Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

M24C02-FMN6P

STMicroelectronics · EEPROM · SOIC-8

M24C02-FMN6P from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 E0 input Chip Enable input that sets bit b1 of the 7-bit device select code; it must be tied to VCC or VSS, and it reads as low if left floating.
2 E1 input Chip Enable input that sets bit b2 of the 7-bit device select code; it must be tied to VCC or VSS, and it reads as low if left floating.
3 E2 input Chip Enable input that sets bit b3 of the 7-bit device select code; it must be tied to VCC or VSS, and it reads as low if left floating.
4 VSS power_in Ground; the reference for the VCC supply voltage.
5 SDA bidirectional Serial data I/O; an open-drain output that requires a pull-up resistor to VCC and may be wire-OR'ed with other open-drain or open-collector signals on the bus.
6 SCL input Serial clock input that strobes data in on SDA and clocks data out on SDA, with a maximum operating clock frequency of 400 kHz.
7 WC input Write Control input; driving it high disables writes to the entire memory array (device select and address bytes are still acknowledged, data bytes are not), while driving it low or leaving it floating enables writes.
8 VCC power_in Supply voltage: for the M24C02-F it operates from 1.7 V to 5.5 V over the full temperature range (1.6 V to 1.7 V only over the reduced 0 °C to 85 °C range), and a decoupling capacitor of about 10 nF to 100 nF should be placed close to the VCC/VSS pins.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOIC-8
Category Memory
Pins 8

CAD (KiCad official)

  • Symbol: M24C02-FMN6P
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: m24c02-fmn6p-etched.step / m24c02-fmn6p-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m24c02-fmn6p.step / m24c02-fmn6p.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (42 pp, sha256 943c0b9f52652f9b, retrieved 2026-10-08, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF