Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NCV8161ASN300T1G

onsemi · Linear Voltage Regulators (LDO) · TSOP-5

NCV8161ASN300T1G from onsemi, in a TSOP-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input voltage supply pin; the datasheet gives the operating input voltage range as 1.9 V to 5.5 V.
2 GND power_in Common ground connection.
3 EN input Chip enable: applying VEN < 0.4 V disables the regulator, and pulling VEN > 1.2 V enables the LDO.
4 N/C unconnected Not connected; this pin can be tied to ground to improve thermal dissipation.
5 OUT power_out Regulated output voltage; the output should be bypassed with a small 1 µF ceramic capacitor.

Key specifications

Parameter Value
Manufacturer onsemi
Package TSOP-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Input Voltage VIN 1.9 5.5 V 4
Output Voltage Accuracy VOUT -2 2 % −40°C ≤ TJ ≤ 125°C 4
Load Regulation (TSOP-5) LoadReg 0.005 0.008 %/mA IOUT = 1 mA to 450 mA, TSOP-5 4
Dropout Voltage (TSOP-5, VOUT(NOM) = 3.0 V) VDO 240 330 mV IOUT = 450 mA (TSOP-5), VOUT(NOM) = 3.0 V 4
Output Current Limit ICL 450 700 mA VOUT = 90% VOUT(NOM) 4
Quiescent Current IQ 18 23 µA IOUT = 0 mA 4
Shutdown Current IDIS 0.01 1 µA VEN ≤ 0.4 V, VIN = 4.8 V 4
EN Input Voltage High VENH 1.2 V 4
EN Input Voltage Low VENL 0.4 V 4
EN Pull Down Current IEN 0.2 0.5 µA VEN = 4.8 V 4
Line Transient (step up) TranLINE -1 mV VIN = (VOUT(NOM) + 1 V) to (VOUT(NOM) + 1.6 V) in 30 µs, IOUT = 1 mA 4
Line Transient (step down) TranLINE 1 mV VIN = (VOUT(NOM) + 1.6 V) to (VOUT(NOM) + 1 V) in 30 µs, IOUT = 1 mA 4
Load Transient (1 mA to 450 mA) TranLOAD -40 mV IOUT = 1 mA to 450 mA in 10 µs 4
Load Transient (450 mA to 1 mA) TranLOAD 40 mV IOUT = 450 mA to 1 mA in 10 µs 4
Input Voltage VIN -0.3 6 V Note 1 3
Output Voltage VOUT -0.3 6 V Range −0.3 to VIN + 0.3, max 6 V 3
Chip Enable Input VCE -0.3 6 V Range −0.3 to VIN + 0.3, max 6 V 3
Operating Ambient Temperature Range TA -40 125 °C 3
Maximum Junction Temperature TJ 150 °C 3
Storage Temperature Range TSTG -55 150 °C 3
ESD Capability, Human Body Model ESDHBM 2000 V Per EIA/JESD22-A114 3
ESD Capability, Machine Model ESDMM 200 V Per EIA/JESD22-A115 3
Input Voltage (recommended) VIN 1.9 5.5 V 3
Junction Temperature (recommended) TJ -40 125 °C 3
Thermal Resistance, Junction-to-Air (TSOP-5) RJA 218 °C/W TSOP-5, measured per JEDEC board specification (JESD51-7) 3

CAD (KiCad official)

  • Symbol: NCV8161ASN300T1G
  • Footprint: Package_SO:TSOP-5_1.65x3.05mm_P0.95mm
  • 3D model: TSOP-5 (KiCad packages3D, STEP)
  • 3D model files: ncv8161asn300t1g-etched.step / ncv8161asn300t1g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncv8161asn300t1g.step / ncv8161asn300t1g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (17 pp, sha256 e28224520972c0e7, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF