Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP1316MT-29LE

Microchip Tech · Monitors & Reset Circuits · SOT-23-5

MCP1316MT-29LE from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 RST output Open-drain active-low Reset output with internal pull-up resistor (typically 4.7 kΩ) that goes low when VDD falls below VTRIP, MR is forced low, WDI sees no edge within the time-out period, or during power-up.
2 VSS power_in The ground reference for the device.
3 MR input Active-low Manual Reset input with internal pull-up and noise filtering, allowing a push button to ground to force RST active.
4 WDI input Watchdog Timer input where an edge transition resets the timer (standard period 1.6 s typical) and a falling edge is required to start it.
5 VDD power_in The positive supply for the device, with a stated voltage range of 1.0V to 5.5V.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage Range VDD 1 5.5 V 3
Specified VDD Value to VOUT Low VDD 1 V I RST = 10 µA, V RST < 0.3V 3
Operating Current (Watchdog Timer Active) IDD 5 10 µA Watchdog Timer Active 3
Operating Current (Watchdog Timer Inactive) IDD 1 2 µA Watchdog Timer Inactive 3
Operating Current (VDD < VTRIP) IDD 1 2 µA VDD < VTRIP 3
Operating Current (Reset Delay Timer Active) IDD 5 10 µA Reset Delay Timer Active 3
VDD Trip Point MCP13XX-29 VTRIP 2.857 2.9 2.944 V TA = +25°C (Note 1) 4
VDD Trip Point MCP13XX-29 VTRIP 2.828 2.9 2.973 V TA = -40°C to +125°C (Note 2) 4
Threshold Hysteresis MCP13XX-29 VHYS 0.029 0.174 V TA = +25°C (Note 3) 6
VDD Trip Point Tempco TTPCO -40 40 ppm/°C 5
RST/RST Low-Level Output Voltage VOL 0.3 V IOL = 50 µA, 1.0V ≤ VDD ≤ 1.5V 8
Open-Drain High Voltage on Output VODH 13.5 V Open-Drain Output pin only, VDD = 3.0V, time voltage > 5.5V applied 100 µs, current into pin limited to 2 mA, +25°C operation recommended (Note 4, Note 5) 8
Input Leakage Current (MR and WDI) IIL -1 1 µA VSS ≤ VPIN ≤ VDD 8
Open-Drain Output Leakage Current IOD 0.003 1 µA 8
Output Pin Capacitive Loading (RST and RST) CO 50 pF Tester loading to meet the AC timing specifications 8
Reset Active Time (Standard Time Out) tRST 140 200 280 ms Standard Time Out 9
MR Pulse Width tMR 1 µs 10
WDI Pulse Width tWP 50 ns 10
Watchdog Time-Out Period (Standard Time Out) tWD 1.12 1.6 2.4 sec Standard Time Out 10
Specified Temperature Range TA -40 125 °C Except MCP13XX-25 (or below) 11
Maximum Junction Temperature TJ 150 °C 11
Thermal Resistance, 5L-SOT-23 JA 220.7 °C/W 11
Supply Voltage (VDD to VSS) 7 V 3
Input current (VDD) 10 mA 3
Output current (RST) 10 mA 3
Voltage on all inputs and outputs, except Open-Drain RST (with no internal pull-up resistor), w.r.t. VSS -0.6 V 3
Storage temperature -65 150 °C 3
Ambient temp. with power applied -40 125 °C With power applied 3

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: MCP1316MT-29LE
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: mcp1316mt-29le-ot-etched.step / mcp1316mt-29le-ot-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp1316mt-29le-ot.step / mcp1316mt-29le-ot.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (54 pp, sha256 f313bca289b277f3, retrieved 2026-11-18)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF