3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLPC804M111JDH24FP
NXP Semicon · NXP MCU · TSSOP-24
LPC804M111JDH24FP from NXP Semicon, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PIO0_18 | bidirectional | General-purpose port 0 input/output 18; 5 V tolerant pad with configurable pull-up/pull-down resistors and hysteresis, including a high-current output driver. |
| 2 | PIO0_16/ACMP_I4/ADC_3 | bidirectional | General-purpose port 0 input/output 16, also analog comparator common input 4 and ADC input 3; 5 V tolerant with configurable pull-up/pull-down and hysteresis. |
| 3 | VDDIO | power_in | Supply voltage for the I/Os on the left side of the package; present only on the dual-supply device. |
| 4 | PIO0_13/ADC_10 | bidirectional | General-purpose port 0 input/output 13 and ADC input 10; 5 V tolerant with configurable modes and hysteresis, but not 5 V tolerant when configured as an analog input. |
| 5 | PIO0_12 | bidirectional | General-purpose port 0 input/output 12 and ISP entry pin, where a LOW level during reset starts the ISP command handler; high-drive output pin. |
| 6 | RESET/PIO0_5 | input | External reset input where a LOW-going pulse as short as 50 ns resets the device; the pin has a 20 ns glitch filter and can be left unconnected or used as GPIO if reset is not needed. |
| 7 | PIO0_4/ADC_11/TRSTN | bidirectional | General-purpose port 0 input/output 4 and ADC input 11, serving as U0_TXD in ISP mode on single-supply devices and as TRST in boundary scan mode. |
| 8 | SWCLK/PIO0_3/TCK | bidirectional | Serial Wire Clock, enabled by default, with TCK in boundary scan mode and general-purpose port 0 input/output 3; high-drive output pin. |
| 9 | SWDIO/PIO0_2/TMS | bidirectional | Serial Wire Debug I/O, enabled by default, with TMS in boundary scan mode and general-purpose port 0 input/output 2; high-drive output pin. |
| 10 | PIO0_11/ADC_6/WKTCLKIN | bidirectional | General-purpose port 0 input/output 11 and ADC input 6; can host an external clock for the self-wake-up timer, active in sleep, deep-sleep and power-down modes; WAKEUP pin. |
| 11 | PIO0_10/ADC_7 | bidirectional | General-purpose port 0 input/output 10 and ADC input 7; WAKEUP pin for wake-up from deep power-down. |
| 12 | PIO0_21/ACMP_I5 | bidirectional | General-purpose port 0 input/output 21 and analog comparator common input 5. |
| 13 | PIO0_20 | bidirectional | General-purpose port 0 input/output 20; high-drive output pin. |
| 14 | PIO0_15/ADC_8 | bidirectional | General-purpose port 0 input/output 15 and ADC input 8; 5 V tolerant with configurable pull-up/pull-down and hysteresis; WAKEUP pin. |
| 15 | PIO0_1/ADC_0/ACMP_I2/TDI/CLKIN | bidirectional | General-purpose port 0 input/output 1, ADC input 0 and analog comparator input 2; TDI in boundary scan mode and external clock input CLKIN with a maximum frequency of 15 MHz. |
| 16 | PIO0_9/ADC_4 | bidirectional | General-purpose port 0 input/output 9 and ADC input 4; serves as U0_TXD in ISP mode on dual-supply devices; WAKEUP pin. |
| 17 | PIO0_8/ADC_5 | bidirectional | General-purpose port 0 input/output 8 and ADC input 5; serves as U0_RXD in ISP mode on dual-supply devices; WAKEUP pin. |
| 18 | VDD | power_in | Supply voltage; when VDDIO is present it supplies the right-side I/Os and the core voltage regulator, otherwise it also supplies the left-side I/Os. |
| 19 | VSS | power_in | Ground. |
| 20 | PIO0_7/ADC_1/ACMPVREF | bidirectional | General-purpose port 0 input/output 7, ADC input 1, and alternate reference voltage for the analog comparator. |
| 21 | VREFP | power_in | ADC positive reference voltage that must be equal to or lower than VDD. |
| 22 | PIO0_0/ACMP_I1/TDO | bidirectional | General-purpose port 0 input/output 0 and analog comparator input 1; TDO in boundary scan mode and U0_RXD in ISP mode on single-supply devices. |
| 23 | PIO0_14/ACMP_I3/ADC_2 | bidirectional | General-purpose port 0 input/output 14, analog comparator common input 3 and ADC input 2. |
| 24 | PIO0_19/DACOUT | bidirectional | General-purpose port 0 input/output 19 and 10-bit DAC output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | TSSOP-24 |
| Category | Embedded Processors & Controllers |
| Pins | 24 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating ambient temperature range | Tamb | -40 | 105 | °C | 3 | ||
| VDD supply voltage (core and external rail) | VDD | -0.5 | 4.6 | V | 39 | ||
| Vref reference voltage on pin VREFP | Vref | -0.5 | V | 39 | |||
| Input voltage, 5 V tolerant I/O pins | VI | -0.5 | 5.4 | V | 5 V tolerant I/O pins; VDD >= 1.71 V | 39 | |
| Input voltage, 3 V tolerant I/O pin ACMPVREF | VI | -0.5 | 3.6 | V | 3 V tolerant I/O pin ACMPVREF | 39 | |
| Analog input voltage on digital pins configured for an analog function | VIA | -0.5 | 4.6 | V | 39 | ||
| Supply current per supply pin (TSSOP24) | IDD | 22 | mA | per supply pin (TSSOP24) | 39 | ||
| Ground current per ground pin (TSSOP24) | ISS | 45 | mA | per ground pin (TSSOP24) | 39 | ||
| I/O latch-up current | Ilatch | 100 | mA | (0.5VDD) < VI < (1.5VDD); Tj < 125 C | 39 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 39 | ||
| Maximum junction temperature | Tj(max) | 150 | °C | 39 | |||
| Total power dissipation (TSSOP24, JEDEC) | Ptot(pack) | 0.34 | W | TSSOP24, based on package heat transfer; JEDEC (4.5 in x 4 in); still air | 40 | ||
| Total power dissipation (TSSOP24, single layer) | Ptot(pack) | 0.26 | W | TSSOP24, based on package heat transfer; single layer (4.5 in x 3 in); still air | 40 | ||
| Electrostatic discharge voltage | Vesd | 2000 | V | human body model; all pins | 40 | ||
| Clock frequency, internal CPU/system clock | fclk | 15 | MHz | internal CPU/system clock | 42 | ||
| Supply voltage (core and external rail) | VDD | 1.71 | 3.6 | V | 42 | ||
| Supply voltage for ADC operations | VDD | 2.5 | 3.6 | V | For ADC operations | 42 | |
| Supply voltage for DAC operations | VDD | 2.7 | 3.6 | V | For DAC operations | 42 | |
| I/O rail supply voltage | VDDIO | 1.71 | 3.6 | V | 42 | ||
| I/O rail supply voltage for ADC operations | VDDIO | 2.5 | 3.6 | V | For ADC operations | 42 | |
| I/O rail supply voltage for DAC operations | VDDIO | 2.7 | 3.6 | V | For DAC operations | 42 | |
| ADC positive reference voltage | Vref | 2.5 | V | on pin VREFP | 42 | ||
| Input/output capacitance, pins with analog and digital functions | Cio | 7.1 | pF | pins with analog and digital functions | 42 | ||
| Input/output capacitance, pins with digital functions only | Cio | 2.8 | pF | pins with digital functions only | 42 | ||
| Supply current, deep-sleep mode | IDD | 100 | 175 | µA | Deep-sleep mode; VDD = 3.3 V; Tamb = 25 C | 43 | |
| Supply current, deep-sleep mode | IDD | 240 | µA | Deep-sleep mode; VDD = 3.3 V; Tamb = 105 C | 43 | ||
| Supply current, power-down mode | IDD | 6 | 14 | µA | Power-down mode; VDD = 3.3 V; Tamb = 25 C | 43 | |
| Supply current, power-down mode | IDD | 75 | µA | Power-down mode; VDD = 3.3 V; Tamb = 105 C | 43 | ||
| Supply current, deep power-down mode | IDD | 0.15 | 0.5 | µA | Deep power-down mode; VDD = 3.3 V; Tamb = 25 C | 43 | |
| Supply current, deep power-down mode | IDD | 7 | µA | Deep power-down mode; VDD = 3.3 V; Tamb = 105 C | 43 | ||
| Thermal resistance tolerance, junction-to-ambient (JEDEC) | Rth(j-a) | -15 | 15 | % | TSSOP24; JEDEC (4.5 in x 4 in); still air | 41 | |
| Thermal resistance tolerance, junction-to-ambient (single layer) | Rth(j-a) | -15 | 15 | % | TSSOP24; single-layer (4.5 in x 3 in); still air | 41 | |
| Thermal resistance tolerance, junction-to-case | Rth(j-c) | -15 | 15 | % | TSSOP24 | 41 | |
| HIGH-level input current (standard port pins) | IIH | 0.5 | 10 | nA | VI = VDD; on-chip pull-down resistor disabled | 47 | |
| LOW-level input current (standard port pins) | IIL | 0.5 | 10 | nA | VI = 0 V; on-chip pull-up resistor disabled | 47 | |
| OFF-state output current (standard port pins) | IOZ | 0.5 | 10 | nA | VO = 0 V; VO = VDD; on-chip pull-up/down resistors disabled | 47 | |
| Input voltage (standard port pins) | VI | 0 | 5.4 | V | VDD >= 1.71 V; 5 V tolerant pins except PIO0_7 | 47 | |
| Input voltage (standard port pins) | VI | 0 | 3.6 | V | VDD = 0 V | 47 | |
| LOW-level output voltage (standard port pins) | VOL | 0.5 | V | IOL = 4 mA; 2.5 V <= VDD <= 3.6 V | 47 | ||
| HIGH-level output current (standard port pins) | IOH | 4 | mA | VOH = VDD - 0.4 V; 2.5 V <= VDD <= 3.6 V | 47 | ||
| HIGH-level output current (standard port pins) | IOH | 3 | mA | VOH = VDD - 0.5 V; 1.71 V <= VDD < 2.5 V | 47 | ||
| LOW-level output current (standard port pins) | IOL | 4 | mA | VOL = 0.5 V; 2.5 V <= VDD <= 3.6 V | 47 | ||
| LOW-level output current (standard port pins) | IOL | 3 | mA | VOL = 0.5 V; 1.71 V <= VDD < 2.5 V | 47 | ||
| HIGH-level short-circuit output current (standard port pins) | IOHS | 45 | mA | VOH = 0 V | 47 | ||
| LOW-level short-circuit output current (standard port pins) | IOLS | 50 | mA | VOL = VDD | 47 | ||
| Pull-down current (standard port pins) | Ipd | 10 | 50 | 150 | µA | VI = 5 V | 47 |
| Pull-up current (standard port pins) | Ipu | 10 | 50 | 90 | µA | VI = 0 V; 2.0 V <= VDD <= 3.6 V | 47 |
| Pull-up current (standard port pins) | Ipu | 7 | 50 | 85 | µA | VI = 0 V; 1.71 V <= VDD < 2.0 V | 47 |
| FRO clock frequency tolerance (9, 12, 15 MHz) | fosc(RC) | -1 | 1 | % | 0 C <= Tamb <= 70 C | 53 | |
| FRO clock frequency tolerance (9, 12, 15 MHz) | fosc(RC) | -2 | 1 | % | 20 C <= Tamb <= 70 C | 53 | |
| FRO clock frequency tolerance (9, 12, 15 MHz) | fosc(RC) | -2 | 2 | % | Tamb <= 85 C | 53 | |
| FRO clock frequency tolerance (9, 12, 15 MHz) | fosc(RC) | -3.5 | 2.5 | % | -40 C <= Tamb <= 105 C | 53 | |
| LPOsc clock frequency tolerance (1 MHz nominal) | fosc(RC) | -3 | 3 | % | 53 | ||
| Flash endurance | Nendu | 200000 | 500000 | cycles | 52 | ||
| Flash retention time, powered | tret | 10 | years | powered | 52 | ||
| Flash retention time, not powered | tret | 20 | years | not powered | 52 | ||
| Thermal resistance, junction-to-ambient (JEDEC) | Rth(j-a) | 114 | °C/W | TSSOP24; JEDEC (4.5 in x 4 in); still air | 41 | ||
| Thermal resistance, junction-to-ambient (single layer) | Rth(j-a) | 153 | °C/W | TSSOP24; single-layer (4.5 in x 3 in); still air | 41 | ||
| Thermal resistance, junction-to-case | Rth(j-c) | 31 | °C/W | TSSOP24 | 41 |
CAD (KiCad official)
- Symbol:
LPC804M111JDH24FP - Footprint:
Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm - 3D model: TSSOP-24 (KiCad packages3D, STEP)
- 3D model files:
lpc804m111jdh24fp-etched.step/lpc804m111jdh24fp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lpc804m111jdh24fp.step/lpc804m111jdh24fp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (90 pp, sha256
4be3cee5e8ceae1d, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).