Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

X9313WSZ

RENESAS · Digital Potentiometers · SOIC-8

X9313WSZ from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INC input Increment control input, negative-edge triggered; toggling it moves the wiper up or down per the U/D level.
2 U/D input Up/Down control input that sets the wiper movement direction (counter increment or decrement).
3 RH/VH passive High terminal of the resistor array, equivalent to a fixed terminal of a mechanical potentiometer, with voltage range -VCC to +VCC.
4 VSS power_in Ground.
5 RW/VW passive Wiper terminal, equivalent to the movable terminal of a mechanical potentiometer, with typical wiper resistance of 40 ohms at VCC = 5V.
6 RL/VL passive Low terminal of the resistor array, equivalent to a fixed terminal of a mechanical potentiometer, with voltage range -VCC to +VCC.
7 CS input Chip Select control input, active LOW; wiper position is stored in nonvolatile memory when CS returns HIGH while INC is HIGH.
8 VCC power_in Supply voltage, 5V ±10% for X9313 (3V to 5.5V for -3 versions).

Key specifications

Parameter Value
Manufacturer RENESAS
Package SOIC-8
Category Data Converters
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
End-to-end Resistance Tolerance -20 20 % 5
Wiper Resistance RW 40 100 Ω IW = (VH - VL)/RTOTAL, VCC = 5V 5
Wiper Current IW -4.4 4.4 mA 5
Absolute Linearity -1 1 MI RW(n)(actual) - RW(n)(expected) 5
Relative Linearity -0.2 0.2 MI RW(n+1) - (RW(n)+MI) 5
RTOTAL Temperature Coefficient -300 300 ppm/°C 5
Ratiometric Temperature Coefficient -20 20 ppm/°C 5
VCC Active Current ISB 1 3 mA CS = VIL, U/D = VIL or VIH and INC = 0.42/2.4V @ max tCYC 6
Standby Supply Current 200 500 µA CS = VCC - 0.3V, U/D and INC = VSS or VCC - 0.3V 6
Input Leakage Current ILI -10 10 µA VIN = VSS to VCC 6
Input HIGH level VIH 2 V CS, INC, U/D 6
Input LOW level VIL 0.8 V CS, INC, U/D 6
Input Capacitance CIN 10 pF VCC = 5V, VIN = VSS, TA = +25°C, f = 1MHz 6
Minimum endurance 100000 data changes per bit per register 6
Data retention 100 years 6
CS to INC Setup tCI 100 ns 7
INC HIGH to U/D Change tID 100 ns 7
U/D to INC Setup tDI 2.9 µs 7
INC LOW Period tIL 1 µs 7
INC HIGH Period tIH 1 µs 7
INC Inactive to CS Inactive tIC 1 µs 7
CS Deselect Time (STORE) tCPH 20 ms STORE 7
CS Deselect Time (NO STORE) tCPH 100 ns NO STORE 7
INC to VW Change tIW 5 µs 7
INC Cycle Time tCYC 2 µs 7
INC Input Rise and Fall Time tR, tF 500 µs 7
Power-up to Wiper Stable tPU 10 µs 7
VCC Power-up Rate tR VCC 0.2 50 V/ms 7
Store Cycle tWR 10 ms 7
Temperature Under Bias -65 135 °C 5
Storage Temperature -65 150 °C 5
Voltage on CS, INC, U/D and VCC -1 7 V with respect to VSS 5
Voltage on VH, VL, VW -6 7 V with respect to VSS 5
/VH - VL/ V 10 V X9313W 5
Wiper current IW -8.8 8.8 mA 10s 5
ESD Human Body Model 2 kV 5
ESD Machine Model 200 V 5
Operating Temperature Commercial 0 70 °C Commercial 5
Max Wiper current -4.4 4.4 mA 5
Power rating 10 mW RTOTAL ≥ 10k 5
Total resistance RTOTAL 10 kΩ X9313W 2
Noise -120 dBV Ref: 1kHz 5
Resolution 3 % 5
Potentiometer Capacitance CH CH 10 pF See Circuit #3 5
Potentiometer Capacitance CL CL 10 pF See Circuit #3 5
Potentiometer Capacitance CW CW 25 pF See Circuit #3 5

CAD (KiCad official)

  • Symbol: X9313WSZ
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: x9313wsz-etched.step / x9313wsz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); x9313wsz.step / x9313wsz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (12 pp, sha256 b39b345eb958271f, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF