Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN74LVC4245AIPWREP

Texas Instruments · Translators, Level Shifters · TSSOP-24

SN74LVC4245AIPWREP from Texas Instruments, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCCA power_in A-port supply voltage (labeled 5 V), recommended operating range 4.5 V to 5.5 V with an absolute maximum of 6.5 V.
2 DIR input Direction control: DIR low transfers B data to the A bus and DIR high transfers A data to the B bus when OE is low; DIR should be ramped with VCCA if held high during power-up.
3 A1 bidirectional A-port data bit 1, referenced to VCCA (4.5 V to 5.5 V), with a continuous output current limit of ±50 mA.
4 A2 bidirectional A-port data bit 2, referenced to VCCA (4.5 V to 5.5 V), with a continuous output current limit of ±50 mA.
5 A3 bidirectional A-port data bit 3, referenced to VCCA (4.5 V to 5.5 V), with a continuous output current limit of ±50 mA.
6 A4 bidirectional A-port data bit 4, referenced to VCCA (4.5 V to 5.5 V), with a continuous output current limit of ±50 mA.
7 A5 bidirectional A-port data bit 5, referenced to VCCA (4.5 V to 5.5 V), with a continuous output current limit of ±50 mA.
8 A6 bidirectional A-port data bit 6, referenced to VCCA (4.5 V to 5.5 V), with a continuous output current limit of ±50 mA.
9 A7 bidirectional A-port data bit 7, referenced to VCCA (4.5 V to 5.5 V), with a continuous output current limit of ±50 mA.
10 A8 bidirectional A-port data bit 8, referenced to VCCA (4.5 V to 5.5 V), with a continuous output current limit of ±50 mA.
11 GND power_in Ground reference; ground must be connected before any supply voltage is applied.
12 GND power_in Ground reference; ground must be connected before any supply voltage is applied.
13 GND power_in Ground reference; ground must be connected before any supply voltage is applied.
14 B8 bidirectional B-port data bit 8, referenced to VCCB (2.7 V to 3.6 V), with a continuous output current limit of ±50 mA.
15 B7 bidirectional B-port data bit 7, referenced to VCCB (2.7 V to 3.6 V), with a continuous output current limit of ±50 mA.
16 B6 bidirectional B-port data bit 6, referenced to VCCB (2.7 V to 3.6 V), with a continuous output current limit of ±50 mA.
17 B5 bidirectional B-port data bit 5, referenced to VCCB (2.7 V to 3.6 V), with a continuous output current limit of ±50 mA.
18 B4 bidirectional B-port data bit 4, referenced to VCCB (2.7 V to 3.6 V), with a continuous output current limit of ±50 mA.
19 B3 bidirectional B-port data bit 3, referenced to VCCB (2.7 V to 3.6 V), with a continuous output current limit of ±50 mA.
20 B2 bidirectional B-port data bit 2, referenced to VCCB (2.7 V to 3.6 V), with a continuous output current limit of ±50 mA.
21 B1 bidirectional B-port data bit 1, referenced to VCCB (2.7 V to 3.6 V), with a continuous output current limit of ±50 mA.
22 OE input Output enable: when low the device transfers data per DIR, and when high both ports are isolated; tie to VCCA through a pullup so it ramps with VCCA at power-up.
23 VCCB power_in B-port supply voltage (labeled 3.3 V), recommended operating range 2.7 V to 3.6 V with an absolute maximum of 4.6 V.
24 VCCB power_in B-port supply voltage (labeled 3.3 V), recommended operating range 2.7 V to 3.6 V with an absolute maximum of 4.6 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-24
Category Logic
Pins 24

