Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MIC2182-3.3YM

Microchip Tech · DC-DC Converters · SOP-16

MIC2182-3.3YM from Microchip Tech, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SS passive Soft-start pin: an external capacitor to ground slows the output rise, charged by an internal 5µA source toward VDD.
2 PWM input Low sets PWM-mode operation, and a 1nF capacitor to ground selects automatic PWM/skip-mode operation.
3 COMP output Internal error amplifier output that connects to a capacitor or series RC network to compensate the control loop.
4 SGND power_in Small-signal ground return, routed separately to the negative terminal of COUT.
5 SYNC input Optional oscillator sync input whose leading edge above threshold terminates the switching cycle; connect to SGND if unused.
6 EN/UVLO input Enable and accurate undervoltage lockout input; below the 2.5V threshold switching is disabled and below threshold the part enters micropower shutdown (<0.1µA).
7 VREF power_in 1.245V reference voltage output that requires a 0.1µF capacitor to ground.
8 CSH input Current-sense high input and noninverting current-limit comparator input, with a built-in 100mV offset from VOUT setting the current-limit threshold.
9 VOUT input Current-sense low and output voltage feedback input, serving as the inverting input for the current limit comparator and current sense amplifier.
10 VIN power_in Unregulated input supply, +4.5V to +32V.
11 VDD power_out 5V internal linear regulator output used as MOSFET gate drive supply and internal bus, bypassed to SGND with 4.7µF and able to supply up to 5mA external load.
12 PGND power_in MOSFET driver power ground return, connected to the synchronous MOSFET source and the negative terminal of CIN.
13 LSD output High-current low-side driver output for the external synchronous MOSFET, swinging between ground and VDD.
14 BST input Boost input providing high-side MOSFET drive voltage, higher than the input voltage by VDD minus a diode drop.
15 VSW passive Switch return for the high-side MOSFET driver.
16 HSD output High-current high-side driver output for the high-side MOSFET, swinging between ground and VIN + 5V minus the diode drop.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOP-16
Category Power Supply Chip
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage VOUT 3.267 3.3 3.333 V 4
Output Voltage VOUT 3.234 3.3 3.366 V 4
Output Voltage VOUT 3.201 3.3 3.399 V 4.5V < VIN < 32V, 0 < VCSH, VOUT < 75mV 4
PWM Mode Supply Current 1.6 2.5 mA VPWM = 0V, excluding external MOSFET gate drive current 4
Skip Mode Supply Current 600 1500 µA IL = 0mA, VPWM floating (1nF capacitor to ground) 4
Shutdown Quiescent Current 0.1 5 µA VEN/UVLO = 0V 4
Digital Supply Voltage (VDD) VDD 4.7 5.3 V IL = 0mA to 5mA 4
Reference Voltage VREF 1.22 1.245 1.27 V Fixed versions only 5
Enable Input Threshold 0.6 1.1 1.6 V 5
UVLO Threshold 2.2 2.5 2.8 V 5
Enable Input Current 0.1 5 µA VEN/UVLO = 5V 5
Soft-Start Current -3.5 -5 -6.5 µA VSS = 0V 5
Current-Limit Threshold Voltage 75 100 135 mV VCSH = VOUT 5
Oscillator Frequency 270 300 330 kHz 5
SYNC Threshold Level 0.7 1.3 1.9 V 5
SYNC Input Current 0.1 5 µA VSYNC = 5V 5
Frequency Foldback Threshold 0.75 0.95 1.15 V measured at VOUT pin 5
Output Driver Impedance (source) 5 8.5 Ω source 5
Output Driver Impedance (sink) 3.5 6 Ω sink 5
Minimum On-Time 140 250 ns VOUT = VOUT(nominal) + 200mV 5
Analog Supply Voltage (VIN) VIN 34 V 4
Digital Supply Voltage (VDD) VDD 7 V 4
Sense Voltage (VOUT, CSH) -0.3 7 V 4
Sync Pin Voltage (VSYNC) VSYNC -0.3 7 V 4
Power Dissipation (PD) SOP PD 400 mW @ TA = 85°C 4
Ambient Storage Temperature (TS) TS -65 150 °C 4
Analog Supply Voltage (VIN) VIN 4.5 32 V 4
Ambient Temperature (TA) TA -40 85 °C 4
Junction Temperature (TJ) TJ -40 125 °C 4
Package Thermal Resistance SOP θJA 100 °C/W 4
Output Voltage Total Regulation 0.8 % 0mV < (VCSH, VOUT) < 75mV (full load range), 4.5V < VIN < 32V 4
Output Voltage Line Regulation 0.03 %/V VIN = 4.5V to 32V, VCSH, VOUT = 50mV 4
Output Voltage Load Regulation 0.5 % 25mV < (VCSH, VOUT) < 75mV (PWM mode only) 4
Digital Supply Undervoltage Lockout VDD upper threshold (turn on) VDD 4.2 V 4
Digital Supply Undervoltage Lockout VDD lower threshold (turn off) VDD 4.1 V 4
Reference Line Regulation VREF 1 mV 6V < VIN < 32V 5
Reference Load Regulation VREF 2 mV 0µA < IREF < 100µA 5
Current Sense Amplifier Gain 2 5
Error Sense Amplifier Gain 20 5
Maximum Duty Cycle 86 % 5
SYNC Minimum Pulse Width 200 ns 5
SYNC Capture Range 330 kHz 5
Foldback Frequency 60 kHz 5
Rise/Fall Time 60 ns CL = 3000pF 5
Driver Nonoverlap Time 80 ns 5
PWM Input Current -10 µA VPWM = 0V 5

CAD (KiCad official)

  • Symbol: MIC2182-3.3YM
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOP-16 (KiCad packages3D, STEP)
  • 3D model files: mic2182-3-3ym-etched.step / mic2182-3-3ym-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic2182-3-3ym.step / mic2182-3-3ym.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (28 pp, sha256 787436724457805c, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF