3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownADR5040WARTZ-R7
Analog Devices · Voltage References · SOT-23-3
ADR5040WARTZ-R7 from Analog Devices, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V+ | power_in | Positive terminal of the shunt reference, connected to the supply through an external bias resistor; operating current range 50 µA to 15 mA. |
| 2 | V- | power_in | Negative terminal of the shunt reference (ground return) for the 2.048 V output. |
| 3 | T | passive | Pin 3 is recommended to be connected to V+. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-3 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage, Grade A | VOUT | 2.044 | 2.048 | 2.052 | V | IIN = 100 µA | 3 |
| Initial accuracy (Grade A) | VOERR | -4.096 | 4.096 | mV | IIN = 100 µA, Grade A | 3 | |
| Initial accuracy (Grade A) | VOERR | -0.2 | 0.2 | % | IIN = 100 µA, Grade A (±0.2 %) | 3 | |
| Temperature coefficient, Grade A | TCVOUT | 10 | 100 | ppm/°C | −40°C < TA < +125°C | 3 | |
| Output voltage change vs. IIN | ΔVR | 0.4 | 1.75 | mV | IIN = 50 µA to 1 mA, −40°C < TA < +125°C | 3 | |
| Output voltage change vs. IIN | ΔVR | 4 | 8 | mV | IIN = 1 mA to 15 mA, −40°C < TA < +125°C | 3 | |
| Minimum operating current | IIN | 50 | µA | TA = 25°C | 3 | ||
| Minimum operating current | IIN | 60 | µA | −40°C < TA < +125°C | 3 | ||
| Reverse current | 25 | mA | 6 | ||||
| Forward current | 20 | mA | 6 | ||||
| Storage temperature range | -65 | 150 | °C | 6 | |||
| Extended temperature range | -40 | 125 | °C | 6 | |||
| Junction temperature range | -65 | 150 | °C | 6 | |||
| Lead temperature (soldering) | 300 | °C | Soldering, 60 sec | 6 | |||
| Reverse operating current IIN | IIN | 50 | µA | Operating current range | 1 | ||
| Reverse operating current IIN | IIN | 15 | mA | Operating current range | 1 | ||
| Operating temperature range | TA | -40 | 125 | °C | Extended temperature range | 1 | |
| Thermal resistance, junction-to-ambient (RT-3) | θJA | 270 | °C/W | RT-3 package, surface-mount soldered in circuit board | 6 | ||
| Thermal resistance, junction-to-case (RT-3) | θJC | 102 | °C/W | RT-3 package | 6 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
ADR5040WARTZ-R7 - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0050000000000001 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
adr5040wartz-r7-etched.step/adr5040wartz-r7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adr5040wartz-r7.step/adr5040wartz-r7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (14 pp, sha256
9270161a9890b670, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).