component
BQ294700DSGR
Public Made by Adomby adom
Texas Instruments Battery Management, WSON-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownBQ294700DSGR
Texas Instruments · Battery Management · WSON-8-EP(2x2)
BQ294700DSGR from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input, operating range 3V to 20V per recommended operating conditions. |
| 2 | V4 | input | Analog input for detection of fourth cell positive voltage (top cell in 4S configuration), 0V to 5V range relative to VSS. |
| 3 | V3 | input | Analog input for detection of third cell positive voltage, 0V to 5V range relative to VSS. |
| 4 | V2 | input | Analog input for detection of second cell positive voltage, 0V to 5V range relative to VSS. |
| 5 | V1 | input | Analog input for detection of first cell positive voltage (bottom cell), 0V to 5V range relative to VSS. |
| 6 | VSS | power_in | Ground reference connected to IC ground and negative terminal of lowest cell in battery pack; voltage reference for all cell comparisons. |
| 7 | CD | output | External delay timer capacitor connection (0.1µF to 1.0µF nominal), charged and discharged by IC to set overvoltage protection delay of 1s to 2s. |
| 8 | OUT | output | Overvoltage fault signal output, active-high CMOS logic (6V high, 250-400mV low) for BQ294700 variant with 4.5mA source and 14mA sink current capability. |
| 9 | PWPD | power_in | Exposed thermal pad for improved thermal dissipation; must be soldered to VSS or ground plane on PCB for thermal performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
BQ294700DSGR - Footprint:
Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm - 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
bq294700dsgr-etched.step/bq294700dsgr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);bq294700dsgr.step/bq294700dsgr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
0bb66de94396f561, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).