3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA148UA
Texas Instruments · Differential Amplifiers · SOIC-8
INA148UA from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference voltage input where VOUT = (+IN) - (-IN) + VREF; requires source impedance ≤ 5Ω to maintain 86dB CMRR. |
| 2 | -IN | input | Inverting differential input rated for ±200V continuous and ±500V peak (0.1s); common-mode input range ±200V (dual supply ±15V), ±100V (dual supply ±5V), or -47.5V to +75V (single supply +5V). |
| 3 | +IN | input | Non-inverting differential input rated for ±200V continuous and ±500V peak (0.1s); common-mode input range ±200V (dual supply ±15V), ±100V (dual supply ±5V), or -4V to +32.5V (single supply +5V). |
| 4 | V- | power_in | Negative power supply rail; rated ±1.35V to ±18V (dual supply) or GND (single supply mode); absolute maximum ±18V dual or 36V single supply. |
| 5 | NC | unconnected | No connection pad; leave unconnected. |
| 6 | OUT | output | Differential amplifier output; voltage swing (V-) + 0.5V to (V+) - 1.5V with RL = 10kΩ load; short-circuit current ±13mA (SHE process) or ±20mA (TID process) continuous. |
| 7 | V+ | power_in | Positive power supply rail; rated ±1.35V to ±18V (dual supply) or 2.7V to 36V (single supply); use low-ESR bypass capacitor connected close to pin. |
| 8 | NC | unconnected | No connection pad; leave unconnected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, dual supply (absolute maximum) | VS | 18 | V | Dual supply, VS = (V+) – (V–); printed as ±18 | 3 | ||
| Supply voltage, single supply (absolute maximum) | VS | 36 | V | Single supply, VS = (V+) – 0V | 3 | ||
| Signal input pins, continuous | 200 | V | Continuous; printed as ±200 | 3 | |||
| Signal input pins, peak | 500 | V | Peak, 0.1 s; printed as ±500 | 3 | |||
| Operating temperature (absolute maximum) | TA | -55 | 125 | °C | 3 | ||
| Storage temperature | Tstg | -55 | 125 | °C | 3 | ||
| Junction temperature | 150 | °C | 3 | ||||
| Lead temperature (soldering) | 300 | °C | Soldering, 10 s | 3 | |||
| Supply voltage, single supply (recommended) | VS | 2.7 | 30 | 36 | V | Single supply | 3 |
| Supply voltage, dual supply (recommended) | VS | 1.35 | 15 | 18 | V | Dual supply; printed as ±1.35 / ±15 / ±18 | 3 |
| Rated operating temperature range | -40 | 85 | °C | 3 | |||
| Junction-to-ambient thermal resistance | θJA | 150 | °C/W | D (SOIC), 8 pin | 3 | ||
| Input offset voltage (RTI) | VOS | -5 | 1 | 5 | mV | VS = ±15V | 4 |
| Power-supply rejection ratio (RTI) | PSRR | -400 | 50 | 400 | µV/V | VS = ±1.35V to ±18V; CSO: SHE | 4 |
| Power-supply rejection ratio (RTI) | PSRR | -80 | 3.5 | 80 | µV/V | VS = ±1.35V to ±18V; CSO: TID | 4 |
| Common-mode voltage range | VCM | -200 | 200 | V | VO = 0V; VS = ±15V | 4 | |
| Common-mode voltage range | VCM | -100 | 100 | V | VO = 0V; VS = ±5V | 4 | |
| Common-mode voltage range | VCM | -47.5 | 32.5 | V | VO = 0V; VS = +5V(3), VREF = VS / 2 | 4 | |
| Common-mode voltage range | VCM | -4 | 75 | V | VO = 0V; VS = +5V(3), VREF = 0.25V | 4 | |
| Common-mode rejection ratio | CMRR | 70 | 86 | dB | VS = ±15 V, VCM = –200 V to 200V, RS = 0Ω | 4 | |
| Gain error | GE | -0.075 | 0.01 | 0.075 | % | VO = (V–) + 0.5V to (V+) – 1.5V | 4 |
| Gain error drift | -10 | 3 | 10 | ppm/°C | TA = -40°C to +85°C | 4 | |
| Gain nonlinearity | -0.002 | 0.001 | 0.002 | % FSR | VO = (V–) + 0.5V to (V+) – 1.5V; VS = ±15V | 4 | |
| Capacitive load drive | CL | 10 | nF | Steady-state operation | 4 | ||
| Quiescent current | IQ | 260 | 300 | µA | VIN = 0V; printed as ±260 / ±300 | 5 |
CAD (KiCad official)
- Symbol:
INA148UA - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ina148ua-etched.step/ina148ua-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina148ua.step/ina148ua.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (25 pp, sha256
672c32261ac8f8b9, retrieved 2026-10-01, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).