Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC12F615T-I

Microchip Tech · MICROCHIP · SOIC-8

PIC12F615T-I from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive supply pin; device voltage range is 2.0V-5.5V for PIC12F615.
2 GP5/T1CKI/P1A*/OSC1/CLKIN bidirectional General purpose I/O with programmable weak pull-up and interrupt-on-change; also Timer1 clock input, alternate P1A PWM output, crystal/resonator OSC1 connection and external clock/RC input CLKIN.
3 GP4/AN3/CIN1-/T1G/P1B*/OSC2/CLKOUT bidirectional General purpose I/O with programmable weak pull-up and interrupt-on-change; also A/D channel 3 input, comparator inverting input CIN1-, Timer1 gate, alternate P1B PWM output, crystal OSC2 and FOSC/4 CLKOUT.
4 GP3/T1G*/MCLR/VPP input Input-only pin with interrupt-on-change; functions as Master Clear (MCLR, with internal weak pull-up), alternate Timer1 gate, or high-voltage programming input VPP.
5 GP2/AN2/T0CKI/INT/COUT/CCP1/P1A bidirectional General purpose I/O with programmable weak pull-up and interrupt-on-change; also A/D channel 2 input, Timer0 clock input, external interrupt INT, comparator output COUT, and CCP1 capture/compare/PWM or P1A PWM output.
6 GP1/AN1/CIN0-/VREF/ICSPCLK bidirectional General purpose I/O with programmable weak pull-up and interrupt-on-change; also A/D channel 1 input, comparator inverting input CIN0-, external A/D voltage reference VREF and in-circuit serial programming clock ICSPCLK.
7 GP0/AN0/CIN+/P1B/ICSPDAT bidirectional General purpose I/O with programmable weak pull-up and interrupt-on-change; also A/D channel 0 input, comparator non-inverting input CIN+, P1B PWM output and in-circuit serial programming data ICSPDAT.
8 VSS power_in Ground reference pin.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Embedded Processors & Controllers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 2 5.5 V FOSC <= 4 MHz (D001); also <= 8 MHz (D001B) 145
Supply Voltage VDD 3 5.5 V FOSC <= 10 MHz (D001C) 145
Supply Voltage VDD 4.5 5.5 V FOSC <= 20 MHz (D001D) 145
RAM Data Retention Voltage VDR 1.5 V Device in Sleep mode 145
VDD Rise Rate for POR SVDD 0.05 V/ms See Section 12.3.1 145
Operating temperature (industrial) TA -40 85 °C Industrial 145
Ambient temperature under bias -40 125 °C 143
Storage temperature -65 150 °C 143
Voltage on VDD with respect to VSS VDD -0.3 6.5 V 143
Voltage on MCLR with respect to VSS -0.3 13.5 V 143
Voltage on all other pins with respect to VSS -0.3 V -0.3V to (VDD + 0.3V) 143
Maximum current out of VSS pin 95 mA 143
Maximum current into VDD pin 95 mA 143
Input clamp current IIK 20 mA VI < 0 or VI > VDD 143
Output clamp current IOK 20 mA Vo < 0 or Vo > VDD 143
Max output current sunk by any I/O pin 25 mA 143
Max output current sourced by any I/O pin 25 mA 143
Maximum current sunk by GPIO 90 mA 143
Maximum current sourced by GPIO 90 mA 143
Supply Current LP mode IDD 13 25 µA VDD=2.0V, FOSC=32 kHz LP 146
Supply Current LP mode IDD 32 51 µA VDD=5.0V, FOSC=32 kHz LP 146
Supply Current XT mode IDD 0.66 1 mA VDD=5.0V, FOSC=4 MHz XT 146
Supply Current INTOSC mode IDD 1.2 1.6 mA VDD=5.0V, FOSC=8 MHz INTOSC 146
Supply Current HS mode IDD 2.8 3.35 mA VDD=5.0V, FOSC=20 MHz HS 146
Power-down Base Current IPD 0.05 0.9 µA VDD=2.0V, WDT, BOR, Comparator, VREF and T1OSC disabled 148
Power-down Base Current IPD 0.15 1.2 µA VDD=3.0V, WDT, BOR, Comparator, VREF and T1OSC disabled 148
Power-down Base Current IPD 0.35 1.5 µA VDD=5.0V, WDT, BOR, Comparator, VREF and T1OSC disabled 148
WDT Current IPD 9.5 17 µA VDD=5.0V 148
BOR Current IPD 6 12 µA VDD=5.0V 148
Comparator Current IPD 60 75 µA VDD=5.0V, single comparator enabled 148
A/D Current IPD 0.36 1.9 µA VDD=5.0V, no conversion in progress 148
Input Low Voltage, TTL buffer VIL 0.8 V 4.5V <= VDD <= 5.5V 152
Input High Voltage, TTL buffer VIH 2 V 4.5V <= VDD <= 5.5V 152
Input Leakage Current I/O ports IIL 0.1 1 µA VSS <= VPIN <= VDD, pin at high-impedance 152
Input Leakage Current GP3/MCLR IIL 0.7 5 µA VSS <= VPIN <= VDD 152
Input Leakage Current OSC1 IIL 0.1 5 µA VSS <= VPIN <= VDD, XT, HS and LP oscillator configuration 152
GPIO Weak Pull-up Current IPUR 50 250 400 µA VDD = 5.0V, VPIN = VSS 152
Output Low Voltage I/O ports VOL 0.6 V IOL = 8.5 mA, VDD = 4.5V, -40°C to +85°C 152
Capacitive Loading OSC2 pin COSC2 15 pF In XT, HS and LP modes when external clock is used to drive OSC1 153
Capacitive Loading all I/O pins CIO 50 pF 153
Flash Characteristic Retention TRETD 40 Year Provided no other specifications are violated 153
VDD for Bulk Erase/Write VPEW 4.5 5.5 V 153
Erase/Write cycle time TPEW 2 2.5 ms 153
Thermal Resistance Junction to Ambient θJA 149.5 °C/W 8-pin SOIC package 154
Thermal Resistance Junction to Case θJC 39.9 °C/W 8-pin SOIC package 154
Die Temperature TDIE 150 °C 154
Internal Calibrated INTOSC Frequency 4 MHz INTOSC 3.96 4 4.04 MHz VDD = 3.5V, TA = 25°C 157
Internal Calibrated INTOSC Frequency 8 MHz INTOSC 7.92 8 8.08 MHz VDD = 3.5V, TA = 25°C 157
Internal Calibrated INTOSC Frequency 8 MHz INTOSC 7.6 8 8.4 MHz 2.0V <= VDD <= 5.5V, -40°C <= TA <= +85°C (Ind.) 157
MCLR Pulse Width (low) TMCL 2 µs VDD = 5V, -40°C to +85°C 160
Watchdog Timer Time-out Period (No Prescaler) TWDT 10 20 30 ms VDD = 5V, -40°C to +85°C 160
Power-up Timer Period TPWRT 40 65 140 ms 160
Brown-out Reset Voltage VBOR 2 2.15 2.3 V 160
Brown-out Reset Minimum Detection Period TBOR 100 µs VDD <= VBOR 160
Comparator Input Offset Voltage VOS -10 5 10 mV 162
Comparator Input Hysteresis Voltage VHYS 45 60 mV 162
VP6 voltage output VP6OUT 0.5 0.6 0.7 V 163
V1P2 voltage output V1P2OUT 1.05 1.2 1.35 V 163
ADC Offset Error EOFF 1.5 2 LSb VREF = 5.12V 164

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin SN = 8-lead Small Outline (150 mil) (SOIC) MS = Micro Small Outline (MSOP) 211

CAD (KiCad official)

  • Symbol: PIC12F615T-I
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: pic12f615t-i-etched.step / pic12f615t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic12f615t-i.step / pic12f615t-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (212 pp, sha256 85984a141d2e0e77, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF