3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC5213-2.5YC5-TR
Microchip Tech · Linear Voltage Regulators (LDO) · SC-70-5
MIC5213-2.5YC5-TR from Microchip Tech, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | TTL/CMOS compatible enable input: logic high enables the regulator, while logic low or open puts it in shutdown. |
| 2 | NC | unconnected | Not internally connected. |
| 3 | GND | power_in | Ground. |
| 4 | OUT | power_out | Regulator output. |
| 5 | IN | power_in | Supply input, rated 2.5V to 16V per the operating ratings. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SC-70-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | VO | -3 | 3 | % | 3 | ||
| Output Voltage Accuracy (-40°C to +125°C) | VO | -4 | 4 | % | bold values: -40°C ≤ TJ ≤ +125°C | 3 | |
| Line Regulation | ∆VO/VO | 0.008 | 0.3 | % | VIN = VOUT + 1V to 16V | 3 | |
| Line Regulation (-40°C to +125°C) | ∆VO/VO | 0.5 | % | bold values: -40°C ≤ TJ ≤ +125°C | 3 | ||
| Load Regulation | ∆VO/VO | 0.08 | 0.3 | % | IL = 0.1mA to 80mA, Note 6 | 3 | |
| Load Regulation (-40°C to +125°C) | ∆VO/VO | 0.5 | % | bold values: -40°C ≤ TJ ≤ +125°C | 3 | ||
| Output Voltage Temperature Coefficient | ∆VO/∆T | 50 | 200 | ppm/°C | Note 5 | 3 | |
| Dropout Voltage | VIN-VO | 20 | mV | IL = 100µA, Note 7 | 3 | ||
| Dropout Voltage | VIN-VO | 200 | 350 | mV | IL = 20mA, Note 7 | 3 | |
| Dropout Voltage | VIN-VO | 250 | mV | IL = 50mA, Note 7 | 3 | ||
| Dropout Voltage | VIN-VO | 280 | 600 | mV | IL = 80mA, Note 7 | 3 | |
| Quiescent Current | IQ | 0.01 | 10 | µA | VEN ≤ 0.4V (shutdown) | 3 | |
| Ground Pin Current | IGND | 180 | µA | IL = 100µA, VEN ≥ 2.0V (active) | 3 | ||
| Ground Pin Current | IGND | 225 | 750 | µA | IL = 20mA, VEN ≥ 2.0V (active) | 3 | |
| Ground Pin Current | IGND | 850 | µA | IL = 50mA, VEN ≥ 2.0V (active) | 3 | ||
| Ground Pin Current | IGND | 1800 | 3000 | µA | IL = 80mA, VEN ≥ 2.0V (active) | 3 | |
| Ground Pin Current in Dropout | IGNDDO | 200 | 300 | µA | VIN = VOUT(nominal), 0.5V, Note 8 | 3 | |
| Current Limit | ILIMIT | 180 | 250 | mA | VOUT = 0V | 3 | |
| Thermal Regulation | ∆VO/∆PD | 0.05 | %/W | Note 9 | 3 | ||
| Enable Input Voltage Logic Low (off) | VIL | 0.6 | V | Logic Low (off) | 3 | ||
| Enable Input Voltage Logic High (on) | VIH | 2 | V | Logic High (on) | 3 | ||
| Enable Input Current | IIL | 0.01 | 1 | µA | VIL ≤ 0.6V | 3 | |
| Enable Input Current | IIH | 8 | 50 | µA | VIH ≥ 2.0V | 3 | |
| Input Supply Voltage | VIN | -20 | 20 | V | 2 | ||
| Enable Input Voltage | VEN | -20 | 20 | V | 2 | ||
| Storage Temperature Range | TS | -60 | 150 | °C | 2 | ||
| Lead Temperature (Soldering, 5 sec.) | 260 | °C | Soldering, 5 sec. | 2 | |||
| Input Voltage | VIN | 2.5 | 16 | V | 2 | ||
| Enable Input Voltage | VEN | 0 | V | max = VIN | 2 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 2 | ||
| Junction-to-Ambient Thermal Resistance (SC-70-5) | θJA | 450 | °C/W | mounted on a PC board | 3 |
CAD (KiCad official)
- Symbol:
MIC5213-2.5YC5-TR - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
mic5213-2-5yc5-tr-etched.step/mic5213-2-5yc5-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic5213-2-5yc5-tr.step/mic5213-2-5yc5-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (8 pp, sha256
35b3d2db35d0a728, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).