component
RN8207C
Public Made by Adomby adom
RENERGY Energy Metering, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownRN8207C
RENERGY · Energy Metering · SOP-16
RN8207C from RENERGY, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AVDD | power_in | Analog power supply, 3V-5.5V, requires external 10μF and 0.1μF capacitors in parallel for decoupling. |
| 2 | V1P | input | Positive analog input of current channel with maximum ±1000mV in normal operation and ±6V absolute maximum. |
| 3 | V1N | input | Negative analog input of current channel with maximum ±1000mV in normal operation and ±6V absolute maximum. |
| 4 | V2P | input | Positive analog input of voltage channel with maximum ±1000mV in normal operation and ±6V absolute maximum. |
| 5 | V2N | input | Negative analog input of voltage channel with maximum ±1000mV in normal operation and ±6V absolute maximum. |
| 6 | REFV | bidirectional | 1.25V reference voltage input/output, requires external 10μF and 0.1μF capacitors in parallel for decoupling. |
| 7 | A0 | input | Serial communication address selection pin; used with A1 to configure UART address: {A1,A0}=00/01/10 selects address 0/1/2. |
| 8 | A1 | input | Serial communication address selection pin; used with A0 to configure UART address mode. |
| 9 | TX | output | UART transmit output at 4800 baud. |
| 10 | RX/RSTN | input | UART receive input and global reset pin; reset occurs when input is low for more than 20ms. |
| 11 | DGND | power_in | Digital ground. |
| 12 | DVDD | power_in | Digital power supply, 3V-5.5V, requires external 10μF and 0.1μF capacitors in parallel for decoupling. |
| 13 | OSCI | input | Clock input for external crystal or external clock source at typical frequency of 3.579545MHz. |
| 14 | OSCO | output | Crystal oscillator output terminal; can drive one CMOS load when OSCI has external clock connected. |
| 15 | IRQ_N/ZX | output | Programmable interrupt output (IRQ_N when EMUCON bit 7 = 0) or voltage channel zero-crossing detection output (ZX when EMUCON bit 7 = 1). |
| 16 | PF | output | Active energy pulse output, low level by default; frequency indicates transient power magnitude, capable of 5mA current sink. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENERGY |
| Package | SOP-16 |
| Category | Data Acquisition |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
RN8207C - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
rn8207c-etched.step/rn8207c-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rn8207c.step/rn8207c.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENERGY datasheet (14 pp, sha256
79bba7db16be6bf4, retrieved 2026-09-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).