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range, VCCA VCCA -0.5 6.5 V 3
Input voltage range, A port VI -0.5 V A port; maximum printed as VCCA + 0.5 3
Input voltage range, control inputs VI -0.5 6 V Control inputs 3
Output voltage range, A port VO -0.5 V A port; maximum printed as VCCA + 0.5 3
Input clamp current IK -50 mA VI < 0 3
Output clamp current IOK -50 mA VO < 0 3
Continuous output current IO -50 50 mA 3
Continuous current through VCCA or GND -100 100 mA 3
Package thermal impedance θJA 88 °C/W 3
Storage temperature range Tstg -65 150 °C 3
Supply voltage range, VCCB VCCB -0.5 4.6 V Over operating free-air temperature range for VCCB = 2.7 V to 3.6 V 3
Input voltage range, B port VI -0.5 V B port; maximum printed as VCCB + 0.5 3
Output voltage range, B port VO -0.5 V B port; maximum printed as VCCB + 0.5 3
Supply voltage, VCCA VCCA 4.5 5.5 V For VCCA = 4.5 V to 5.5 V 4
High-level input voltage (A-side range) VIH 2 V For VCCA = 4.5 V to 5.5 V 4
Low-level input voltage (A-side range) VIL 0.8 V For VCCA = 4.5 V to 5.5 V 4
High-level output current, A port IOH -24 mA For VCCA = 4.5 V to 5.5 V 4
Low-level output current, A port IOL 24 mA For VCCA = 4.5 V to 5.5 V 4
Operating free-air temperature TA -40 85 °C 4
Supply voltage, VCCB VCCB 2.7 3.6 V For VCCB = 2.7 V to 3.6 V 4
High-level input voltage (B-side range) VIH 2 V VCCB = 2.7 V to 3.6 V 4
Low-level input voltage (B-side range) VIL 0.8 V VCCB = 2.7 V to 3.6 V 4
High-level output current, B port IOH -12 mA VCCB = 2.7 V 4
High-level output current, B port IOH -24 mA VCCB = 3 V 4
Low-level output current, B port IOL 12 mA VCCB = 2.7 V 4
Low-level output current, B port IOL 24 mA VCCB = 3 V 4
High-level output voltage, A port VOH 4.3 V IOH = -100 µA, VCCA = 4.5 V 5
High-level output voltage, A port VOH 5.3 V IOH = -100 µA, VCCA = 5.5 V 5
High-level output voltage, A port VOH 3.7 V IOH = -24 mA, VCCA = 4.5 V 5
High-level output voltage, A port VOH 4.7 V IOH = -24 mA, VCCA = 5.5 V 5
Low-level output voltage, A port VOL 0.2 V IOL = 100 µA, VCCA = 4.5 V 5
Low-level output voltage, A port VOL 0.55 V IOL = 24 mA, VCCA = 4.5 V 5
Control input current II -1 1 µA Control inputs, VI = VCCA or GND, VCCA = 5.5 V 5
Off-state output current, A port IOZ -5 5 µA A port, VO = VCCA or GND, VCCA = 5.5 V 5
Quiescent supply current, VCCA ICCA 80 µA VI = VCCA or GND, IO = 0, VCCA = 5.5 V 5
Additional quiescent supply current per input, VCCA ΔICCA 1.5 mA One input at 3.4 V, other inputs at VCCA or GND, VCCA = 5.5 V 5
High-level output voltage, B port VOH 2.2 V IOH = -12 mA, VCCB = 2.7 V 5
High-level output voltage, B port VOH 2.4 V IOH = -12 mA, VCCB = 3 V 5
High-level output voltage, B port VOH 2 V IOH = -24 mA, VCCB = 3 V 5
Low-level output voltage, B port VOL 0.2 V IOL = 100 µA, VCCB = 2.7 V to 3.6 V 5
Low-level output voltage, B port VOL 0.4 V IOL = 12 mA, VCCB = 2.7 V 5
Low-level output voltage, B port VOL 0.55 V IOL = 24 mA, VCCB = 3 V 5
Off-state output current, B port IOZ -5 5 µA B port, VO = VCCB or GND, VCCB = 3.6 V 5
Quiescent supply current, VCCB ICCB 50 µA VI = VCCB or GND, IO = 0, VCCB = 3.6 V 5
Additional quiescent supply current per input, VCCB ΔICCB 0.5 mA One input at VCCB, 0.6 V, other inputs at VCCB or GND, VCCB = 2.7 V to 3.6 V 5
Propagation delay, A to B (low-to-high) tPLH 1 6.7 ns VCCA = 5 V ± 0.5 V, VCCB = 2.7 V to 3.6 V, CL = 50 pF 6
Propagation delay, A to B (high-to-low) tPHL 1 6.3 ns VCCA = 5 V ± 0.5 V, VCCB = 2.7 V to 3.6 V, CL = 50 pF 6
Propagation delay, B to A (low-to-high) tPLH 1 5 ns VCCA = 5 V ± 0.5 V, VCCB = 2.7 V to 3.6 V, CL = 50 pF 6
Propagation delay, B to A (high-to-low) tPHL 1 6.1 ns VCCA = 5 V ± 0.5 V, VCCB = 2.7 V to 3.6 V, CL = 50 pF 6
Enable time, OE to A (low-level) tPZL 1 9 ns VCCA = 5 V ± 0.5 V, VCCB = 2.7 V to 3.6 V, CL = 50 pF 6
Enable time, OE to A (high-level) tPZH 1 8.1 ns VCCA = 5 V ± 0.5 V, VCCB = 2.7 V to 3.6 V, CL = 50 pF 6
Enable time, OE to B (low-level) tPZL 1 8.8 ns VCCA = 5 V ± 0.5 V, VCCB = 2.7 V to 3.6 V, CL = 50 pF 6
Enable time, OE to B (high-level) tPZH 1 9.8 ns VCCA = 5 V ± 0.5 V, VCCB = 2.7 V to 3.6 V, CL = 50 pF 6
Disable time, OE to A (low-level) tPLZ 1 7 ns VCCA = 5 V ± 0.5 V, VCCB = 2.7 V to 3.6 V, CL = 50 pF 6
Disable time, OE to A (high-level) tPHZ 1 5.8 ns VCCA = 5 V ± 0.5 V, VCCB = 2.7 V to 3.6 V, CL = 50 pF 6
Disable time, OE to B (low-level) tPLZ 1 7.7 ns VCCA = 5 V ± 0.5 V, VCCB = 2.7 V to 3.6 V, CL = 50 pF 6
Disable time, OE to B (high-level) tPHZ 1 7.8 ns VCCA = 5 V ± 0.5 V, VCCB = 2.7 V to 3.6 V, CL = 50 pF 6

CAD (KiCad official)

  • Symbol: SN74LVC4245AIPWREP
  • Footprint: Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm
  • 3D model: TSSOP-24 (KiCad packages3D, STEP)
  • 3D model files: sn74lvc4245aipwrep-etched.step / sn74lvc4245aipwrep-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74lvc4245aipwrep.step / sn74lvc4245aipwrep.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (16 pp, sha256 8f7c3fb72d873ec9, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF