component
LM3880QMF-1AF
Public Made by Adomby adom
Texas Instruments Supervisor And Reset ICs, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM3880QMF-1AF
Texas Instruments · Supervisor And Reset ICs · SOT-23-6
LM3880QMF-1AF from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Input supply pin, operating from 2.7 V to 5.5 V (absolute maximum 6 V); place it as close to the input supply as possible, with a 0.1 µF ceramic bypass capacitor recommended where noise is present. |
| 2 | GND | power_in | Ground reference for the device. |
| 3 | EN | input | Precision enable input with a 1.0 V to 1.4 V threshold (1.25 V typical) and a 7 µA internal pull-up; it should not be tied to VCC, so that the flags do not operate undefined during slow VCC rise. |
| 4 | FLAG3 | output | Open-drain output flag 3, which must be pulled up (100 kΩ typical); it is released last on power-up and first on power-down, with at most 50 mA sink current and 0.4 V maximum low-level output voltage at 1.2 mA. |
| 5 | FLAG2 | output | Open-drain output flag 2, which must be pulled up (100 kΩ typical) and may be pulled up to a separate supply no higher than VCC + 0.3 V; maximum sink current is 50 mA and maximum low-level output voltage is 0.4 V at 1.2 mA. |
| 6 | FLAG1 | output | Open-drain output flag 1, which must be pulled up (100 kΩ typical) and may be pulled up to a separate supply no higher than VCC + 0.3 V; maximum sink current is 50 mA and maximum low-level output voltage is 0.4 V at 1.2 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
LM3880QMF-1AF - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
lm3880qmf-1af-etched.step/lm3880qmf-1af-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm3880qmf-1af.step/lm3880qmf-1af.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (27 pp, sha256
cff19f703872dfd7, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).