Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LTC6652AHMS8-1.25#PBF

Analog Devices · Voltage References · MSOP-8

LTC6652AHMS8-1.25#PBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DNC unconnected Do Not Connect; this pin must be left unconnected.
2 VIN power_in Power supply input with a minimum of VOUT + 300mV or 2.7V (whichever is higher) and a maximum of 13.2V; bypassing with a 0.1µF capacitor to GND improves PSRR.
3 SHDN input Active-low shutdown input that powers the device down to <2µA, and for normal operation it must be tied to VIN (SHDN should be ≥2.0V).
4 GND power_in Device ground and the reference point for the GND* pins (5, 7, 8).
5 GND power_in Internal function pin that must be grounded (connect to device GND, pin 4).
6 VOUT power_out Voltage reference output; an output capacitor is not required, and a 0.1µF to 10µF capacitor can be beneficial for some applications.
7 GND power_in Internal function pin that must be grounded (connect to device GND, pin 4).
8 GND power_in Internal function pin that must be grounded (connect to device GND, pin 4).

Key specifications

Parameter Value
Manufacturer Analog Devices
Package MSOP-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage (LTC6652A accuracy, 1.25V option) -0.05 0.05 % 3
Output Voltage Temperature Coefficient (LTC6652A) 2 5 ppm/°C l: full operating temperature range 3
Line Regulation 2 50 ppm/V VOUT + 0.5V ≤ VIN ≤ 13.2V, SHDN = VIN; l: full operating temperature range 3
Load Regulation (sourcing) 20 75 ppm/mA ISOURCE = 5mA, LTC6652-1.25; l 4
Load Regulation (sinking) 80 250 ppm/mA ISINK = 1mA, LTC6652-1.25; l 4
Minimum Operating Voltage 2.7 V ISOURCE = 5mA, VOUT Error ≤ 0.1%, LTC6652-1.25; l 4
Output Short-Circuit Current (short VOUT to GND) 16 mA Short VOUT to GND 4
Output Short-Circuit Current (short VOUT to VIN) 16 mA Short VOUT to VIN 4
Shutdown Pin (SHDN) Logic High Input Voltage 2 V l 4
Shutdown Pin (SHDN) Logic High Input Current 0.1 1 µA l 4
Shutdown Pin (SHDN) Logic Low Input Voltage 0.8 V l 4
Shutdown Pin (SHDN) Logic Low Input Current 0.1 1 µA l 4
Supply Current 350 560 µA No load; l 4
Shutdown Current 0.1 2 µA SHDN tied to GND; l 4
Output Voltage Noise (LTC6652-1.25) 2.4 ppmP-P 0.1Hz ≤ f ≤ 10Hz 4
Output Voltage Noise (10Hz to 1kHz) 3 ppmRMS 10Hz ≤ f ≤ 1kHz 4
Turn-On Time 100 µs 0.1% settling, CLOAD = 0 4
Long-Term Drift of Output Voltage (MS8) 60 ppm/√kHr LTC6652MS8 (MS8 package) 4
Hysteresis (MS8) 80 ppm ΔT = -40°C to 125°C, LTC6652MS8 4
Hysteresis (MS8) 75 ppm ΔT = -40°C to 85°C, LTC6652MS8 4
Hysteresis (MS8) 45 ppm ΔT = 0°C to 70°C, LTC6652MS8 4
Output Source Current (guaranteed, 1.25V option) 5 mA 1.25V and 2.048V versions 10
Output Sink Current (guaranteed, 1.25V option) 1 mA 1.25V and 2.048V versions 10
Input Voltage VIN (supply range) VIN 2.7 13.2 V Minimum is VOUT + 300mV or 2.7V, whichever is higher 9
VIN to GND VIN -0.3 13.2 V 2
SHDN to GND SHDN -0.3 V Maximum is VIN + 0.3V 2
Output Voltage (absolute maximum) VOUT -0.3 V Maximum is VIN + 0.3V 2
Operating Temperature Range TA -40 125 °C 2
Storage Temperature Range TSTG -65 150 °C Note 2 2
Maximum Junction Temperature TJMAX 150 °C 2
Thermal Resistance, junction to ambient (MS8) θJA 200 °C/W 8-Lead Plastic MSOP (MS8) 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing abs Plastic mould compounds absorb water. With changes 14

CAD (KiCad official)

  • Symbol: LTC6652AHMS8-1.25#PBF
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: ltc6652ahms8-1-25-pbf-etched.step / ltc6652ahms8-1-25-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc6652ahms8-1-25-pbf.step / ltc6652ahms8-1-25-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 cb57839f236ed0a6, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF