (multiplexed as A5/D5) and A/D converter analog input AN2_5. |
| 66 | P2_4 | bidirectional | CMOS I/O port P2_4 with address bit A4 (multiplexed as A4/D4) and A/D converter analog input AN2_4. |
| 67 | P2_3 | bidirectional | CMOS I/O port P2_3 with address bit A3 (multiplexed as A3/D3) and A/D converter analog input AN2_3. |
| 68 | P2_2 | bidirectional | CMOS I/O port P2_2 with address bit A2 (multiplexed as A2/D2) and A/D converter analog input AN2_2. |
| 69 | P2_1 | bidirectional | CMOS I/O port P2_1 with address bit A1 (multiplexed as A1/D1) and A/D converter analog input AN2_1. |
| 70 | P2_0 | bidirectional | CMOS I/O port P2_0 with address bit A0 (multiplexed as A0/D0), byte control BC0 (multiplexed as BC0/D0) and A/D converter analog input AN2_0. |
| 71 | P1_7 | bidirectional | CMOS I/O port P1_7 with data bit D15, external interrupt INT5 and Intelligent I/O group 0/1 functions. |
| 72 | P1_6 | bidirectional | CMOS I/O port P1_6 with data bit D14, external interrupt INT4 and Intelligent I/O group 0/1 functions. |
| 73 | P1_5 | bidirectional | CMOS I/O port P1_5 with data bit D13, external interrupt INT3 and Intelligent I/O group 0/1 functions. |
| 74 | P1_4 | bidirectional | CMOS I/O port P1_4 with data bit D12 and Intelligent I/O group 0/1 functions. |
| 75 | P1_3 | bidirectional | CMOS I/O port P1_3 with data bit D11 and Intelligent I/O group 0/1 functions. |
| 76 | P1_2 | bidirectional | CMOS I/O port P1_2 with data bit D10 and Intelligent I/O group 0/1 functions. |
| 77 | P1_1 | bidirectional | CMOS I/O port P1_1 with data bit D9 and Intelligent I/O group 0/1 functions. |
| 78 | P1_0 | bidirectional | CMOS I/O port P1_0 with data bit D8 and Intelligent I/O group 0/1 functions. |
| 79 | P0_7 | bidirectional | CMOS I/O port P0_7 with A/D converter analog input AN0_7 and data bit D7. |
| 80 | P0_6 | bidirectional | CMOS I/O port P0_6 with A/D converter analog input AN0_6 and data bit D6. |
| 81 | P0_5 | bidirectional | CMOS I/O port P0_5 with A/D converter analog input AN0_5 and data bit D5. |
| 82 | P0_4 | bidirectional | CMOS I/O port P0_4 with A/D converter analog input AN0_4 and data bit D4. |
| 83 | P0_3 | bidirectional | CMOS I/O port P0_3 with A/D converter analog input AN0_3 and data bit D3. |
| 84 | P0_2 | bidirectional | CMOS I/O port P0_2 with A/D converter analog input AN0_2 and data bit D2. |
| 85 | P0_1 | bidirectional | CMOS I/O port P0_1 with A/D converter analog input AN0_1 and data bit D1. |
| 86 | P0_0 | bidirectional | CMOS I/O port P0_0 with A/D converter analog input AN0_0 and data bit D0. |
| 87 | P10_7 | bidirectional | CMOS I/O port P10_7 with key input interrupt KI3 and A/D converter analog input AN_7. |
| 88 | P10_6 | bidirectional | CMOS I/O port P10_6 with key input interrupt KI2 and A/D converter analog input AN_6. |
| 89 | P10_5 | bidirectional | CMOS I/O port P10_5 with key input interrupt KI1 and A/D converter analog input AN_5. |
| 90 | P10_4 | bidirectional | CMOS I/O port P10_4 with key input interrupt KI0 and A/D converter analog input AN_4. |
| 91 | P10_3 | bidirectional | CMOS I/O port P10_3 with A/D converter analog input AN_3. |
| 92 | P10_2 | bidirectional | CMOS I/O port P10_2 with A/D converter analog input AN_2. |
| 93 | P10_1 | bidirectional | CMOS I/O port P10_1 with A/D converter analog input AN_1. |
| 94 | AVSS | power_in | Analog ground for the A/D converter; should be connected to VSS. |
| 95 | P10_0 | bidirectional | CMOS I/O port P10_0 with A/D converter analog input AN_0. |
| 96 | VREF | power_in | Reference voltage input for the A/D converter and D/A converter. |
| 97 | AVCC | power_in | Analog power supply for the A/D converter; should be connected to VCC1. |
| 98 | P9_7 | bidirectional | CMOS I/O port P9_7 with UART4 receive/I2C clock functions and external A/D converter trigger input ADTRG. |
| 99 | P9_6 | bidirectional | CMOS I/O port P9_6 with UART4 transmit/I2C data functions and expanded analog input ANEX1 for the A/D converter. |
| 100 | P9_5 | bidirectional | CMOS I/O port P9_5 with UART4 clock function and expanded analog I/O ANEX0 (A/D expanded input and external op-amp output). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC1, VCC2 | -0.3 | 6 | V | VCC1 = AVCC | 54 | |
| Supply voltage (VCC2) | VCC2 | -0.3 | V | 54 | |||
| Analog supply voltage | AVCC | -0.3 | 6 | V | VCC1 = AVCC | 54 | |
| Input voltage (XIN, RESET, CNVSS, NSD, VREF, P6_0 to P10_7) | VI | -0.3 | V | 54 | |||
| Input voltage (P0_0 to P5_7) | VI | -0.3 | V | 54 | |||
| Input voltage (P7_0, P7_1) | VI | -0.3 | 6 | V | 54 | ||
| Output voltage (XOUT, P6_0 to P10_7) | VO | -0.3 | V | 54 | |||
| Output voltage (P0_0 to P5_7) | VO | -0.3 | V | 54 | |||
| Output voltage (P7_0, P7_1) | VO | -0.3 | 6 | V | 54 | ||
| Power consumption | Pd | 500 | mW | Ta = 25°C | 54 | ||
| Operating temperature range | -40 | 85 | °C | 54 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 54 | ||
| Digital supply voltage | VCC1, VCC2 | 3 | 5 | 5.5 | V | 55 | |
| Operating temperature range (D version) | Topr | -40 | 85 | °C | 55 | ||
| Decoupling capacitance for voltage regulator | CVDC | 2.4 | 10 | µF | Inter-pin voltage: 1.5 V | 56 | |
| High level peak output current | IOH(peak) | -10 | mA | 57 | |||
| High level average output current | IOH(avg) | -5 | mA | Average value within 100 ms | 57 | ||
| Low level peak output current | IOL(peak) | 10 | mA | 57 | |||
| Low level average output current | IOL(avg) | 5 | mA | Average value within 100 ms | 57 | ||
| Main clock oscillator frequency | f(XIN) | 4 | 16 | MHz | 58 | ||
| Reference clock frequency | f(XRef) | 2 | 4 | MHz | 58 | ||
| PLL clock oscillator frequency | f(PLL) | 96 | 128 | MHz | 58 | ||
| Sub clock oscillator frequency | f(XCIN) | 32.768 | 62.5 | kHz | 58 | ||
| CPU operating frequency | f(CPU) | 50 | MHz | 58 | |||
| Peripheral bus clock operating frequency | f(BCLK) | 25 | MHz | 58 | |||
| Allowable ripple voltage | Vr(VCC1) | 0.5 | Vp-p | VCC1 = 5.0 V | 59 | ||
| Allowable ripple voltage | Vr(VCC1) | 0.3 | Vp-p | VCC1 = 3.0 V | 59 | ||
| RAM data retention voltage | VRDR | 2 | V | In stop mode | 60 | ||
| Data retention | 10 | Years | Ta = 55°C | 60 | |||
| Program/erase cycles, program area | 1000 | Cycles | 60 | ||||
| Program/erase cycles, data area | 10000 | Cycles | 60 | ||||
| Internal power supply start-up stabilization time after main power supply is turned on | td(P-R) | 2 | ms | 61 | |||
| Detected voltage error (low voltage detector) | Vdet | -0.3 | 0.3 | V | VCC1 = VCC2 = 4.2 to 5.5 V | 61 | |
| Self-consuming current (low voltage detector) | 4 | µA | VCC1 = 5.0 V, low voltage detector enabled | 61 | |||
| Operation start time of low voltage detector | td(E-A) | 150 | µs | 61 | |||
| PLL clock self-oscillation frequency | fSO(PLL) | 35 | 55 | 80 | MHz | 62 | |
| PLL lock time | tLOCK(PLL) | 1 | ms | 62 | |||
| On-chip oscillator frequency | f(OCO) | 62.5 | 125 | 250 | kHz | 62 | |
| Recovery time from wait mode to low power mode | trec(WAIT) | 225 | µs | 62 | |||
| Recovery time from stop mode | trec(STOP) | 225 | µs | 62 | |||
| Low level output voltage | VOL | 2 | V | IOL = 5 mA | 64 | ||
| Low level output voltage | VOL | 0.45 | V | IOL = 200 µA | 64 | ||
| Hysteresis (HOLD, RDY, NMI, INT0 to INT5, timer, UART, IIO and other inputs) | VT+ - VT- | 0.2 | 1 | V | 65 | ||
| Hysteresis (RESET) | VT+ - VT- | 0.2 | 1.8 | V | 65 | ||
| High level input current | IIH | 5 | µA | VI = 5 V | 65 | ||
| Low level input current | IIL | -5 | µA | VI = 0 V | 65 | ||
| Pull-up resistor | RPULLUP | 30 | 50 | 170 | kΩ | VI = 0 V | 65 |
| Power supply current | ICC | 32 | 45 | mA | f(CPU) = 50 MHz, f(BCLK) = 25 MHz, f(XIN) = 8 MHz, active: XIN, PLL | 66 | |
| Power supply current | ICC | 10 | mA | f(CPU) = fSO(PLL)/24 MHz, active: PLL (self-oscillation) | 66 | ||
| A/D absolute error | -3 | 3 | LSB | VREF = VCC1 = VCC2 = 5 V | 67 | ||
| A/D integral non-linearity error | INL | -3 | 3 | LSB | VREF = VCC1 = VCC2 = 5 V | 67 | |
| A/D differential non-linearity error | DNL | -1 | 1 | LSB | 67 | ||
| A/D offset error | -3 | 3 | LSB | 67 | |||
| A/D gain error | -3 | 3 | LSB | 67 | |||
| A/D resistor ladder | RLADDER | 4 | 20 | kΩ | VREF = VCC1 | 67 | |
| D/A absolute precision | 1 | % | 68 | ||||
| D/A reference input current | IVREF | 1.5 | mA | See Note 1 | 68 | ||
| D/A settling time | tS | 3 | µs | 68 |
CAD (KiCad official)
- Symbol:
R5F64112DFB#U0 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
r5f64112dfb-u0-etched.step/r5f64112dfb-u0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r5f64112dfb-u0.step/r5f64112dfb-u0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (102 pp, sha256
1d7a278cd9a26dd1, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).