Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MC7805CD2TR4G

onsemi · Linear Voltage Regulators (LDO) · TO-263-2

MC7805CD2TR4G from onsemi, in a TO-263-2. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Input power_in Unregulated input voltage; the input must remain typically 2.0 V above the output voltage even during the low point of the input ripple voltage.
2 Ground power_in Common ground, required between the input and output voltages; the heatsink surface (terminal 4 in the case outline drawing) is connected to this pin.
3 Output power_out Regulated 5.0 V output; an output capacitor of at least 0.1 µF is needed, since values below 0.1 µF could cause instability.

Key specifications

Parameter Value
Manufacturer onsemi
Package TO-263-2
Category Power Management ICs
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage (TJ = 25°C) VO 4.8 5 5.2 Vdc TJ = 25°C 3
Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W), 7.0 Vdc ≤ Vin ≤ 20 Vdc VO 4.75 5 5.25 Vdc 5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W, 7.0 Vdc ≤ Vin ≤ 20 Vdc 3
Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W), 8.0 Vdc ≤ Vin ≤ 20 Vdc VO 4.75 5 5.25 Vdc 5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W, 8.0 Vdc ≤ Vin ≤ 20 Vdc 3
Line Regulation Regline 0.5 20 mV 7.5 Vdc ≤ Vin ≤ 20 Vdc, 1.0 A 3
Line Regulation Regline 0.8 10 mV 8.0 Vdc ≤ Vin ≤ 12 Vdc 3
Load Regulation Regload 1.3 25 mV 5.0 mA ≤ IO ≤ 1.0 A 3
Quiescent Current IB 3.2 6.5 mA 3
Quiescent Current Change IB 0.3 1 mA 7.0 Vdc ≤ Vin ≤ 25 Vdc 3
Quiescent Current Change IB 0.08 0.8 mA 5.0 mA ≤ IO ≤ 1.0 A (TA = 25°C) 3
Ripple Rejection RR 62 83 dB 8.0 Vdc ≤ Vin ≤ 18 Vdc, f = 120 Hz 3
Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO 2 Vdc IO = 1.0 A, TJ = 25°C 3
Output Noise Voltage (TA = 25°C) Vn 10 V/VO TA = 25°C, 10 Hz ≤ f ≤ 100 kHz 3
Output Resistance rO 0.9 m f = 1.0 kHz 3
Short Circuit Current Limit (TA = 25°C) ISC 0.6 A TA = 25°C, Vin = 35 Vdc 3
Peak Output Current (TJ = 25°C) Imax 2.2 A TJ = 25°C 3
Average Temperature Coefficient of Output Voltage TCVO -0.3 mV/°C 3
Input Voltage (5.0 − 18 V) VI 35 Vdc Input Voltage (5.0 − 18 V) row of Maximum Ratings 1
Operating Junction Temperature TJ 150 °C 1
Storage Junction Temperature Range Tstg -65 150 °C 1
Thermal Resistance, Junction-to-Case RJC 5 °C/W Junction-to-Case, Maximum Ratings table (same value across 369C, 221A and 936 columns) 1
Operating Junction Temperature Range (ordering, MC7805CD2TR4G) TJ 0 125 °C TJ = 0°C to +125°C, D2PAK, MC7805CD2TR4G ordering entry 21

CAD (KiCad official)

  • Symbol: MC7805CD2TR4G
  • Footprint: Package_TO_SOT_SMD:TO-263-2
  • 3D model: TO-263-2 (KiCad packages3D, STEP)
  • 3D model files: mc7805cd2tr4g-etched.step / mc7805cd2tr4g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mc7805cd2tr4g.step / mc7805cd2tr4g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (29 pp, sha256 0d716b89ee95cd63, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF