component
LP6460B6F
Public Made by Adomby adom
LOWPOWER DC-DC Converters, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLP6460B6F
LOWPOWER · DC-DC Converters · SOT-23-6
LP6460B6F from LOWPOWER, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BST | power_in | High-side gate drive boost input; connect a 0.1uF or greater capacitor from SW to BS to power the high-side switch. |
| 2 | GND | power_in | Ground reference for the device. |
| 3 | FB | input | Feedback input connected to the center point of the external resistor divider; normal voltage for this pin is 0.6V. |
| 4 | EN | input | Enable control input; drive above 1.2V to turn the channel on and below 0.4V to turn it off. |
| 5 | VIN | power_in | Voltage supply input; the datasheet specifies an input voltage range of 4.5V to 16V. |
| 6 | SW | output | Switch-mode connection to the inductor, connected to the drains of the internal main and synchronous power MOSFET switches. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
LP6460B6F - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
lp6460b6f-etched.step/lp6460b6f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp6460b6f.step/lp6460b6f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LOWPOWER datasheet (10 pp, sha256
d882a6682da7d009, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).