component
hx24c08drg
Public Unreviewedby Ray
HANSCHIP semiconductor EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
README
markdownHX24C08DRG
HANSCHIP semiconductor · EEPROM · SOP-8
HX24C08DRG from HANSCHIP semiconductor, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Address input. On HX24C08, A0 is a no-connect (device address is decoded only from A2 and internal page bits); the datasheet states it may be tied to GND. |
| 2 | A1 | input | Address input. On HX24C08, A1 is a no-connect (this bit position is repurposed as an internal memory page-address bit); the datasheet states it may be tied to GND. |
| 3 | A2 | input | Hardware device-address input for HX24C08. Must compare to the A2 bit of the I2C device-address byte; allows up to two 8K devices on one bus. |
| 4 | GND | power_in | Ground reference (0 V) for the device. |
| 5 | SDA | bidirectional | I2C serial data (bidirectional, open-drain). Requires an external pull-up resistor; may be wire-OR'd with other open-drain devices on the bus. |
| 6 | SCL | input | I2C serial clock input. Data is clocked into the EEPROM on the positive edge and out on the negative edge. Max 400 kHz at 1.8V/2.5V/2.7V, 1 MHz at 5V. |
| 7 | WP | input | Write-Protect input. Tie to GND for normal read/write; tie to VCC to hardware-protect the full 8K array against writes. |
| 8 | VCC | power_in | Supply voltage input, 1.7 V to 5.5 V. Typical ICC = 0.4 mA (read @100 kHz), 2.0 mA (write @100 kHz); standby current ≤ 2 µA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
Ordering variants
HX24C08DRGHX24C08DRGPGHX24C08DRGDGKRGHX24C08DRGDBVRGHX24C08DRGDDFRG
CAD (KiCad official)
- Symbol:
HX24C08DRG - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HANSCHIP semiconductor datasheet (None pp, sha256
8b39cc16ac1b07de, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).