Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

XD7705B

XINLUDA · Analog To Digital Converters (ADC) · DIP-16

XD7705B from XINLUDA, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SCLK input Serial clock input for reading and writing the on-chip registers, with Schmitt-trigger thresholds (VT+ 1.4 to 3 V and VT- 0.8 to 1.4 V at VDD=5 V; VT+ 1 to 2.5 V and VT- 0.4 to 1.1 V at VDD=3 V).
2 XI input Clock input for a crystal or external master clock, with a master clock range of 400 to 2500 kHz; input low/high levels are 0.8 V / 3.5 V at 5 V and 0.4 V / 2.5 V at 3 V.
3 XO output Clock output for the crystal oscillator (connects to the crystal circuit at XI).
4 CSN input Chip select, active low; registers can only be read or written while CSN is pulled low and CSN should be pulled high after the access.
5 RESET input Reset, active low; pulling it low resets all logic, digital filters and modulators and sets registers to default, with a minimum pulse width of 100 ns.
6 AIN2P input Differential analogue positive input for channel 2; absolute/common-mode range is -0.03 V to VDD+0.03 V with the buffer disabled (BUFEN=0) and 0.05 V to VDD-1.5 V with the buffer enabled (BUFEN=1).
7 AIN1P input Differential analogue positive input for channel 1; absolute/common-mode range is -0.03 V to VDD+0.03 V with the buffer disabled (BUFEN=0) and 0.05 V to VDD-1.5 V with the buffer enabled (BUFEN=1).
8 AIN1N input Differential analogue negative input for channel 1; absolute/common-mode range is -0.03 V to VDD+0.03 V with the buffer disabled (BUFEN=0) and 0.05 V to VDD-1.5 V with the buffer enabled (BUFEN=1).
9 REFINP input Positive input of the differential reference voltage; the datasheet requires REFINP to be greater than REFINN, with a reference of 1.225 V at 3 V supply or 2.5 V at 5 V supply, and references below 1 V raise output noise.
10 REFINN input Negative input of the differential reference voltage; the reference voltage range is 0 to VDD and REFINN must be less than REFINP.
11 AIN2N input Differential analogue negative input for channel 2; absolute/common-mode range is -0.03 V to VDD+0.03 V with the buffer disabled (BUFEN=0) and 0.05 V to VDD-1.5 V with the buffer enabled (BUFEN=1).
12 OKL output Conversion-complete flag output: low means the ADC result register has been updated and can be read, high means conversion or update is in progress and data must not be read.
13 DOUT output Serial data output, shifting the result MSB first with data updated on the falling edge of SCLK.
14 DIN input Serial data input, written on the rising edge of SCLK with a setup time of 30 ns and hold time of 20 ns.
15 VDD power_in Power supply, 3 V or 5 V operating voltage with ±5% range; absolute maximum is -0.3 V to 7 V.
16 GND power_in Ground pin.

Key specifications

Parameter Value
Manufacturer XINLUDA
Package DIP-16
Category Data Acquisition
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Logic Supply Voltage VDD -0.3 7 V TA=+25℃ unless otherwise stated 3
Operating Temperature Range Topr -40 85 ℃ TA=+25℃ unless otherwise stated 3
Storage temperature range Tstg -45 125 ℃ TA=+25℃ unless otherwise stated 3
Junction temperature Tj 125 ℃ TA=+25℃ unless otherwise stated 3
Electrostatic discharge (ESD) Human-body model (HBM) 2000 V Human-body model (HBM) 3
Analogue input voltage Vin -0.3 V TA=+25℃ unless otherwise stated; printed max is VDD+0.3 3
Digital output voltage Vout -0.3 V TA=+25℃ unless otherwise stated; printed max is VDD+0.3 3
Integral nonlinearity 0 0.01 %of FSR Unless otherwise stated, VDD=+5V, REF=2.5V; TA=25℃ 3
Bipolar negative full scale error 0 0.01 %of FSR/℃ Unless otherwise stated, VDD=+5V, REF=2.5V; TA=25℃ 3
REF IN Absolute/Common Mode Voltage 0 V Unless otherwise stated, VDD=+5V, REF=2.5V; TA=25℃; printed max is VDD 3
AIN Absolute/Common Mode Voltage -0.03 V BUFEN=0; printed max is VDD+0.03 3
AIN Absolute/Common Mode Voltage 0.05 V BUFEN=1; printed max is VDD-1.5 3
AIN Differential voltage Unipolar input 0 V Unipolar input; printed max is VREP/GAIN 3
REFINP-REFINN Difference 1 1.75 V VDD=3V, Vref=1.225V 3
REFINP-REFINN Difference 1 3.5 V VDD=5V, Vref=2.5V 3
VIL input low level VIL 0.8 V VDD=5V 4
VIL input low level VIL 0.4 V VDD=3V 4
VIH input high level VIH 2 V 4
Schmitt trigger input (SCLK) positive threshold VT+ 1.4 3 V VDD=5V 4
Schmitt trigger input (SCLK) negative threshold VT_ 0.8 1.4 V VDD=5V 4
Schmitt trigger input (SCLK) hysteresis VT+-VT_ VT+, VT_ 0.4 0.8 V VDD=5V 4
Schmitt trigger input (SCLK) positive threshold VT+ 1 2.5 V VDD=3V 4
Schmitt trigger input (SCLK) negative threshold VT_ 0.4 1.1 V VDD=3V 4
Schmitt trigger input (SCLK) hysteresis VT+ VT_ VT+ VT_ 0.375 0.8 V 4
XI input low level 0.8 V VDD=5V 4
XI input high level 3.5 V VDD=5V 4
XI input low level 0.4 V VDD=3V 4
XI input high level 2.5 V VDD=3V 4
Power-down mode current 16 uA VDD=5V, XI=0V/VDD 4
Power-down mode current 8 uA VDD=3V, XI=0V/VDD 4
Master Clock Frequency fCLKIN 400 2500 kHz 5
Slck↓→DIN Effective acquisition interval tdo 0 80 ns VDD=5V 5
Slck↓→DIN Effective acquisition interval tdo 0 100 ns VDD=3V 5
SCLK↑ Post-bus withdrawal time tsout 10 60 ns VDD=5V 5

CAD (KiCad official)

  • Symbol: XD7705B
  • Footprint: Package_DIP:DIP-16_W7.62mm
  • 3D model: DIP-16 (KiCad packages3D, STEP)
  • 3D model files: xd7705b-etched.step / xd7705b-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xd7705b.step / xd7705b.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XINLUDA datasheet (12 pp, sha256 91725263468fc1bc, retrieved 2026-11-11, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF