Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

VRD1330MTX

AnaSem · Linear Voltage Regulators (LDO) · SOT-23-6

VRD1330MTX from AnaSem, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 EN1 input 1-Channel enable input: the VOUT1 regulator is shut down when EN1 is at VSS (level must be at most 0.3V low) and enabled when high (1.2V to 6.0V), with CL auto-discharge through 160Ω in shutdown.
2 VIN power_in Voltage input shared by both regulators, operating range 1.6V to 6.0V (absolute maximum -0.3V to +7.0V), with a at-least 1.0µF capacitor recommended between VIN and VSS.
3 EN2 input 2-Channel enable input: the VOUT2 regulator is shut down when EN2 is at VSS (level must be at most 0.3V low) and enabled when high (1.2V to 6.0V), with CL auto-discharge through 160Ω in shutdown.
4 VOUT2 power_out 2-Channel regulated output, which must not exceed VIN+0.3V, with a at-least 1.0µF ceramic output capacitor recommended between VOUT and VSS as close as possible.
5 VSS power_in Power ground, the common return for VIN, both outputs and both enable inputs.
6 VOUT1 power_out 1-Channel regulated output, which must not exceed VIN+0.3V, with a at-least 1.0µF ceramic output capacitor recommended between VOUT and VSS as close as possible.

Key specifications

Parameter Value
Manufacturer AnaSem
Package SOT-23-6
Category Power Management ICs
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage accuracy, Ch-1 (VOUT1 = 1.30V) VOUT -20 20 mV VOUT≦1.90V; VOUT+1.0V≦VIN≦6.0V, IOUT=30mA, Ta=-40°C ~ +85°C 7
Output voltage accuracy, Ch-2 (VOUT2 = 3.00V) VOUT -1 1 % VOUT≧1.95V (printed as VOUT×0.99 / VOUT×1.01); VOUT+1.0V≦VIN≦6.0V, IOUT=30mA, Ta=-40°C ~ +85°C 7
Dropout voltage, Ch-1 (VOUT1 = 1.30V) VDROP 210 340 mV IOUT=100mA; 1.2V≦VOUT≦1.65V 7
Dropout voltage, Ch-2 (VOUT2 = 3.00V) VDROP 90 137 mV IOUT=100mA; 2.9V≦VOUT≦3.45V 7
Current consumption IDD 50 80 µA VIN=VOUT+1.0V, VOUT=Open, IOUT=0mA 8
Standby current ISTB 0.01 0.1 µA EN=VSS 8
Input voltage VIN 1.6 6 V 8
Load regulation ∆VOUT 10 40 mV VIN=VOUT+1.0V, IOUT=0.1mA~100mA 8
Line regulation ∆VOUT / ∆VIN•VOUT 0.01 0.1 %/V VOUT+1.0V≦VIN≦6.0V, IOUT=30mA 8
Limit current ILIMIT 300 mA EN=VIN 8
Output voltage temperature coefficient ∆VOUT / ∆Ta•VOUT -20 20 ppm/°C VEN=VIN, IOUT=300mA, Ta=-40°C ~ +85°C 8
EN high level voltage VENH 1.2 6 V 8
EN low level voltage VENL 0.3 V 8
EN high level current IENH -0.1 0.1 µA VEN=VIN 8
EN low level current IENL -0.1 0.1 µA VEN=VSS 8
Input voltage range (absolute maximum) VIN -0.3 7 V 6
Output current (absolute maximum) IOUT 500 mA 6
Output voltage range (absolute maximum) VOUT -0.3 0.3 V Printed as VSS -0.3 ~ VIN +0.3 V; min is relative to VSS, max is relative to VIN 6
Power dissipation, SOT-26 PD 600 mW SOT-26 package; power dissipation depends on board mounting, PCB 50mm×50mm×1.6mm 6
Operating temperature range TOPR -40 85 °C 6
Storage temperature range TSTG -55 125 °C 6

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: VRD1330MTX
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2000000000000002 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: vrd1330mtx-etched.step / vrd1330mtx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); vrd1330mtx.step / vrd1330mtx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: AnaSem datasheet (35 pp, sha256 8a7839f60b52e53b, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF