Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

INA155EA

Texas Instruments · Instrumentation Amplifiers · VSSOP-8

INA155EA from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RG passive Gain-setting resistor terminal; leave open for G=10 or connect through external resistor to pin 8 for gains between 10 and 50 V/V.
2 VIN- power_in Inverting differential input accepting signals within safe voltage range of (V-)-0.5V to (V+)+0.5V.
3 VIN+ power_in Non-inverting differential input accepting signals within safe voltage range of (V-)-0.5V to (V+)+0.5V.
4 V- power_in Negative supply and circuit ground reference terminal.
5 Ref input Output reference input terminal; must be driven by low-impedance source to maintain specified common-mode rejection and output voltage swing within 10mV of supply rails.
6 VOUT output Analog output providing rail-to-rail amplified signal with output voltage swing within 10mV of either supply rail.
7 V+ power_in Positive power supply terminal with specified operating range +2.7V to +5.5V across -55°C to +125°C temperature range.
8 RG passive Gain-setting resistor terminal; short directly to pin 1 for G=50 or connect external resistor between pins 1 and 8 for gains between 10 and 50 V/V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Amplifiers/Comparators
Pins 8

CAD (KiCad official)

  • Symbol: INA155EA
  • Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
  • 3D model: VSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: ina155ea-etched.step / ina155ea-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina155ea.step / ina155ea.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (17 pp, sha256 477f3b4451cfbf8f, retrieved 2026-09-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF