3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTM4C1294NCPDTI3R
Texas Instruments · Global Sourcing Parts · TQFP-128(14x14)
TM4C1294NCPDTI3R from Texas Instruments, in a TQFP-128(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PD0 | bidirectional | GPIO port D bit 0, with alternate functions AIN15, C0o, I2C7SCL, SSI2XDAT1 and T0CCP0. |
| 2 | PD1 | bidirectional | GPIO port D bit 1, with alternate functions AIN14, C1o, I2C7SDA, SSI2XDAT0 and T0CCP1. |
| 3 | PD2 | bidirectional | GPIO port D bit 2, with alternate functions AIN13, C2o, I2C8SCL, SSI2Fss and T1CCP0. |
| 4 | PD3 | bidirectional | GPIO port D bit 3, with alternate functions AIN12, I2C8SDA, SSI2Clk and T1CCP1. |
| 5 | PQ0 | bidirectional | GPIO port Q bit 0, with alternate functions EPI0S20 and SSI3Clk. |
| 6 | PQ1 | bidirectional | GPIO port Q bit 1, with alternate functions EPI0S21 and SSI3Fss. |
| 7 | VDD | power_in | Positive supply for I/O and some logic. |
| 8 | VDDA | power_in | Positive supply for the analog circuits (ADC, analog comparators, etc.), separate from VDD to minimize noise on the analog functions. |
| 9 | VREFA+ | input | ADC reference voltage, used with GNDA, that sets the voltage at which an AINn input converts to 4095 (4095 = full scale). |
| 10 | GNDA | power_in | Ground reference for the analog circuits. |
| 11 | PQ2 | bidirectional | GPIO port Q bit 2, with alternate functions EPI0S22 and SSI3XDAT0. |
| 12 | PE3 | bidirectional | GPIO port E bit 3, with alternate functions AIN0 and U1DTR. |
| 13 | PE2 | bidirectional | GPIO port E bit 2, with alternate functions AIN1 and U1DCD. |
| 14 | PE1 | bidirectional | GPIO port E bit 1, with alternate functions AIN2 and U1DSR. |
| 15 | PE0 | bidirectional | GPIO port E bit 0, with alternate functions AIN3 and U1RTS. |
| 16 | VDD | power_in | Positive supply for I/O and some logic. |
| 17 | GND | power_in | Ground reference for the digital supply. |
| 18 | PK0 | bidirectional | GPIO port K bit 0, with alternate functions AIN16, EPI0S0 and U4Rx. |
| 19 | PK1 | bidirectional | GPIO port K bit 1, with alternate functions AIN17, EPI0S1 and U4Tx. |
| 20 | PK2 | bidirectional | GPIO port K bit 2, with alternate functions AIN18, EPI0S2 and U4RTS. |
| 21 | PK3 | bidirectional | GPIO port K bit 3, with alternate functions AIN19, EPI0S3 and U4CTS. |
| 22 | PC7 | bidirectional | GPIO port C bit 7, with alternate functions EPI0S4, U5Tx and C0-. |
| 23 | PC6 | bidirectional | GPIO port C bit 6, with alternate functions EPI0S5, U5Rx and C0+. |
| 24 | PC5 | bidirectional | GPIO port C bit 5, with alternate functions EPI0S6, U7Tx, C1+ and RTCCLK. |
| 25 | PC4 | bidirectional | GPIO port C bit 4, with alternate functions EPI0S7, U7Rx and C1-. |
| 26 | VDD | power_in | Positive supply for I/O and some logic. |
| 27 | PQ3 | bidirectional | GPIO port Q bit 3, with alternate functions EPI0S23 and SSI3XDAT1. |
| 28 | VDD | power_in | Positive supply for I/O and some logic. |
| 29 | PH0 | bidirectional | GPIO port H bit 0, with alternate functions EPI0S0 and U0RTS. |
| 30 | PH1 | bidirectional | GPIO port H bit 1, with alternate functions EPI0S1 and U0CTS. |
| 31 | PH2 | bidirectional | GPIO port H bit 2, with alternate functions EPI0S2 and U0DCD. |
| 32 | PH3 | bidirectional | GPIO port H bit 3, with alternate functions EPI0S3 and U0DSR. |
| 33 | PA0 | bidirectional | GPIO port A bit 0, with alternate functions U0Rx, I2C9SCL, T0CCP0 and CAN0Rx. |
