Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAQ430GQE-AEC1-Z

Monolithic Power Systems · Position Sensor · QFN-16(3x3)

MAQ430GQE-AEC1-Z from Monolithic Power Systems, in a QFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 V power_in Motor commutation output (UVW).
2 A output Incremental (ABZ) output.
3 Z output Incremental (ABZ) output.
4 MOSI input SPI data in, with an internal pull-down resistor.
5 CS input SPI chip select, with an internal pull-up resistor.
6 B output Incremental (ABZ) output.
7 MISO tri_state SPI data out, with an internal pull-down resistor enabled at high impedance state.
8 GND power_in Supply ground.
9 W output Motor commutation output (UVW).
10 TEST input Test pin; connect to ground.
11 MGL output Digital output indicating field strength below MGLT level.
12 SCLK input SPI clock, with an internal pull-down resistor.
13 VDD power_in 3.3V supply input.
14 NC unconnected No connection; leave unconnected.
15 U output Motor commutation output (UVW).
16 MGH output Digital output indicating field strength above MGHT level.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package QFN-16(3x3)
Category Sensors
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD 3 3.3 3.6 V 4
Supply current IDD 10.2 11.7 13.8 mA From -40°C to +125°C 4
Operating temperature Top -40 125 °C 4
Applied magnetic field B 30 60 mT 4
Supply voltage (abs max) -0.5 4.6 V 3
Input pin voltage VI -0.5 6 V 3
Output pin voltage VO -0.5 4.6 V 3
Continuous power dissipation 2 W TA = +25°C 3
Junction temperature TJ 160 °C 3
Storage temperature -65 160 °C 3
Thermal resistance junction-ambient θJA 50 °C/W QFN-16 3x3, JESD51-7 4-layer PCB 3
Thermal resistance junction-case θJC 12 °C/W QFN-16 3x3, JESD51-7 4-layer PCB 3
Effective resolution 11 11.8 12.8 bit 3σ deviation of the noise distribution 5
Noise rms 0.01 0.02 0.03 deg 5
Refresh rate 850 980 1100 kHz 5
Power-up time 12 ms 5
Latency 8 10 µs Constant speed propagation delay 5
Filter cutoff frequency Fcutoff 390 Hz 5
INL at 25°C 0.7 deg At room temperature over the full field range 5
INL between -40°C to +125°C 1.1 deg Over the full temperature range and field range 5
INL at 150°C 1.16 deg Over the full field range 5
Temperature induced drift at room temperature 0.015 deg/°C 5
Temperature induced variation 25 to 85°C 0.5 deg From 25°C to 85°C 5
Temperature induced variation 25 to 125°C 1 deg From 25°C to 125°C 5
Magnetic field induced drift 0.005 deg/mT 5
ABZ update rate 16 MHz 5
ABZ resolution - edges per turn 4 1024 Programmable 5
Pulses per channel per turn PPT+1 1 256 Programmable 5
ABZ hysteresis H 0.7 deg 5
Overall ABZ jitter 0.3 deg Up to 60mT 5
UVW cycle per turn NPP 1 8 5
UVW hysteresis H 0.7 deg 5
UVW jitter (3σ) 0.1 0.3 deg 5
Magnetic field threshold accuracy 5 mT 6
Magnetic field threshold hysteresis MagHys 6 mT 6
Magnetic threshold temperature drift -600 ppm/°C 6
Input high voltage VIH 2.5 5.5 V 6
Input low voltage VIL -0.3 0.8 V 6
Output low voltage VOL 0.4 V IOL = 4mA 6
Output high voltage VOH 2.4 V IOH = 4mA 6
Pull-up resistor RPU 46 66 97 kΩ 6
Pull-down resistor RPD 43 55 97 kΩ 6
Rising edge slew rate TR 0.7 V/ns CL = 50pF 6
Falling edge slew rate TF 0.7 V/ns CL = 50pF 6
Idle time between angle transmissions tidleAngle 150 ns 12
Idle time around register readout tidleReg 750 ns 12
NVM update delay tnvm 20 ms 12
CS fall to SCLK fall tcsL 80 ns 12
SCLK period tsclk 40 ns 12
SCLK low level tsclkL 20 ns 12
SCLK high level tsclkH 20 ns 12
SCLK rise to CS rise tcsH 25 ns 12
SCLK edge to MISO valid tMISO 15 ns 12
MOSI valid to SCLK reading edge tMOSI 15 ns 12

CAD (KiCad official)

  • Symbol: MAQ430GQE-AEC1-Z
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16(3x3) (KiCad packages3D, STEP)
  • 3D model files: maq430gqe-aec1-z-etched.step / maq430gqe-aec1-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); maq430gqe-aec1-z.step / maq430gqe-aec1-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (30 pp, sha256 5655349186b74537, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF