3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdown1ED3123MU12HXUMA1
Infineon Technologies · Gate Drivers · SOIC-8-300mil
1ED3123MU12HXUMA1 from Infineon Technologies, in a SOIC-8-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Logic input supply voltage with a 3.3 V to 15 V wide operating range (Table 5 gives VCC1 as 3.1 V to 15 V). |
| 2 | IN+ | input | Non-inverted control input (active high) with an internal noise filter and an internal weak pull-down that favors the off-state; logic thresholds are VIH min 2.5 V and VIL max 1.1 V. |
| 3 | IN- | input | Inverted control input (active low) with an internal noise filter and an internal weak pull-up that favors the off-state; logic thresholds are VIH min 2.5 V and VIL max 1.1 V. |
| 4 | GND1 | power_in | Logic ground connection of the input circuit, to which the absolute maximum and input ratings are referred. |
| 5 | VEE2 | power_in | Reference ground of the output driving circuit, connected to the negative supply in a bipolar supply configuration. |
| 6 | OUT- | output | Driver sink output that turns off the external IGBT by switching to VEE2 in the off-state, with an active shut-down keeping the output low during UVLO. |
| 7 | OUT+ | output | Driver source output that turns on the external IGBT by switching to VCC2 in the on-state, and is turned off at an UVLO event. |
| 8 | VCC2 | power_in | Positive power supply of the output driving circuit, with an operating range of 10 V to 35 V referred to VEE2, and a blocking capacitor to be placed close to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | SOIC-8-300mil |
| Category | Motor Driver ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input to output offset voltage | VOFFSET | 2300 | V | VVEE2,max-VVEE2,min with VVEE2,max ≥ VGND1 ≥ VVEE2,min | 11 | ||
| Power supply output side | VVCC2 | -0.3 | 40 | V | 11 | ||
| Power supply input side | VVCC1 | -0.3 | 17 | V | VCC1 - GND1 | 11 | |
| Logic input voltages (IN+, IN-) | VIN | -0.3 | 6.5 | V | IN - GND1 | 11 | |
| Junction temperature | TJ | -40 | 150 | °C | 11 | ||
| Storage temperature | TStg | -55 | 150 | °C | 11 | ||
| Power dissipation (input side) | PD,IN | 100 | mW | TA = 65°C | 11 | ||
| Power dissipation (output side) | PD,OUT | 700 | mW | TA = 65°C | 11 | ||
| ESD robustness, human body model | VESD,HBM | 4 | kV | Human body model | 11 | ||
| Thermal resistance junction to ambient | RthJA,OUT | 88 | K/W | TA = 85°C 300 mil, 1s0p, PJ = 266 mW | 11 | ||
| Characterization parameter junction to package top, input side | ΨJtop | 6 | K/W | 11 | |||
| Power supply output side | VVCC2 | 10 | 35 | V | with respect to VEE2 | 12 | |
| Power supply input side | VVCC1 | 3.1 | 15 | V | 12 | ||
| Logic input voltages (IN+, IN-) | VIN | -0.3 | 5.5 | V | 12 | ||
| Switching frequency | fSW | 1 | MHz | PD applies | 12 | ||
| Ambient temperature | TA | -40 | 125 | °C | 12 | ||
| Common mode transient immunity | CMTI | -200 | 200 | kV/µs | VOFFSET,test = 1500 V | 12 | |
| UVLO threshold input side (on) | VUVLOH1 | 3.1 | V | 13 | |||
| UVLO threshold input side (off) | VUVLOL1 | 2.5 | V | 13 | |||
| UVLO hysteresis input side | VHYS1 | 0.1 | 0.2 | V | 13 | ||
| UVLO threshold output side (off) | VUVLOL2,1 | 8 | V | 1ED3120MU12H, 1ED3122MU12H, 1ED3123MU12H | 13 | ||
| UVLO threshold output side (on) | VUVLOH2,1 | 10 | V | 1ED3120MU12H, 1ED3122MU12H, 1ED3123MU12H | 13 | ||
| UVLO hysteresis output side | VHYS2 | 0.8 | V | 13 | |||
| Quiescent current input side | IQ1 | 1.1 | mA | static, output low | 13 | ||
| Quiescent current output side | IQ2 | 2 | mA | 13 | |||
| Start up time | tSTART | 2.5 | 20 | µs | 13 | ||
| UVLO detection filter time | tUVLOflt | 50 | ns | 13 | |||
| IN+, IN- low input threshold voltage | VIN,L | 1.1 | V | 13 | |||
| IN+, IN- high input threshold voltage | VIN,H | 2.5 | V | 13 | |||
| IN+, IN- low/high hysteresis | VIN,HYS | 0.5 | 0.8 | V | 13 | ||
| IN+, IN- input current | IIN | 100 | µA | VVCC1 = 5 V; VIN ≤ VVCC1 | 13 | ||
| High level output peak current | IOUT,H | 6 | 13.5 | A | VCC2-OUT+ = 15 V, Output on | 14 | |
| High level output on resistance | RDSON,H | 0.27 | 0.45 | 0.65 | Ω | IOUT,H = 0.1 A | 14 |
| Low level output peak current | IOUT,L | 6 | 14 | A | OUT--VEE2 = 15 V, Output off | 14 | |
| Low level output on resistance | RDSON,L | 0.21 | 0.35 | 0.6 | Ω | IOUT,L = 0.1 A | 14 |
| High level output voltage | ΔVOUT,H | 0.3 | V | VCC2-VOUT,H; IOUT = 20 mA | 14 | ||
| Low level output voltage | ΔVOUT,L | 0.1 | V | VCC2-VOUT,H; IOUT = 20 mA | 14 | ||
| Short circuit clamp voltage between OUT+/CLAMP and VCC2 | VCLP | 2 | V | Output on, IOUT = 500 mA, t < 10 µs | 14 | ||
| Input to output propagation delay ON | tPDON | 80 | 90 | 100 | ns | CLOAD = 100 pF, IN turn-on threshold to 10% output on | 15 |
| Input to output propagation delay OFF | tPDOFF | 80 | 90 | 100 | ns | CLOAD = 100 pF, IN turn-off threshold to 90% output off | 15 |
| Input to output propagation delay distortion | tPDISTO | -5 | 0 | 5 | ns | tPDOFF - tPDON | 16 |
| Input pulse suppression time (filter time) | tINFLT | 30 | ns | shorter pulses will not propagate to the output | 16 | ||
| Minimum input pulse length | tMININ | 40 | ns | 16 | |||
| Input to output propagation delay variation due to temperature | tPD,T | 14 | ns | 16 | |||
| Input to output propagation delay distortion variation due to temperature | tPDISTO,T | 3 | ns | 16 | |||
| Input to output, part to part propagation delay ON variation | /tPDon,P2P/ | 7 | ns | CLOAD = 100 pF | 16 | ||
| Rise time | tRISE | 15 | ns | CLOAD = 100 pF | 16 | ||
| Fall time | tFALL | 15 | ns | CLOAD = 100 pF | 16 | ||
| Rise time | tRISE | 30 | ns | CLOAD = 1 nF | 16 | ||
| Fall time | tFALL | 30 | ns | CLOAD = 1 nF | 16 | ||
| Active shut down voltage, cold | VACTSD,C | 1.9 | V | IOUT = 10 mA; VCC2 unsupplied; TA < 20°C | 16 | ||
| Active shut down voltage, hot | VACTSD,H | 1.7 | V | IOUT- = 10 mA; VCC2 unsupplied; TA ≥ 20°C | 16 |
CAD (KiCad official)
- Symbol:
1ED3123MU12HXUMA1 - Footprint:
Package_SO:SOIC-8_7.5x5.85mm_P1.27mm - 3D model: SOIC-8-300mil (KiCad packages3D, STEP)
- 3D model files:
1ed3123mu12hxuma1-etched.step/1ed3123mu12hxuma1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);1ed3123mu12hxuma1.step/1ed3123mu12hxuma1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon Technologies datasheet (20 pp, sha256
dbbdbb24e964046a, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).