| 34 | PA1 | bidirectional | GPIO port A bit 1, with alternate functions U0Tx, I2C9SDA, T0CCP1 and CAN0Tx. |
| 35 | PA2 | bidirectional | GPIO port A bit 2, with alternate functions SSI0Clk, I2C8SCL, T1CCP0 and U4Rx. |
| 36 | PA3 | bidirectional | GPIO port A bit 3, with alternate functions SSI0Fss, I2C8SDA, T1CCP1 and U4Tx. |
| 37 | PA4 | bidirectional | GPIO port A bit 4, with alternate functions SSI0XDAT0, I2C7SCL, T2CCP0 and U3Rx. |
| 38 | PA5 | bidirectional | GPIO port A bit 5, with alternate functions SSI0XDAT1, I2C7SDA, T2CCP1 and U3Tx. |
| 39 | VDD | power_in | Positive supply for I/O and some logic. |
| 40 | PA6 | bidirectional | GPIO port A bit 6, with alternate functions SSI0XDAT2, I2C6SCL, T3CCP0, U2Rx, EPI0S8 and USB0EPEN. |
| 41 | PA7 | bidirectional | GPIO port A bit 7, with alternate functions SSI0XDAT3, I2C6SDA, T3CCP1, U2Tx, EPI0S9, USB0EPEN and USB0PFLT. |
| 42 | PF0 | bidirectional | GPIO port F bit 0, with alternate functions M0PWM0, SSI3XDAT1 and EN0LED0. |
| 43 | PF1 | bidirectional | GPIO port F bit 1, with alternate functions M0PWM1, SSI3XDAT0 and EN0LED2. |
| 44 | PF2 | bidirectional | GPIO port F bit 2, with alternate functions M0PWM2 and SSI3Fss. |
| 45 | PF3 | bidirectional | GPIO port F bit 3, with alternate functions M0PWM3 and SSI3Clk. |
| 46 | PF4 | bidirectional | GPIO port F bit 4, with alternate functions M0FAULT0, SSI3XDAT2 and EN0LED1. |
| 47 | VDD | power_in | Positive supply for I/O and some logic. |
| 48 | GND | power_in | Ground reference for the digital supply. |
| 49 | PG0 | bidirectional | GPIO port G bit 0, with alternate functions EPI0S11, I2C1SCL, M0PWM4 and EN0PPS. |
| 50 | PG1 | bidirectional | GPIO port G bit 1, with alternate functions EPI0S10, I2C1SDA and M0PWM5. |
| 51 | VDD | power_in | Positive supply for I/O and some logic. |
| 52 | VDD | power_in | Positive supply for I/O and some logic. |
| 53 | EN0RXIN | bidirectional | Ethernet PHY negative receive differential input, with a fixed pin assignment. |
| 54 | EN0RXIP | bidirectional | Ethernet PHY positive receive differential input, with a fixed pin assignment. |
| 55 | GND | power_in | Ground reference for the digital supply. |
| 56 | EN0TXON | bidirectional | Ethernet PHY negative transmit differential output, with a fixed pin assignment. |
| 57 | EN0TXOP | bidirectional | Ethernet PHY positive transmit differential output, with a fixed pin assignment. |
| 58 | GND | power_in | Ground reference for the digital supply. |
| 59 | RBIAS | passive | Connects a 4.87-kOhm (1% precision) resistor for the Ethernet PHY. |
| 60 | PK7 | bidirectional | GPIO port K bit 7, with alternate functions EPI0S24, I2C4SDA, M0FAULT2, U0RI and RTCCLK. |
| 61 | PK6 | bidirectional | GPIO port K bit 6, with alternate functions EPI0S25, I2C4SCL, M0FAULT1 and EN0LED1. |
| 62 | PK5 | bidirectional | GPIO port K bit 5, with alternate functions EPI0S31, I2C3SDA, M0PWM7 and EN0LED2. |
| 63 | PK4 | bidirectional | GPIO port K bit 4, with alternate functions EPI0S32, I2C3SCL, M0PWM6 and EN0LED0. |
| 64 | WAKE | input | External input that brings the processor out of Hibernate mode when asserted. |
| 65 | HIB | output | Output that indicates the processor is in Hibernate mode. |
| 66 | XOSC0 | input | Hibernation module oscillator crystal input or external 32.768-kHz clock reference input. |
| 67 | XOSC1 | output | Hibernation module oscillator crystal output; leave unconnected when using a single-ended clock source. |
