3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTLVH431NAIDBZRR
Nexperia · Voltage References · TO-236AB
TLVH431NAIDBZRR from Nexperia, in a TO-236AB. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference input that sets the output voltage via an external resistor divider, with Vref of about 1.24 V (1228 to 1252 mV for A-grade at 25 °C) and a maximum reference current of 3 mA. |
| 2 | K | passive | Cathode of the shunt regulator, which sinks 0.08 mA to 70 mA and operates from Vref up to 14 V cathode-anode voltage. |
| 3 | A | power_in | Anode of the shunt regulator, normally connected to ground, and the soldering point used for thermal resistance Rth(j-sp) of 50 K/W max. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | TO-236AB |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference voltage | Vref | 1228 | 1240 | 1252 | mV | VKA = Vref; IK = 10 mA; Tamb = 25 °C | 6 |
| Reference voltage variation | ΔVref | 1.3 | 10 | mV | VKA = Vref; IK = 10 mA; Tamb = -40 °C to 85 °C | 6 | |
| Ref voltage variation to cathode-anode voltage variation ratio | ΔVref/ΔVKA | -0.5 | -2.7 | mV/V | IK = 10 mA; ΔVKA = Vref to 14 V | 6 | |
| Reference current | Iref | 0.19 | 0.3 | μA | IK = 10 mA; R1 = 10 kΩ; R2 = open | 6 | |
| Reference current variation | ΔIref | 0.06 | 0.16 | μA | IK = 10 mA; R1 = 10 kΩ; R2 = open; Tamb = -40 °C to 85 °C | 6 | |
| Minimum cathode current | IK(min) | 55 | 80 | μA | VKA = Vref | 6 | |
| Off-state current | Ioff | 0.01 | 0.05 | μA | VKA = 14 V; Vref = 0 | 6 | |
| Dynamic cathode-anode impedance | ZKA | 0.1 | 0.15 | Ω | IK = 0.1 mA to 70 mA; VKA = Vref; f < 1 kHz | 6 | |
| Cathode-anode voltage | VKA | 14 | V | 4 | |||
| Cathode current | IK | -25 | 80 | mA | 4 | ||
| Reference current | Iref | 3 | mA | 4 | |||
| Total power dissipation | Ptot | 350 | mW | Tamb ≤ 25 °C; FR4 PCB, standard footprint | 4 | ||
| Total power dissipation | Ptot | 580 | mW | Tamb ≤ 25 °C; FR4 PCB, mounting pad for anode 1 cm2 | 4 | ||
| Total power dissipation | Ptot | 950 | mW | Tamb ≤ 25 °C; ceramic PCB, Al2O3, standard footprint | 4 | ||
| Junction temperature | Tj | 150 | °C | 4 | |||
| Ambient temperature | Tamb | -40 | 85 | °C | TLVH431NXIDBZR | 4 | |
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Electrostatic discharge voltage, human body model | VESD | 4 | kV | MIL-STD-883 (human body model); Tamb = 25 °C | 4 | ||
| Electrostatic discharge voltage, machine model | VESD | 200 | V | machine model; Tamb = 25 °C | 4 | ||
| Cathode current | IK | 0.08 | 70 | mA | 5 | ||
| Thermal resistance from junction to ambient | Rth(j-a) | 360 | K/W | in free air; FR4 PCB, standard footprint | 5 | ||
| Thermal resistance from junction to ambient | Rth(j-a) | 216 | K/W | in free air; FR4 PCB, mounting pad for anode 1 cm2 | 5 | ||
| Thermal resistance from junction to ambient | Rth(j-a) | 132 | K/W | in free air; ceramic PCB, Al2O3, standard footprint | 5 | ||
| Thermal resistance from junction to solder point | Rth(j-sp) | 50 | K/W | in free air; soldering point of anode | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TLVH431NAIDBZRR - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: TO-236AB, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tlvh431naidbzrr-etched.step/tlvh431naidbzrr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlvh431naidbzrr.step/tlvh431naidbzrr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (17 pp, sha256
f697276a93043d84, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).