3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC16F526-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · PDIP-14
PIC16F526-I from Microchip Tech, in a PDIP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply for logic and I/O pins, 2.0V to 5.5V operating range. |
| 2 | RB5/OSC1/CLKIN | bidirectional | Bidirectional I/O pin RB5, also oscillator crystal input (OSC1) or external clock source input (CLKIN, Schmitt Trigger). |
| 3 | RB4/OSC2/CLKOUT | bidirectional | Bidirectional I/O pin RB4 with weak pull-up and wake-up on change, also crystal output (OSC2) or CLKOUT (FOSC/4) in EXTRC/INTRC modes. |
| 4 | RB3/MCLR/VPP | input | Input-only pin RB3 with weak pull-up and wake-up on change, or active-low Master Clear (Reset); also programming voltage input VPP, which must not exceed VDD during normal operation. |
| 5 | RC5/T0CKI | bidirectional | Bidirectional I/O port pin RC5, also Timer0 Schmitt Trigger clock input T0CKI. |
| 6 | RC4/C2OUT | bidirectional | Bidirectional I/O port pin RC4, also Comparator 2 output (C2OUT). |
| 7 | RC3 | bidirectional | Bidirectional I/O port pin RC3. |
| 8 | RC2/CVREF | bidirectional | Bidirectional I/O port pin RC2, also programmable voltage reference output (CVREF). |
| 9 | RC1/C2IN- | bidirectional | Bidirectional I/O port pin RC1, also Comparator 2 inverting input (C2IN-). |
| 10 | RC0/C2IN+ | bidirectional | Bidirectional I/O port pin RC0, also Comparator 2 non-inverting input (C2IN+). |
| 11 | RB2/C1OUT/AN2 | bidirectional | Bidirectional I/O pin RB2, also Comparator 1 output (C1OUT) or ADC channel 2 input (AN2). |
| 12 | RB1/C1IN-/AN1/ICSPCLK | bidirectional | Bidirectional I/O pin RB1 with weak pull-up and wake-up on change, also Comparator 1 input (C1IN-), ADC channel 1 input (AN1) or ICSP clock (Schmitt Trigger). |
| 13 | RB0/C1IN+/AN0/ICSPDAT | bidirectional | Bidirectional I/O pin RB0 with weak pull-up and wake-up on change, also Comparator 1 input (C1IN+), ADC channel 0 input (AN0) or ICSP data (Schmitt Trigger). |
| 14 | VSS | power_in | Ground reference for logic and I/O pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | PDIP-14 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage on VDD with respect to VSS | VDD | 0 | 6.5 | V | 83 | ||
| Voltage on MCLR with respect to VSS | 0 | 13.5 | V | 83 | |||
| Voltage on all other pins with respect to VSS | -0.3 | V | Upper limit printed as (VDD + 0.3V) | 83 | |||
| Ambient temperature under bias | -40 | 125 | C | 83 | |||
| Storage temperature | -65 | 150 | C | 83 | |||
| Max. current out of VSS pin | 200 | mA | 83 | ||||
| Max. current into VDD pin | 150 | mA | 83 | ||||
| Input clamp current | IIK | 20 | mA | VI < 0 or VI > VDD | 83 | ||
| Output clamp current | IOK | 20 | mA | VO < 0 or VO > VDD | 83 | ||
| Max. output current sunk by any I/O pin | 25 | mA | 83 | ||||
| Max. output current sourced by any I/O pin | 25 | mA | 83 | ||||
| Supply Voltage | VDD | 2 | 5.5 | V | See Figure 14-1 | 85 | |
| Operating Temperature (industrial) | TA | -40 | 85 | C | Industrial | 85 | |
| VDD Rise Rate to ensure Power-on Reset | SVDD | 0.05 | V/ms | See Section 8.4 Power-on Reset (POR) | 85 | ||
| Supply Current (FOSC = 4 MHz) | IDD | 175 | 250 | A | FOSC = 4 MHz, VDD = 2.0V | 85 | |
| Supply Current (FOSC = 4 MHz) | IDD | 400 | 700 | A | FOSC = 4 MHz, VDD = 5.0V | 85 | |
| Supply Current (FOSC = 8 MHz) | IDD | 250 | 400 | A | FOSC = 8 MHz, VDD = 2.0V | 85 | |
| Supply Current (FOSC = 8 MHz) | IDD | 0.75 | 1.2 | mA | FOSC = 8 MHz, VDD = 5.0V | 85 | |
| Supply Current (FOSC = 20 MHz) | IDD | 1.4 | 2.2 | mA | FOSC = 20 MHz, VDD = 5.0V | 85 | |
| Supply Current (FOSC = 32 kHz) | IDD | 11 | 22 | A | FOSC = 32 kHz, VDD = 2.0V | 85 | |
| Supply Current (FOSC = 32 kHz) | IDD | 38 | 55 | A | FOSC = 32 kHz, VDD = 5.0V | 85 | |
| Power-down Current | IPD | 0.1 | 1.2 | A | VDD = 2.0V | 85 | |
| Power-down Current | IPD | 0.35 | 2.2 | A | VDD = 5.0V | 85 | |
| WDT Current | IWDT | 1 | 3 | A | VDD = 2.0V | 85 | |
| WDT Current | IWDT | 7 | 16 | A | VDD = 5.0V | 85 | |
| Comparator Current (per comparator) | ICMP | 15 | 26 | A | VDD = 2.0V (per comparator) | 85 | |
| Comparator Current (per comparator) | ICMP | 60 | 76 | A | VDD = 5.0V (per comparator) | 85 | |
| CVREF Current | ICVREF | 30 | 75 | A | VDD = 2.0V (high range) | 85 | |
| CVREF Current | ICVREF | 75 | 135 | A | VDD = 5.0V (high range) | 85 | |
| Internal 0.6V Fixed Voltage Reference Current | IFVR | 100 | 120 | A | VDD = 2.0V (reference and 1 comparator enabled) | 85 | |
| Internal 0.6V Fixed Voltage Reference Current | IFVR | 175 | 205 | A | VDD = 5.0V (reference and 1 comparator enabled) | 85 | |
| A/D Conversion Current | IAD | 120 | 150 | A | 2.0V | 85 | |
| A/D Conversion Current | IAD | 200 | 250 | A | 5.0V | 85 | |
| Input Low Voltage, I/O ports with TTL buffer | VIL | 0.8 | V | For all 4.5 VDD 5.5V | 87 | ||
| Input Low Voltage, OSC1 (XT and LP modes) | VIL | 0.3 | V | 87 | |||
| Input High Voltage, I/O ports with TTL buffer | VIH | 2 | V | For all 4.5 VDD 5.5V | 87 | ||
| Input High Voltage, OSC1 (XT and LP modes) | VIH | 1.6 | V | 87 | |||
| PORTB weak pull-up current | IPUR | 50 | 250 | 400 | A | VDD = 5V, VPIN = VSS | 87 |
| Input leakage current, I/O ports | IIL | -1 | 1 | A | Vss VPIN VDD, pin at high-impedance | 87 | |
| Input leakage current, RB3/MCLR | IIL | -5 | 5 | A | Vss VPIN VDD | 87 | |
| Input leakage current, OSC1 | IIL | -5 | 5 | A | Vss VPIN VDD, XT, HS and LP osc configuration | 87 | |
| Output Low Voltage, I/O ports/CLKOUT | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40C to +85C | 87 | ||
| Capacitive loading, OSC2 pin | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 87 | ||
| Capacitive loading, all I/O pins and OSC2 | CIO | 50 | pF | 87 | |||
| VDD for read/write (Flash data memory) | VDRW | 5.5 | V | 87 | |||
| Input Offset Voltage (comparator) | VOS | 5 | 10 | mV | 88 | ||
| Input common mode voltage (comparator) | VCM | 0 | V | 88 | |||
| CMRR (comparator) | CMRR | 55 | db | 88 | |||
| Response Time (comparator) | TRT | 150 | 400 | ns | 88 | ||
| Comparator Mode Change to Output Valid | TMC2COV | 10 | s | 88 | |||
| Internal Voltage Reference | VIVRF | 0.5 | 0.6 | 0.7 | V | 88 | |
| A/D Resolution | NR | 8 | bit | 89 | |||
| A/D Integral Error | EINL | 1.5 | LSb | VDD = 5.0V | 89 | ||
| A/D Gain Error | EGN | -0.7 | 2.2 | LSb | VDD = 5.0V | 89 | |
| Recommended Impedance of Analog Voltage Source | ZAIN | 10 | K | 89 | |||
| Flash Data Memory Write Cycle Time | TDW | 2 | 3.5 | 5 | ms | 96 | |
| Flash Data Memory Erase Cycle Time | TDE | 2 | 3.5 | 5 | ms | 96 |
CAD (KiCad official)
- Symbol:
PIC16F526-I - Footprint:
Package_DIP:DIP-14_W7.62mm - 3D model: PDIP-14 (KiCad packages3D, STEP)
- 3D model files:
pic16f526-i-etched.step/pic16f526-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f526-i.step/pic16f526-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (122 pp, sha256
97ebb21279b86ccd, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).