3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS562219ADDFR
Texas Instruments · DC-DC Converters · TSOT-23-8
TPS562219ADDFR from Texas Instruments, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin; source terminal of low-side NFET and controller circuit reference. |
| 2 | SW | output | Switch node between high-side and low-side MOSFETs; requires 0.1µF bootstrap capacitor connection to VBST. |
| 3 | VIN | power_in | Input supply voltage pin (drain of high-side NFET); operating range 4.5V to 17V. |
| 4 | PG | tri_state | Open-drain power good output; high when output voltage within target ±10%, low when output below 65% of target. |
| 5 | SS | input | Soft-start control input; external capacitor must be connected to GND to control output ramp-up during startup. |
| 6 | VFB | input | Converter feedback input from output voltage divider; nominal threshold 765mV at 25°C with ±0.1µA input current. |
| 7 | EN | input | Enable input control (active high); high-level threshold 1.6V and low-level threshold 0.6V. |
| 8 | VBST | power_in | Bootstrap supply input for high-side NFET gate drive circuit; connect 0.1µF ceramic capacitor between VBST and SW. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range (VIN, EN) | VIN, EN | -0.3 | 19 | V | TJ = -40°C to 150°C | 4 | |
| Input voltage range (VBST) | VBST | -0.3 | 25 | V | TJ = -40°C to 150°C | 4 | |
| Input voltage range (VBST 10 ns transient) | VBST (10 ns transient) | -0.3 | 27.5 | V | TJ = -40°C to 150°C | 4 | |
| Input voltage range (VBST vs SW) | VBST (vs SW) | -0.3 | 6.5 | V | TJ = -40°C to 150°C | 4 | |
| Input voltage range (VFB, PG) | VFB, PG | -0.3 | 6.5 | V | TJ = -40°C to 150°C | 4 | |
| Input voltage range (SS) | SS | -0.3 | 5.5 | V | TJ = -40°C to 150°C | 4 | |
| Input voltage range (SW) | SW | -2 | 19 | V | TJ = -40°C to 150°C | 4 | |
| Input voltage range (SW 10 ns transient) | SW (10 ns transient) | -3.5 | 21 | V | TJ = -40°C to 150°C | 4 | |
| Operating junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 4 | ||
| Supply input voltage range | VIN | 4.5 | 17 | V | 4 | ||
| Input voltage range (VBST) | VI | -0.1 | 23 | V | VBST | 4 | |
| Input voltage range (VBST 10 ns transient) | VI | -0.1 | 26 | V | VBST, 10 ns transient | 4 | |
| Input voltage range (VBST vs SW) | VI | -0.1 | 6 | V | VBST(vs SW) | 4 | |
| Input voltage range (EN) | VI | -0.1 | 17 | V | EN | 4 | |
| Input voltage range (VFB, PG) | VI | -0.1 | 5.5 | V | VFB, PG | 4 | |
| Input voltage range (SS) | VI | -0.1 | 5 | V | SS | 4 | |
| Input voltage range (SW) | VI | -1.8 | 17 | V | SW | 4 | |
| Input voltage range (SW 10 ns transient) | VI | -3.5 | 20 | V | SW, 10 ns transient | 4 | |
| Operating free-air temperature | TA | -40 | 85 | °C | 4 | ||
| Operating – non-switching supply current | IVIN | 650 | 900 | µA | VIN current, TA = 25°C, EN = 5 V, VFB = 0.8 V | 5 | |
| Shutdown supply current | IVINSDN | 3 | 10 | µA | VIN current, TA = 25°C, EN = 0 V | 5 | |
| EN pin resistance to GND | REN | 225 | 450 | 900 | kΩ | VEN = 12 V | 5 |
| VFB threshold voltage | VFBTH | 757 | 765 | 773 | mV | TA = 25°C, VO = 1.05 V | 5 |
| VFB threshold voltage | VFBTH | 753 | 777 | mV | TA = 0°C to 85°C, VO = 1.05 V | 5 | |
| VFB threshold voltage | VFBTH | 751 | 779 | mV | TA = -40°C to 85°C, VO = 1.05 V | 5 | |
| VFB input current | IVFB | -0.1 | 0 | 0.1 | µA | VFB = 0.8V, TA = 25°C | 5 |
| Current limit (DC, L1 = 2.2 µH) | IOCL | 2.5 | 3.2 | 4.3 | A | DC current, VOUT = 1.05 V, L1 = 2.2 µH, TPS562219A | 5 |
| Soft-start charge current | ISS | 4.2 | 6 | 7.8 | µA | VSS = 1.2 V | 5 |
| PG threshold (VFB rising, Good) | VTHPG | 85 | 90 | 95 | % | VFB rising (Good) | 5 |
| PG sink current | IPG | 0.5 | 1 | mA | PG = 0.5 V | 5 | |
| UVLO threshold (wake-up VIN voltage) | UVLO | 3.45 | 3.75 | 4.05 | V | 5 | |
| UVLO hysteresis (VIN voltage) | 0.13 | 0.32 | 0.55 | V | 5 | ||
| Minimum off time | tOFF(MIN) | 260 | 310 | ns | TA = 25°C, VFB = 0.5 V | 5 | |
| EN high-level input voltage | VENH | 1.6 | V | EN | 5 | ||
| EN low-level input voltage | VENL | 0.6 | V | EN | 5 | ||
| High side switch resistance | RDS(on)h | 133 | mΩ | TA = 25°C, VBST – SW = 5.5 V, TPS562219A | 5 | ||
| Low side switch resistance | RDS(on)l | 80 | mΩ | TA = 25°C, TPS562219A | 5 | ||
| Thermal shutdown threshold | TSDN | 155 | °C | Shutdown temperature | 5 | ||
| Thermal shutdown hysteresis | 35 | °C | Hysteresis | 5 | |||
| PG threshold (VFB falling, Fault) | VTHPG | 85 | % | VFB falling (Fault) | 5 | ||
| Output OVP threshold | VOVP | 125 | %x Vfbth | OVP Detect | 5 | ||
| Output UVP threshold | VUVP | 65 | %x Vfbth | Hiccup detect | 5 | ||
| Hiccup power-on time | tHiccupOn | 1 | cycle | 5 | |||
| Hiccup power-off time | tHiccupOff | 7 | cycle | 5 | |||
| On time | tON | 150 | ns | VIN = 12 V, VO = 1.05 V | 5 | ||
| Junction-to-ambient thermal resistance (DDF 8-pin) | RθJA | 106.1 | °C/W | DDF (SOT) 8-pin package, TPS562219A | 4 | ||
| Junction-to-case (top) thermal resistance (DDF 8-pin) | RθJC(top) | 49.1 | °C/W | DDF (SOT) 8-pin package, TPS562219A | 4 | ||
| Junction-to-board thermal resistance (DDF 8-pin) | RθJB | 10.9 | °C/W | DDF (SOT) 8-pin package, TPS562219A | 4 | ||
| Junction-to-top characterization parameter (DDF 8-pin) | ψJT | 8.6 | °C/W | DDF (SOT) 8-pin package, TPS562219A | 4 | ||
| Junction-to-board characterization parameter (DDF 8-pin) | ψJB | 10.8 | °C/W | DDF (SOT) 8-pin package, TPS562219A | 4 |
CAD (KiCad official)
- Symbol:
TPS562219ADDFR - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
tps562219addfr-etched.step/tps562219addfr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps562219addfr.step/tps562219addfr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
a7b77680c2ce6538, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).