| 68 | VBAT | power_in | Power source for the Hibernation module, normally connected to the positive terminal of a battery as the backup supply. |
| 69 | VDD | power_in | Positive supply for I/O and some logic. |
| 70 | RST | input | System reset input. |
| 71 | PM7 | bidirectional | GPIO port M bit 7, with alternate functions TMPR0, T5CCP1 and U0RI. |
| 72 | PM6 | bidirectional | GPIO port M bit 6, with alternate functions TMPR1, T5CCP0 and U0DSR. |
| 73 | PM5 | bidirectional | GPIO port M bit 5, with alternate functions TMPR2, T4CCP1 and U0DCD. |
| 74 | PM4 | bidirectional | GPIO port M bit 4, with alternate functions TMPR3, T4CCP0 and U0CTS. |
| 75 | PM3 | bidirectional | GPIO port M bit 3, with alternate functions EPI0S12 and T3CCP1. |
| 76 | PM2 | bidirectional | GPIO port M bit 2, with alternate functions EPI0S13 and T3CCP0. |
| 77 | PM1 | bidirectional | GPIO port M bit 1, with alternate functions EPI0S14 and T2CCP1. |
| 78 | PM0 | bidirectional | GPIO port M bit 0, with alternate functions EPI0S15 and T2CCP0. |
| 79 | VDD | power_in | Positive supply for I/O and some logic. |
| 80 | GND | power_in | Ground reference for the digital supply. |
| 81 | PL0 | bidirectional | GPIO port L bit 0, with alternate functions EPI0S16, USB0D0, I2C2SDA and M0FAULT3. |
| 82 | PL1 | bidirectional | GPIO port L bit 1, with alternate functions EPI0S17, USB0D1, I2C2SCL and PhA0. |
| 83 | PL2 | bidirectional | GPIO port L bit 2, with alternate functions EPI0S18, USB0D2, C0o and PhB0. |
| 84 | PL3 | bidirectional | GPIO port L bit 3, with alternate functions EPI0S19, USB0D3, C1o and IDX0. |
| 85 | PL4 | bidirectional | GPIO port L bit 4, with alternate functions EPI0S26, USB0D4 and T0CCP0. |
| 86 | PL5 | bidirectional | GPIO port L bit 5, with alternate functions EPI0S33, USB0D5 and T0CCP1. |
| 87 | VDDC | passive | VDDC pin shown on the pin diagram; its function is not described in the supplied text. |
| 88 | OSC0 | input | Main oscillator crystal input or external clock reference input. |
| 89 | OSC1 | output | Main oscillator crystal output; leave unconnected when using a single-ended clock source. |
| 90 | VDD | power_in | Positive supply for I/O and some logic. |
| 91 | PB2 | bidirectional | GPIO port B bit 2, with alternate functions I2C0SCL, EPI0S27, USB0STP and T5CCP0. |
| 92 | PB3 | bidirectional | GPIO port B bit 3, with alternate functions I2C0SDA, EPI0S28, USB0CLK and T5CCP1. |
| 93 | PL7 | bidirectional | GPIO port L bit 7, with alternate functions USB0DM and T1CCP1; fast GPIO pad with 4-mA drive only. |
| 94 | PL6 | bidirectional | GPIO port L bit 6, with alternate functions USB0DP and T1CCP0; fast GPIO pad with 4-mA drive only. |
| 95 | PB0 | bidirectional | GPIO port B bit 0, with alternate functions USB0ID, U1Rx, CAN1Rx, T4CCP0 and I2C5SCL. |
| 96 | PB1 | bidirectional | GPIO port B bit 1, with alternate functions USB0VBUS (5-V tolerant), U1Tx, CAN1Tx, T4CCP1 and I2C5SDA. |
| 97 | PC3/TDO/SWO | bidirectional | GPIO port C bit 3, which resets to the JTAG TDO and SWO function. |
| 98 | PC2/TDI | bidirectional | GPIO port C bit 2, which resets to the JTAG TDI input function. |
| 99 | PC1/TMS/SWDIO | bidirectional | GPIO port C bit 1, which resets to the JTAG TMS and SWDIO function. |
| 100 | PC0/TCK/SWCLK | bidirectional | GPIO port C bit 0, which resets to the JTAG/SWD clock input function. |
| 101 | VDD | power_in | Positive supply for I/O and some logic. |
| 102 | PQ4 | bidirectional | GPIO port Q bit 4, with alternate functions DIVSCLK and U1Rx. |
| 103 | PP2 | bidirectional | GPIO port P bit 2, with alternate functions EPI0S29, U0DTR and USB0NXT. |
| 104 | PP3 | bidirectional | GPIO port P bit 3, with alternate functions EPI0S30, U1CTS, U0DCD, USB0DIR and RTCCLK. |
| 105 | PP4 | bidirectional | GPIO port P bit 4, with alternate functions U3RTS, U0DSR and USB0D7. |
| 106 | PP5 | bidirectional | GPIO port P bit 5, with alternate functions U3CTS, I2C2SCL and USB0D6. |
| 107 | PN0 | bidirectional | GPIO port N bit 0, with alternate function U1RTS. |
| 108 | PN1 | bidirectional | GPIO port N bit 1, with alternate function U1CTS. |
| 109 | PN2 | bidirectional | GPIO port N bit 2, with alternate functions U1DCD, U2RTS and EPI0S29. |
| 110 | PN3 | bidirectional | GPIO port N bit 3, with alternate functions U1DSR, U2CTS and EPI0S30. |
| 111 | PN4 | bidirectional | GPIO port N bit 4, with alternate functions U1DTR, U3RTS, I2C2SDA and EPI0S34. |
| 112 | PN5 | bidirectional | GPIO port N bit 5, with alternate functions U1RI, U3CTS, I2C2SCL and EPI0S35. |
| 113 | VDD | power_in | Positive supply for I/O and some logic. |
| 114 | GND | power_in | Ground reference for the digital supply. |
| 115 | VDDC | passive | VDDC pin shown on the pin diagram; its function is not described in the supplied text. |
| 116 | PJ0 | bidirectional | GPIO port J bit 0, with alternate functions U3Rx and EN0PPS. |
| 117 | PJ1 | bidirectional | GPIO port J bit 1, with alternate function U3Tx. |
| 118 | PP0 | bidirectional | GPIO port P bit 0, with alternate functions C2+, U6Rx and SSI3XDAT2. |
| 119 | PP1 | bidirectional | GPIO port P bit 1, with alternate functions C2-, U6Tx and SSI3XDAT3. |
| 120 | PB5 | bidirectional | GPIO port B bit 5, with alternate functions AIN11, I2C5SDA, SSI1Clk and U0RTS. |
| 121 | PB4 | bidirectional | GPIO port B bit 4, with alternate functions AIN10, I2C5SCL, SSI1Fss and U0CTS. |
| 122 | VDD | power_in | Positive supply for I/O and some logic. |
| 123 | PE4 | bidirectional | GPIO port E bit 4, with alternate functions AIN9, SSI1XDAT0 and U1RI. |
| 124 | PE5 | bidirectional | GPIO port E bit 5, with alternate functions AIN8 and SSI1XDAT1. |
| 125 | PD4 | bidirectional | GPIO port D bit 4, with alternate functions AIN7, SSI1XDAT2, U2Rx and T3CCP0. |
| 126 | PD5 | bidirectional | GPIO port D bit 5, with alternate functions AIN6, SSI1XDAT3, U2Tx and T3CCP1. |
| 127 | PD6 | bidirectional | GPIO port D bit 6, with alternate functions AIN5, SSI2XDAT3, U2RTS, T4CCP0 and USB0EPEN. |
| 128 | PD7 | bidirectional | GPIO port D bit 7, with alternate functions AIN4, SSI2XDAT2, U2CTS, T4CCP1, NMI and USB0PFLT; locked by default and needs commit control to reprogram. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TQFP-128(14x14) |
| Category | Global Sourcing Parts |
| Pins | 128 |
CAD (KiCad official)
- Symbol:
TM4C1294NCPDTI3R - Footprint:
Package_QFP:TQFP-128_14x14mm_P0.4mm - 3D model: TQFP-128(14x14) (KiCad packages3D, STEP)
- 3D model files:
tm4c1294ncpdti3r-etched.step/tm4c1294ncpdti3r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tm4c1294ncpdti3r.step/tm4c1294ncpdti3r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (1893 pp, sha256
41e70b4470c9272f, retrieved 2026-11-16, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).